That is pure genius!! It totally solves a problem I’ve been having on my own build…. It has never occurred to me to use the electric clutch on an a/c compressor. That alone got my subscription!

So, essentially, a hydraulic pump with a magnetic clutch? Very cool!!! Love your videos!!!

I can do what you do but you do it much faster and I really enjoy watching it's nice to have a complete machine shop an excellent to see that your ideas are fully formed nicely done

Very nice, I can think of a lot of uses that could be applied to, one being a lift gate for a pickup or maybe a hydraulic crane for loading and offloading steel or wood onto a trailer. Good work, be watching for your intended application.

It took me a minute to figure out what you were doing. I thought you were using the AC compressor but what you wanted was the magnetic clutch assembly and the housing was convenient since you could install a different shaft to couple to the hydrolic pump. Nifty home made hydrolic pump.

I'm surprised the aircon clutch holds torque that well! Nicely done. I like how you did that internal keyway.

@davidut55

11 ай бұрын

Pretty sure it won't hold the torque!

@Lucas_sGarage

10 ай бұрын

​@@davidut55I mean, it need to compress 400psi of refrigerant

This was cool just to see the tear down of and axial piston compressor. It's always fun to see the inside of things that you have only seen in animations.

Jestem pod wrażeniem pomysłów. SZACUN. Pozdrawiam z Gdańska

Nice work. I made a similar unit over 10 years ago using an ac clutch from a 1991 bronco. I made it for my 3 yard dump truck. It held strong, never slipped, and never failed. I sold that truck last year and that clutch unit was still going well. That unit you made will work great and hold up to anything you throw at it. You are the only other person I've heard of doing this. Nice work!

@user-kd8us5mh8o

4 ай бұрын

Не понимаю я по вашему пишите по нашему по русски

@davidlee-mf5yf

3 ай бұрын

@@user-kd8us5mh8o не ленись, учи английский…

@user-pv4pb1hv9n

2 ай бұрын

@@user-kd8us5mh8o Хорошая работа. Я сделал аналогичный агрегат более 10 лет назад, используя сцепление переменного тока от bronco 1991 года выпуска. Я сделал его для своего трехметрового самосвала. Он держался крепко, никогда не скользил и не выходил из строя. Я продал этот грузовик в прошлом году, и сцепление все еще работало хорошо. Этот агрегат, который вы сделали, будет отлично работать и выдержит все, что вы в него бросите. Вы единственный человек, о котором я слышал, который делает это. Отличная работа! это то что он написал. а так что слабо через переводчик перевести?

The entire video was impressive. What was most impressive is he found a scrap yard AC compressor with a working clutch.

Majster twoje konstrukcje, są MEGA~GIGA~TURBO~ZAJEFAJNE... NO😊

You just built a 5,000 dollar unit for maybe 200 bucks in parts. Hats off to you 😁❤

@user-yy6ul9xk8n

10 ай бұрын

11

@NarekStepanyan-ez8ly

8 ай бұрын

​8

@xxlalbatross3287

7 ай бұрын

knowledge equals capital 😊

@jhitt79

6 ай бұрын

Hardly $5,000 as you claim. You can buy a complete, capable, and powerful log splitter brand new for less than half of what you claim.

@aliamer214

6 ай бұрын

​@@user-yy6ul9xk8nمن المشاركات المكتوبة

Skąd ty bierzesz pomysły na takie cudeńka? Ciekawe jaki będzie efekt końcowy!!!? Czekam z niecierpliwością. Pozdrowienia dla całej ekipy.

You made a home made pto. For those that dont know what that means. It stands for powe take off. It is how hydraulic units work on things like tow trucks and other construction equipment. Very nice you are a great craftsman.

Put a heavy duty microswitch to the lever by using a "B" cam, so the microswitch become depressed when you pull the lever in either direction, thus the pump only works when needed.

What a wonderful idea I want to convert my lawnmower into fully hydraulic and this is how I’m going to do it

Genius. You just gave me the idea for building a log splitter, and other projects I have rattling around in my brain. So, thank you.

Aż się boję co żeś znowu wymyślił, lecz mimo tych obaw czekam efekt końcowy. 😎

That is the best idea ever. I have wanted to build a tracked hydraulic vehicle. I was thinking of using zero turn lawnmower transaxles.

I'm imagining some kind of tree stump annihilator. Great use of a decent clutch!

Oglądam twoje filmiki jak coś robię bardzo pomagają w sprawach technicznych . Pozdrawiam

Nicely done and entertaining video. It was not what I expected, but the repurposing of the clutch performs those functions needed for the track loader application.

First thought I had was log splitter.. Great production!

Great job! Thanks for sharing! 👍🏻👍🏻

I was waiting for you to use the A/C compressor for a pump and the pump for a motor. I was thinking high volume oil flow. But what you did works too!

Zawsze mnie zastanawia jak dużo jest / nie jest pokazane: wygląda jak robione "na żywo" wedle ogarniętej wcześniej samej zasady działania, ale pewnie jakieś liczenie, czy prototypowanie się przynajmniej zdarza. Świetna inwencja, jak zwykle :D

@miklemikle-pp6fg

Жыл бұрын

Импровизация, хорошее воображение, немного знаний в механике, обработке, свойства металлов, пару станков.

The master at work!!! 👍

Everything solid as a rock! I like that. Regards from Belgium

I picked up an alternator with a hydraulic pump attached to the back. I like the use of the clutch so you don't have the starter turning the pump while trying to start the engine.

Nice video, I like the test in the end , this goes through wood like butter ,greetings from Spain

Ya got this ya make it look easy to build understand and not a whole lot of tools thks for sharing your project with us keep making projects like this ya got this

Damn. You guys have unlimited imagination. Awesome job

Excellent work you are great mechanic.

Absolute genius idea!

Excellent work 👍👍👍Thank you for sharing. Be safe🇨🇦

This was awesome to see ....I cant wait to see the next project !!! Always something cool and interesting !!

Semua pekerjaan yang anda pertontonkan dalam video video anda memang layak untuk ditonton,dan sangat banyak menginspirasi orang lain...lanjutkan teman

That is a very nice way to modify the OEM "mower" pulley. Apparently it is common for people to modify mowers for high speed by flipping over that pulley assembly, which then has to be hacked in some such fashion. So cool!

Skills! Looking forward to following along as usual.

Helal olsun usta uzun videoyu kisa sure icinde cektiginiz icin ayrica teşekkürler elinize saglik

Wow so awesome you turn the compressor work into different types 👍👍

That is thinking outside the box and using what is available to you. Looks loke a great project coming. Well done. 👍👍👍👍👍

Nicely done. 100 points awarded :)

Wow... Pretty fantastic work, dude! 😃 Looking forward to the next parts! Stay safe there with your family! 🖖😊

Nice show of skills… common sense plays a massive role in all of this.

Браво, снимаю шляпу перед мастерами. Классный аппарат получился👍

Brilliant. Loved it.

thank you teacher❤❤❤ Great job, thank you brother. You are so talented

That’s very resourceful! I’m just trying to grasp the reason for it though. Cause a hydraulic circuit will be able to drain back to the tank when it’s not being used while the pump is still going. The only real benefit I see of this setup would be if you were running a hydraulic motor from the pump, you’d be able to start and stop it electrically.

@v8Mercury

5 ай бұрын

That is my thoughts as well.

@nikolajbutorin3984

3 ай бұрын

Он не знает принцип работы распределмтеля Либо очень плохо заводиться мотор

this is a really cool setup but can i ask why the hydraulic pump needs a clutch vs just direct drive and allowing it to run open circut? i could see the need for a clutch if this pump was on a vehicle to avoid long run times when the pump isnt needed. but why here?

I love watching your videos. Of course I don't understand anything, BUT it's very exciting, good luck and success. Greetings from Tbilisi!

Очень хорошо!

Awesome as always 👍👍. Cheers, Stuart 🇦🇺

Amazing talent and understanding of the process

verry nice !!! thats some real inspiration for my tractor loader build !!!

Very nice, and inspiring!

Quem sabe fazer fais tudo o que vem na imaginação 😎😎

I have never seen such homemade crafts in the Russian KZread segment. class

show, excelente trabalho

Große Klasse!!!👍👍👏👏

bardzo fajny projekt

Congrats to the master very talented

Great work. Anxious for next video. Greetings from Brazil.

Bạn thật sự là một kỹ sư chuẩn. Làm những điều đó rất nhiều mất nhiều thời gian của bạn và đã có một kết quả hợp lý.

1960s main frame computers used a similar setup to run magnetic tape drives. The ones with the tape reels that start and stop really fast.

Such a powerful ram, it can poke through a thin rotted plank. My finger could do that.

Is making a cnc machine on your list? Thinking of some of the fabrication you do it would be very useful. Thanks for all the videos.

My MOSTEST favorite channel.

Very excited to see what kind of tracked vehicle you're making.

Poland brother mind blowing work you are awesome ❤❤❤

Your shenanigans are strong, subed 😎💯

Молодец. Хорошая работа

I'm sure will be an amazing project

I marvel at your imagination and ingenuity

Esse compressor é bom e legal para esse tipo de projeto

az ilyen preciz szep munkat nagyon tudom szeretni mutatja a tudasodat sok minden jot neked

Freaking AWESOME!!

very nice. im starting mine today

Excellent video ! 👍

Du bist einfach super👌👍👍👍 tolles Projekt. Gruss Romano

Very impressive. Well done!

Nice work big admire of your engineering

nice job, please educate me, why the clutch, I thought most hydraulic pumps are fixed drive and the oil when no ramp or drive is needed got diverted via the valve block ?

Great video... Amazing skills.

Super cool i l❤ve your work guys Fantastic 👍😊👍

Great work as always 😄😄

Good job mister well done

Taky jsem to tak udělal.Vynikající.

Wow congratulations for the First work 😊👏👏🔝🔝

true definition of engineering

Marvelous masterpiece.

DUDE ! I subscribed, how could I not !

Muy buen video saludos

Thanks to you i got a good idea. Thank you 👍

Your temporary mounting is my definitive mounting

That really is a fantastic idea!

Yes can’t wait for next video 8n this series!

Jest moc💪💪💪

That was awesome!👍🏻🇺🇸

that was good bro! cant wait to the next one!