Installing a 6.4 SRT Hemi in my Jeep Wrangler!
Автокөліктер мен көлік құралдары
Full Parts List: docs.google.com/spreadsheets/...
Its time to install the 6.4 SRT engine into my Jeep Wrangler!!
I have a 2010 Jeep Wrangler Rubicon that ive owned for multiple years, it came with the 3.8L engine. The engine has held up well over time, however once i added one ton axles and 40s.... I was on the quest for more power. And 485Hp should sure solve that!
In the first video of the Jeep Hemi swap video series we took a look at what engines/trans and years to pick from. I am using the 6.4L (392) LX (car based) hemi, and pairing it with a 8HP70 8 speed transmission from a dodge 1500.
Almost everything i am doing in this series will be the same as a 5.7 VVT Hemi swap as well. The 5.7 is cheaper, and easier to find used. It still puts out a ton of power, and you could always throw a cam in it to bump up the HP.
Jeep Wranglers are a lot of fun with V8 swaps! But paying a shop is not.... This swap will not be cheap, however we can save thousands by doing this at home (and at your own pace and budget).
The LS swap is another option, however to retain all factory Jeep controls it can be just as expensive as a 5.7 swap, and requires the use of a lot of Canbus adapters which can fail over time.
Its time to remove the old Jeep engine and start up the modifications needed to fit this big Hemi in the Wrangler! We have to remove the factory battery tray, move the steering mount in the firewall over, remove the old power steering reservoir, and well... Thats about it!
The 8HP70 (8 speed) is a game changer! A hemi with a 5 speed is already great, but 3 extra gears makes it even better! This is something i would highly recommend to anyone that had a 3.8. If you currently have the 3.6 with auto trans, you can always reuse your NAG1 trans with a new bellhousing and Torque convertor- the choice is yours!
I am using parts from Jeep Speed Shop. They are a small company in CA, specializing in hemi swaps. Todd, the owner is very knowledgeable of these swaps, and makes really great parts.
They can be hard to get a hold of... They operate on only a few employees so be patient if you leave him a message or text.
Jeep speed shop (JSS) has a few build of material lists (BOM) on the website if you are wondering what all parts you need. I will include the link below.
Parts:
Engine Leveler (You will need one): amzn.to/3qjmKMh
Engine Hoist: 2 ton from harbor freight
3/4x16 Tap: amzn.to/3plFpWB
Exhaust Manifold Right: amzn.to/2N874x0
Exhaust Manifold Left: amzn.to/3djOwEG
Steering Relocation: jeepspeedshop.com/product/ste...
Intermediate Plate (Between trans and engine)- 52104344aa
Transmission Structural support (Get bolts if needed): www.moparpartsgiant.com/parts...
Oil Filter Relocation: www.moparautopartsdirect.com/...
Rear Sump Oil pan for 6.4: www.mymoparparts.com/oem-part...
Transmission Cooler Lines: 68291875ab
Or make your own cooler lines: amzn.to/3dfmjyW amzn.to/3qwT9PT
Full kits from JSS (You will still need to source engine/trans, and all other build of material items- jeepspeedshop.com/conversion-...
BOM from JSS: jeepspeedshop.com/8-speed-and... May not open on laptop or desktop.
Thanks for watching, stay tuned for the next video
Пікірлер: 355
Thanks for watching! I’m sorry I haven’t posted in a while, work and life got really busy. But I’m back to pumping out videos. Please help me out by leaving a comment and make sure to turn notifications on so you don’t miss a video! Hemi Swap Parts List: docs.google.com/spreadsheets/d/1OL8GxdgjKzThBju5MkTYFnyWXUWvH7XhhNZi2cOSmos/edit#gid=0 Hemi Swap Playlist: kzread.info/head/PLNBgnXDC0Wj4kRsesZpKJsvYHO4A7kR9c
@craigmacc7464
3 жыл бұрын
About time I thought you quit KZread.jk
@olafstrand9965
3 жыл бұрын
Link Cassies channel please, I couldn't find it cheers
@briabbriboski59
3 жыл бұрын
@@olafstrand9965 its jeep gear and gadgets
@GamingBeast9
3 жыл бұрын
Would the 5.7 HEMI from a 2006 Dodge Durango work for this swap? Love the vids by the way!
@NomadNation
3 жыл бұрын
What are your thoughts on LS vs Hemi? What drove your decision?
Looking good Ben Jammin'.."No matter what you identify as,it ain't gonna work".lol....You got that right...😂😂👍👍
@Team_Nacho_Moto
3 жыл бұрын
Comment of the year lol
@ianl5669
3 жыл бұрын
I died when he said that !
@kpfalconi
2 жыл бұрын
Got a thumbs up just for that! Greatness!
We will never know which thumbnail is better😏 Action shot is awesome. I see you learned how to use a bucket to catch all the mess😂
@JKGearandGadgets
3 жыл бұрын
still didnt work...
@trjnsd6874
3 жыл бұрын
@@JKGearandGadgets LMAO! That was Funny! ...and very familiar...
There are a ton of engine swap videos on KZread, but I think this one is far, and away, the best one I've ever watched. You did a brilliant job of touching on all the bases. I really admire your mechanical ability.
You make the average guy feel included, like " I can do this ! Yes ! " Thank you sir.
Awesome video - thanks for taking the extra time to take us along!!! Looking forward to next one!!
Excited to see both swaps completed! Keep up the good work 💪
im more impressed that the man is doing this swap in a pair of Crocs.
Hell yea ! I’m glad to see you getting after it . Can’t wait to see it run
I really enjoyed this one. I like to see the differences between both swaps. Amazing detailed work Ben!!
Glad to see this series continue! Already did your one ton swap might have to do a hemi swap now.
Thats awesome dude !!! Thank you for clearing up the transmission/transfer case question I had.
Action shot! Awesome, you not just another crazy Hemi guy! Now your a crazy hemi guy with a bad ass Jeep!
Nice video....I get to live my dreams through your videos
Great progress. There's no need to apologize for video being too long. I'm here to watch and learn and be entertained. Great job my friend!
Cheers to Todd at JSS! Excellent resource for all things Jeep/Hemi related.
I have been anticipating the video for a while! So exciting!
so awesome ! I am looking forward to seeing you installing the 6.4L into the JT!
I definitely love the longer videos. It’s nice to set back relax and watch ole Ben get the jku ready to scream. Keep up the good work🤟🏻
Glad to have you back. Awesome 👌 job on your Hemi Swap. All you...
I'm the last guy to ever attempt a swap like this but you really broke it down and made it easy to follow. Another great video.
Big job for a DIY. Good thing you have your ASE and knowledge to accomplish the task.
Impressive swap my dude! Especially doing it solo 🤙🏻. Can’t wait to watch you crank it up once it’s ready! Congrats on 100k
Jason from Autoedits would have s*** a brick at that dirty engine bay. HAHAHA
@NomadNation
3 жыл бұрын
We LOVE Autoedits. We keep a healthy supply of Toolbox Buddy around the shop. :D
watching you series here, has kinda made me make my mind up on the swap i want to do for my JKU. love the channel and you do an amazing job with your explanations
You got more balls then me for taking this on! Nice job!
Thank you for every thing you do. You help out thousands
Looks great. Can’t wait to see the end result of both jeeps. Good luck
I’m wanting to do a 5.7 hemi swap on my 2010 JK in the next 5 years or so when I move and buy a house. I know your not doing a step by step but if I do end up doing so then I’m glad it’s you making videos like these that’ll help people like me out. Thanks and awesome stuff bro!
@AKiddGDeux
3 жыл бұрын
same, wanting to pay it off or get closer to and 5.7L and a tremec 6speed
Hey Ben , please don't apologize for the longer videos . You are a wealth of information and I'm sure it will help someone out either doing this swap or going to do this swap . I'm loving yours and Cassie's videos on the two different swaps into two different Jeeps . I have really been considering a LS swap in my 03 TJ and will make a decision soon . Keep up the great work and I'm looking forward to yours and Cassie's next videos. Take care and be safe sir.
Man, thanks for taking the time to be so informative. I am new to the channel and very glad i found it.
that was an awesome video! I can not wait for part 2 and hearing the HEMI roar in the JK!
Ben you are goals man! Anyone can go out and send it to a shop have it done for them but not only do you do everything yourself you explain and show us what to do and what not to do. Love the contante can’t wait to see it all done.
Love watching these videos on your hemi swap. Slowly been working toward my 5.7 hemi swap into my '77 wagoneer. Going with the 8 speed mated to a sport jk transfer case, will be run off a terminator x Max system. Seeing your progress provides the hope that someday mine will have an engine in the engine compartment again. But for now, work on the axle swap continues
as stated in other comments, there's a lot to be said about someone doing their own work in a garage or out in the driveway. much respect. you don't see that too much on a lot of these youtube channels. too bad you don't live on the east coast any longer, would love to wheel with ya. maybe one day if yall ever do a fan meet and greet and wheel, i can make the trip. keep up the great work, cheers
Great video Ben! Hell of a project 💪🏼
I enjoy the long videos, looking forward to doing my swap so this is helpful
Man, This series is so helpful! I'm searching for good deals on JKUs and looking to swap right away. This is helping me find what I would need and save me money by having me buy the right Jeep to start with! Thanks, bro!
Lookin good man, I'm watching and learning as much as I can. Love your channel, you do a great job explaining everything.
Thanks for the detailed video! You make the hemi swap seem simple.
Super excited to follow your progress! The two of you rocking it solo is inspiring. Keep up the good work. Also, loved your video on using drop brackets with adjustable arms.
@brantleyping9363
3 жыл бұрын
Hemi vs LS? Thoughts?
@NomadNation
3 жыл бұрын
@@brantleyping9363 That's a good question we get a lot in our shop.
@NomadNation
3 жыл бұрын
@@brantleyping9363 We prefer LS swaps, but a lot of that comes down to personal preference and budget.
Damn, you explain everything really well. I doubt I can do this, but I enjoy watching and learning.
Nice work, thank you for all the tips. Look forward to the wiring harness install.
Currently saving up to do a 5.7+8hp70 swap. Your vids will definitely be helpful. Great Job man
You make it look easy. Sadly I have hip issues so it looks like I’ll be saving up for years to pay a shop do it. I will say that it is still fun to watch this!
Glad this was you doing the engine removal. These days, replacing the entire vehicle seems like the way to go. 😊 Thanks for the video! Already viewed the later upload, showing you doing dirt donuts with the new power plant. 👍
Very excited for you guys.
Extra thumbs up for the “I don’t care what you identify as...” comment. Hilarious! What’s Cassie’s channel? Would like to check out the LS swap too! Great channel, Ben!
@jeffwilliams840
3 жыл бұрын
Jeep Gear and Gadgets.
Awesome project! Hemi looks badass in the JK
Been waiting on this video. Nice build
Super excited for this swap!
Thanks for the good videos! Just about done with my 1 ton swap and next winter project is going to be a hemi swap.
Ben this looks good thanks for you videos and hard work regards from Iceland
Great video Ben! keep em coming brother!
Bem it is we because we are there with you in spirit because you make your videos so good... you make us feel like we're there with you
YAY Congrats On 100k :D
@JKGearandGadgets
3 жыл бұрын
Thank you so much 😀
Hell yeah! Congrats Ben!!
You have a Radio DJ voice :D Keep up the great work! This was extremely satisfying to watch!
Loved your video. After seeing it I subscribed to your channel. Looking forward to seeing more on your awesome project.
Big funny guy here keep the work up bud!
Great video lots of good detail and info
Not hard to watch at all. Very interesting and informative. You are very Good at delivering the information. I'm very impressed. Also impressed with Cassie. Her channel is awesome too. She is a true wrench. Much respect!
Loving your and Cassie's V8 swap series. Wish I had the knowledge myself to do the same thing and ditch my 3.8L. Maybe in 5 years I'll be ready. And glad to see your dropping more vids. You channel is always so informative and helpful.
@JKGearandGadgets
3 жыл бұрын
You could do it. I have confidence that almost anyone could do this
Can’t wait for the finished product.
Ben Yall broke 100K congrates man
Nice vid Ben.
You must be young - last time I pulled an engine myself it was on my '69 dodge Dart 340 - in 1974! ! I think there were a couple of wires, hoses plus a few bolts to the trans and mounts; nothing like that pile of spaghetti you're dealing with -Ha! Oil filter will fit, tightly. (Fram #PH16 or equivalent). That's the same angled filter mount that came on my 5.7 WK. Incredible job you're doing; both the swap and the documentary. Keep Cassie Classy!
I used a Holley Terminator kit on my 5.3 swap in the TJ. I can’t say enough about how impressed I am with it. Expensive but its a buy once cry once unlimited tuning option.
Great video and explanation of the process.
Good job. This is going to be great
Really appreciate the detailed explanations you provide. It must take a great deal of patience to quit working to film. I’d be chomping at the bit to just get it done.
Looks good Ben!
Always great content
I own a TJ so most of the video was not relevant however, i watched the entire thing without fast forwarding :D Gave it a thumbs up. great content and instruction.
@JKGearandGadgets
3 жыл бұрын
Thank you!
I would love to be your nosey neighbor! But here I am in Missouri hoping my 16 sport can look as good as yours one day!! Keep up the awesome videos.
Great video man!
Great vid as always. Still need to catch up on the ls swap now. For future, apply grease to the flutes of the tap to catch the chips and lube the cutters. Be surprised.
Great video !
Looks good I’m in the final stretch of nearly the same swap except manual trans
@davidgentry6880
3 жыл бұрын
Yea I'm working on getting together parts for a hemi/manual swap myself. Been doing research and getting together part numbers
Bro had me dead wit that “whatever you identify at”😂🤣
Awesome video as always! Making it tough for me to decide on doing an ls swap or a hemi swap. But I’m really interested in seeing the Holley termx for the lj. Considering going that way with the ls.
Clearly Ben has never heard of “Docking”...lol!
Awesome job. Unbelievable. A dream some day I'll love to make true on my jk.
Khal srt be going crazy with the swap
Thanks for the info its really useful for every one
Great info. Thanks for sharing Ben. 🤟
The thing that holds the radiator is a core support. Those cast exhaust manifolds leave a lot of room for improvement. The cost of an upgrade can put a big dent in you savings account. That 392 looks like its found a home under your hood. Beautiful
Great video thanks for sharing.
I like the fact that y'all do everything yourself you don't have shops doing everything for you for free
awesome video lots of great info...
you mentioned that you saved for a couple of years to do the swap... new goal for 2025. Hemi swap for my 2012 Jeep JKU
WOW!This was awesome!
Lookin awesome!!!
Great run through, who cares what the PC army think. Keep doin your thing🤟🏼🤟🏼🇦🇺
man! Why not more views??? this swap is wild!
Looking good
Ben lets get those Jeeps fired up get er done guys
Great progress Ben 2 ideas for you when using the tap next time use grease it lubes the tap and catches the chips in the tap flutes.on the oil filter housing can you reverse the housing on the motor or cut the flange back so you can get to the filter. Keep up the work you will have it running in no time.
Another way to keep from getting metal shavings from the tap down in there is to put wheel bearing grease on your tap. It will keep the tap lubricated but the metal will stick to the grease
TIP: If you apply grease to the tap, it will capture a lot of the shavings.