Thank you guys now i put air intake filter and i put another tank for oil :)

@joecook3223

4 жыл бұрын

Hey man we did this on our farm ute when the ac gas leaked out, just put air fittings on the outlet of the compressor, with a pressure switch on the clutch at 120 psi, and man do they move some air! No need for a tank on that thing, blowing up tyres with the engine at 1200rpm, the pressure switch keeps cutting out cause the compressor keeps up so easy! Might be worth trying just one compressor and seeing if you can make it rev a bit faster, cause they make awesome pressure, but they do like some speed.

@mdzukimajid6565

3 жыл бұрын

Bigo

@tuongdamvan1932

3 жыл бұрын

@@joecook3223 ppppppppp

@noorulhaque9027

4 ай бұрын

is it worth to invest on things to make this

I love that wire twist as a hose clamp...... some people don't let anything stop them and won't take no for an answer..... Awesome......

@agroman77

3 жыл бұрын

"do your best with what you have", there is no excuse for not getting things done.

Love that magnetic ground.

Es la mejor enseñanza que ha dado alguien en youtube yo intento aprender mucho aqui en este canal, a pesar de mis 72 años y he visto personas explicando algo que no creo ellos lo entiendan mis felicitaciones y eres el primero al que me voy a suscribir una lastima que solo se de un me gusta, muchisimas gracias y que la dicha te acompañe a ti y a los tuyos ah, y no se que idioma hablas pero espero que me entiendas.

@fitito500

Жыл бұрын

No es tan simple....hay cosas que en el vídeo no te van a aparecer, en estos compresores el enfriamiento viene por parte del r134 que usan para refrigerar con lo cual se mantienen en temperatura de trabajo, en este caso no tenes nada que los refrigere por ende a los dos minutos ya los tenés que pelan del calor (te lo digo porque yo ya probé uno) hay que hacerle un sistema de enfriamiento sea por una bomba de aceite con radiador y un forzador con un bulbo de temperatura para mantenerlos en temperatura de trabajo..... No les creas tanto a los chinos, son terribles chamulleros, cero honestidad intelectual. Son terribles tránsfugas

Great idea welding a compressed air cylinder, these things are certified for a reason. I would stay far far away!

@murhafsukkar9555

4 жыл бұрын

I agree. I'm a mechanic and don't feel good about it

@lazyh-online4839

3 жыл бұрын

A failure would likely just result in a loose hose or something. These can be pressure tested to about the same certainty as pro certification by using a pressure washer to pressurize the tank and verify its "stability" at higher pressures.

Nice project... unfortunately, those axial refrigeration compressors circulate a certain amount of oil in a closed AC system and they won't last too long as an air compressor because they eventually push all the oil out of the compressor and into the tank. (I've built a couple of these back in my younger days). The only ones that will work for quite a while, are the older Ford piston type compressors since you can stand them upright and keep the majority of the oil in the compressor. Other than that, nice project, and good to see you used a decent tank that won't blow up when you get a fair amount of pressure in it.😁👍 *EDIT:* Sorry, didn't see all the other comments before I posted this about the oiling. It would still be to your advantage to use regular old piston type compressors, since it will be impossible to keep moisture and contamination out of these axial units. They're just not designed for an open system like this, but you'll find that out eventually.😉

@teravolt6113

4 жыл бұрын

You mean Harrison A6 compressor? Yes, it has a dedicated sump and pump for the oil. Just like the modern Seltec TM-31 or Denso 10P30C (sump is only used in bus/coach applications nowadays).

Nice work , ive always wanted one under my hood

Man, the things you do on this channel. Amazing work! Thanks for always sharing your projects!

Wonderful work and I was impressed by the idea continued my friend

It is the best teaching that someone has given on youtube I try to learn a lot here on this channel, despite my 72 years and I have seen people explaining something that I do not think they understand my congratulations and you are the first one to whom I will subscribe It hurts that I only know about a like, thank you very much and that the happiness accompanies you and yours, and I don't know what language you speak but I hope you understand me.

@letslearnsomething30

4 жыл бұрын

Thanks bro

@tamisonsresources3396

4 жыл бұрын

Lol And he did this without saying a word. Nice

@lazyh-online4839

3 жыл бұрын

It's a good video, but if it's meant to be teaching then he should have included something about checking the welds to make sure the integrity of the tank wasn't compromised. Pressure vessel explosions are not fun.

I’ll add this suggestion only because I haven’t seen it yet. The adjuster/tensioner pulley needs to be on the out-travel side (not the pulling side) of the motors’ drive pulley so the belt engages much more diameter of the drive pulley. Less than 90 degrees contact that you have now is not good. Then switch to a slightly longer belt for 180 degrees of engagement. 🤙

@dansw0rkshop

Жыл бұрын

You can tell the two compressors are not running the same speed. (The camera frame rate makes them spin funny directions)

I think this guy 24 hours play with mechanical...maybe some people have imagination about this and impossible to do it....but this guys make it become possible...really amazing work...

I know it was a year ago bro but why did you block 6 holes already in the tank, only to go drill new holes?

@gacherumburu9958

3 жыл бұрын

To show us banggood drill bits...😂

@ricardodueck261

2 жыл бұрын

He didnt find fittings

@renleedativo1679

Жыл бұрын

Because of drill set he is introducing.

Thank you for sharing, good ingenuity, have a nice day

Nice work , those air conditioning pumps really put out .

I like your style man...recycling is the way to go....well done on another good project.

I'm just here making sure the KZread experts are still alive

I think I like this project more than the car A/C compressor converted into an engine! Whoever disliked this video, shame on you!

Se ve chuchecon compay... Saludos desde Panamá..

You trust your welding way more than I trust welding on a preacher vessel. I am going to put this in the don't try it at home kids file.

@kaisersose5549

3 жыл бұрын

As far as pressure vessels go, that one's way over safety specs for the U.S. Even if it does fail, it's not going to be catastrophic with a whole 120 PSI or so. With that volume, the pressure drops to a level that's safe to handle without PPE in just a few seconds when there's a hole the size of a straight pin.

Super cool! You make some cool stuff!

I'm so glad I watched your videos

Great job. A Frankenpressor. 👍👍👍👍

Good for you my friend, a magnificent artisan of what many would consider trash. Best of luck in your future "Masterpieces".

thank you i really enjoy your show

My family being doing this from the time I was a kid. We used old electric wash machine motors, older compressors, and even lawn mower motors.

Meets pressure vessel code...good to go...and safe!

ENDLESS AIR in Australia have been using rejigged AC compressor s under car and 4wd bonnets for years . Warranty..long lasting..just the flick of a switch..add a tank and use air tools . Comp truck often have them

beautiful! i want one!

I like the idea, its cool seing people make things from "junk". Just a couple things to be cautious of it corrosion on the inside of the air tank. The old tanks can be rusted inside which makes them weak. And the pipe that was welded into the tank looked to be galvanized. Welding fumes from welding galvanized metal can be pretty bad for you.

Thats amazing brother ..keep up the good work ..

Excelente trabajo. Gracias.

Thank you . From Mongolia

what exactly is that thread tape doing for those JIC fittings?

Dad built an air compressor in the mid seventies using a old Ford A/C compressor and powered it with a 1/3 HP motor from a discarded washing machine,used a small tank scavenged from a piece of equipment but don't remember now what from,used a pressure switch from a water pump to turn it off and on,was still working good when we sold it 12 years ago.

Once again mate. Lovely build! Now to toss the 1.5hp electric motor away for you to attach your car ac compressor motor! Portable air! Aha

c'est remarquable il faut l'avouer conception et technique un grand merci jeune homme

Parabéns!!!

That's the trickest DIY air compressor ever

Молодец. Привет из России. Лайк и подписка.

So you make combustion engines out of compressors and now you are making air compressor using engine parts :D

A work of excellence! ♥

@letslearnsomething30

4 жыл бұрын

Thank bro :)

Nice job 👌

That compressor is bad ass. 0-60 in 5 minutes that’s faster than my car!🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪

@NickEter

3 жыл бұрын

That was a joke until this dude actually made an axial engine out of one of those

Very good good job fram Pakistan

Wow this guy is smart I wish I was this smart

👍 Thank your video ...

Kooooool....thanks for the video!!

Superb very nice 👍

Its maybe nice work, but I dont understand one thing. AC compressor need to work an oil. Where is this oil in this machine? Is it without oil?

@jammdoe1873

Жыл бұрын

It requires oil but the compressor made for car so is not a lot of oil

@michalziomek1276

Жыл бұрын

@@jammdoe1873 so you get oil in the air from compressor?

You’re a clever dude

This is a great idea in theory and looks like a fun project. HOWEVER!!!! No lubrication system for the compressors is a recipe for disaster, and they will likely not run for more than 5-10 hours. MOST IMPORTANTLY those welds will CERTAINLY break and that steel tank will send shrapnel at the speed of sound in every direction and kill anything in a 20 foot radius without giving any warning before doing so. This is a dangerous way to save $300 at Home Depot.

Sounds really quiet. Nice Job.

You know, that air compressor that you made is arguably more quieter than the ones you can buy.

sanden sd5? what did they come from? i am trying to find a sd7 application

GREAT PROJECT!!! IT TAKES A LOT OF SKILLS TO BUILD SOMETHING LIKE THIS!!! THE SATISFACTION OF BEEN ABLE TO DO IT WITH YOUR OWN HANDS, !!!PRICELESS!!!

@letslearnsomething30

4 жыл бұрын

Thanks bro :)

Very,very good my friend!!!!!

@letslearnsomething30

4 жыл бұрын

Thanks bro :)

very wise words.... "make your food your medicine" .. so true....

NICE WORK

No ground wire? You are a brave man!

those ac compressors need oil which would normally be mixed with the freon . now the compressors are oilless and soon they will be worthless.

@jamest.5001

4 жыл бұрын

We ran one like this for 20 years, only put a few drops of oil in the intake a couple times, I'd say it's still going.

@bsagreg

4 жыл бұрын

@@jamest.5001 Good to know I am thinking about running one one my work van my only question is on the rpm on an electric motor compared to v8 idled up as well as the difference in run 2 compressors compared to 1

@junso142

4 жыл бұрын

@@jamest.5001 hi how often do you need to add oil? Wont it accumulate in the tank? Thanks.

@jamest.5001

4 жыл бұрын

@@junso142 I wouldn't worry with a little oil in the tank, the tank accumulates water, and needs draining every day or so, if used alot, we used vacuume pump oil. And occasionally used a bit of non detergent engine oil. You just need separate inputs and outputs to the tank, to help keep oil and water out of the output hose, and a small water separator on the output, or you could use a water separator. Pre-tank, and post-tank, the pre tank will keep oil out of the tank, and idle speed will pump kinda fast, there is a pressure safety switch that may need bypassing, depending on how you plan to activate the clutch, I would either use a racing/ aircraft style covered toggle switch , with light , with a relay at the compressor, something as simple as a 2" pipe can be the tank, I once built one from a window airconditioner, and used a few pieces of 1" iron pipe as a tank, it could be mounted along the frame under a vehicle, 2-4 pieces about 1' - 2' long would hold a bit of air, if it's a long bed truck, maybe 6' long 2" or larger pipe, can hold a bit of air, and can be tapped at both or either end for output. A small oil resivor with a small tube going in the intake side, so it will add a drop occasionally when its running only, so it will slowly suck the occasional drip in. Along with a water separator, it could work kinda well for what it is! I'm thinking about building another larger gas powered one my self, maybe use 3-4 compressors, to hopefully runa sandblaster, they need loads of cfm! But I'd build it just as I described, have a small resivor, with a small tube in the intake of the compressor, to the bottom of a sealed container if oil, with a small 1/8" or so valve allowing the air to seep in and restricted as needed. To get the drip, needed, it's not like a car engine, it doesn't need alot of oil, it's more like a door hinge, as in the oil required, but set the intake air to the oil container, with it running, so it will drip like an IV, but the water separator will catch the extra, hope I helped, any questions are welcomed,

@junso142

4 жыл бұрын

@@jamest.5001 wow! This is great help and very useful info. The draining completely slipped my mind. Really appreciate this james.

This was the beginning of it all

A great build from one of my favourite KZreadrs, but the real challenge is; how to keep the swatch plate lubricated and prevent the aluminium bores from seizing or chewing out quickly.

@masparjo7084

2 жыл бұрын

Shut install separator on discharge line, clean air go to tank and oil back to inlet compressors

Playlist for all videos: kzread.info/dash/bejne/qpaBzK6Rj5rVlpc.html

И не одного комента на русском! Ну ладно буду первым! Этому компрессору придет мохнатая очень быстро! Без масла он не выгребет !

@user-px9yb6cu9u

4 жыл бұрын

от чего компрессоры ?

@soroka871

4 жыл бұрын

@@user-px9yb6cu9u автомобильный кондиционер

@K0TEL0K

4 жыл бұрын

сколько смотрю этот канал, русских коментов почти не когда не встречал.А по делу, само собой эти компресорам быстро придёт кердык, НО как я понял на это канле делают ради того чтобы делать=)

ทำดีมากๆๆๆครับ

Galing ng channel na to paps!! Husay talaga ng Pinoy! shoutout from Seattle 🤘

@letslearnsomething30

4 жыл бұрын

Salamat bro :)

@wendellp.4993

3 жыл бұрын

Galing nga neto boss..thumbs up..naiisip ko na din to kase ndi mahal din bago...

Interesting, but how do u oil the compressors?

Probably need some kind of oil injector,or mist for intake,and a dryer for discharge on compressors.

@alexvarvaressos8949

3 жыл бұрын

absolutly, the liquid that flow in the AC is lubricating the AC compressor. this setup is set to fail

Having many holes you cover them, then you make a new one hahahha

You can make aircondisnor for hone using car aircon compresser and motor

Buena idea el trabajo maestro pero cuando ya se keden sin lubricacion los conpresores se pegaran xq yo q sepa esos conpresores se lubrican x medio del gas refrigerante....

Why cut a hole in the tank when. You have plenty of threaded holes ready for fittings?

@letslearnsomething30

4 жыл бұрын

Hard to find a same fitting bro

@G40s_WW

4 жыл бұрын

The threads on the pressure tanks are often M22x1.5 so need an adapter to 1/2"

@Greywolf-Fx

2 жыл бұрын

Was wondering as well

Kolego jedna uwaga lepiej używać pakuł do uszczelniania gwintu taśma teflonowa z czasem puszcza powietrze poza tym projekt świetny pozdrawiam

Nice work :) Only thing I would change is the belt cover. It has right now no function

@letslearnsomething30

4 жыл бұрын

Thanks bro :)

MUY BUENO👍👍👍🇦🇷

Mad Scientist!!

I think all the people that are criticizing and leaving nasty comments are just haters thanks for taking the time and sharing this information with everybody you learn something new everyday that would be my comment and I should be everybody else's so miss you ain't got nothing nice to say move on and don't leave a comment stop hating and leave a thumbs-up

@TacticalHardlinePro

4 жыл бұрын

Robert Fisk it’s a great idea in theory but no oil for the compressors is a recipe for disaster, and those welds will CERTAINLY break and that steel tank will send shrapnel at the speed of sound in every direction and kill anything in a 20 foot radius without giving any warning before doing so. This is a dangerous way to save $300 at Home Depot.

How to build a bomb 101 👌

this guy is very talented

You need a larger pulley on your motor. Those air compressors can spin 2000 rpms no problem

@doddgarger6806

4 жыл бұрын

More, 5000 at least

@fabianojones4253

2 жыл бұрын

So wot are U saying? IT NEEDS a Bigger Motor.. like a higher capacity motor..?? Seeing that it's a 1.5Kw..

@wrathe7398

2 жыл бұрын

@@fabianojones4253 no. Use the same motor. Just change the pulley size on the motor. It changes the gear ratio to spin the compressor faster and building air pressure much faster. Do a Google search for pulley size tool and type in your sizes of pulleys to get the desired rpm. It works great. Plus you will be much happier with the compressor

I made one like this but had problem with oil coming out of the discharge ports could it ne to much oil

Next, turn and air compressor pump into an ac compressor 😁

@letslearnsomething30

4 жыл бұрын

:) bro one of my next project bro is i will turn fridge compressor into running engine

@dieselgeezer18

4 жыл бұрын

@@letslearnsomething30 ha i think your english needs some work. Awesome videos though ;)

@sergio154lexxanet

3 жыл бұрын

Esse tipo de compressor trabalha com óleo, nao vai durar muito, assim.

My hero!

Question, how do oil the compressors?

You are an upcoming version of Make It Extreme!! Good job!!

I saw a really cool air compressor made using refrigerator compressors it built up pressure in an instant and to top it off it was quite. 🤔🤔😊

I literally JUST thought of this, and you already have a video on it! lol, GET OUT OF MY HEAD! But I was thinking of using Superchargers off a small car.

@Omegadoomship

3 жыл бұрын

They do make a compressor like that. It is called a rotary screw compressor. Mostly used in industrial settings like factories and machine shops where air is being used continuously, unlike a piston compressor which is usually used more intermittently such as in an auto shop.

Exelente trabajo amigo saludos desde México

@letslearnsomething30

4 жыл бұрын

Thank you bro :)

@albertoledezma5790

4 жыл бұрын

Barbero!!!

I bet this compressor is a lot quieter than one you could buy at the hardware store. And if one of those compressors fails, another one can be had at a junkyard, instead of replacing the entire machine. The only thing I'd add, is a drain plug in the bottom of the tank. Compressing air will cause water to condense in the bottom of the tank, and you don't want it to start rusting on the inside!

@noorulhaque9027

4 ай бұрын

could this be usable for spary painting

Nice job

Mas kalau car aircon kompresorny kurang mengeluarkan tekanan angin itu masalahny pada apany yaa TRIMAKASIH 😊😊😊

Молодец, только как смазывать трущиеся поверхности компрессоров?

Very good (Brasil)

Genial bro de cuantos galones es tu tanque y puede cargar 120 psi tu par de cabezales se tardaria 10 minutos ?

Very good 👍

Whats that thing he screwed or clamped on while welding the v-belt on to the housing? he kept re-positioning it each time before welding. Thank you for any info on that contraption

@Ian_S

4 жыл бұрын

sleeper31204 It is a welding magnet that can be turned on or off. He made it in a previous video. You can search “Magswitch” and you’ll find a similar tool.

Nice done mate. You should use a larger diameter pulley on the motor. Read a lot comments about " the bomb you made" bellow in the comments, written from the sissies of internet... The sissies trust more the Chinese made compressors they buy, from the compressors made by themselves.

couldn't you use a decicant air dryer on intakes and put a small amount of oil like 2 quarts of compressor oil in the air tank and run a line from the bottom of the tank with a regulator to intake to keep it oilesld

how long it will take for the air to be full of 0 bar until it goes off?