More videos about this model kzread.info/head/PLVsdJzatTm_VySzQES7XBCxJFakTUHTbY

Well done bud got it fixed right away thank you

@HorsepowerHouse

20 күн бұрын

The thanks button awaits you...

Thank you thank you thank you - I’d looked all over - I completely ignored the left side switch - the darn pig tail was partially pulled out

You can also just try cleaning to connections relating to this switch.

This video helped out a lot thank you so much

@HorsepowerHouse

Жыл бұрын

See Playlist link in the comments for more.

Thanks for posting. I'm having the same issue with my 2003 Trailblazer 250. I'll give this a try

@johnjessrock3764

3 жыл бұрын

Update. Just checked. This was exactly the problem. A wiggle of the harness and my lights come back on. My electric start works again too which is great. I'll take some time over the winter to clean it and troubleshoot further if that doesn't work, but I wanted to take the time to thank you!

@HorsepowerHouse

3 жыл бұрын

We have many more videos relating to this bike here kzread.info/head/PLVsdJzatTm_VySzQES7XBCxJFakTUHTbY

1034 thanks

I noticed your original headlight switch has just on/off, and the new one has high and low, does this effect anything? The only new ones they make for my 2000 tb 250 are the same way. Any help is appreciated.

@HorsepowerHouse

2 жыл бұрын

I have no help for you

hmmm, my kill switch on my trail boss doesn't kill the engine, it does everything else though. The switch is new too and turns the headlights on and off and will start only when in the 'on' position, which is good of course. I'll try this test to see if that brings the kill switch back to life. Thanks!

@HorsepowerHouse

3 жыл бұрын

I have seen some of these cheap "chinese" import kill switch assemblies cause problems as well - If yours is. We tried one and it made everything go haywire on one of these ATV.

@ezio8591

3 жыл бұрын

@@HorsepowerHouse nope, it's a genuine made in the USA Polaris part. I actually found 2 snipped wires coming from the harness that plugs into the switch, the previous owner clipped them for some reason. I think maybe to kill the tail light without killing the engine? So now I gotta find where those 2 wires go and splice them, hopefully that allows the kill switch to turn the engine off again.

@ezio8591

3 жыл бұрын

Update: I managed to find the other ends of the two cut wires, one was black and the other one was purple coming from the wiring harness that connects into the handlebar switch. It was just a simple task to splice them, I recommend using the butt splices with heat shrink on either ends. The engine turns off now with the flick of the kill switch and the reverse override button was also disabled. Hope this helps someone else out, if the wiggling of the switch, replacing it or cleaning it doesn't fix your problems then just follow the wires in the wiring harness and see if they're snipped or they have a cut or hole in the insulating jacket in one of the wires.

I got one of these the other day and I noticed when I flicked the on button it would start or get real close to starting gonna try unplugging it

@HorsepowerHouse

Жыл бұрын

I hope you bought it cheap.