This seal kit available on Amazon amzn.to/3ViLtQh

I have the same tractor which I am currently restoring. When I removed the steering wheel 8 years ago I had to use a puller, heat, and an air hammer and after that the seals started to leak and was noticeably harder to steer. I bought the A&I kit but just now got around to installing it but there is no fluid in the system to pop the old seal out. The A&I kit did not come with instructions so thanks for the video. I ended up removing the hand pump. I decided to rebuild the pump as I was not sure if the needle bearings were damaged. The pump is pretty simple design. I disassembled the pump and cleaned all the seal surfaces will 400 grit emery so not to affect the pump clearances. The only surfaces that need to be cleaned are the ones for the main seal (384373R1). The needle thrust washer and shaft needle bearing were worn so I am replacing them. Thrust bearing is F19633 and shaft bearing is A30588. The Case shaft seal kit is 535122R91.

@mowerdog

5 ай бұрын

Great job!

This video really helped me, particularly referring to the part #s. Also added a wheel puller to my tool supplies!

@mowerdog

Жыл бұрын

Great! I hope you got your seal replaced. Thanks for the comment!

I have the same tractor with the same issue. I was blading my driveway today and the leaking got so bad I decided to fix it and found your video. I even got the part number from your video and ordered on Amazon. Thanks a lot for the video.

@mowerdog

5 жыл бұрын

I'm glad you found my video! Yeah I was blading my driveway too and "bang" it happened. What a coincidence!!

@mowerdog

5 жыл бұрын

Did your seal come in?

@budove58

5 жыл бұрын

@@mowerdog Hey there. Yes my seal came in and I got the new seal in the steering column last night. The only difference was, the brass/bronze spacer would not fit all the way down the steering shaft. But the existing spacer was similar in size and was metal but came in two pieces so I just cleaned them up and reused them.

@mowerdog

5 жыл бұрын

Did your seal pop out like mine did?

@budove58

5 жыл бұрын

@@mowerdog Yeah, it sure did. I just had to get some pressure built up and it popped out the same way.

This video is the exact same setup my 1979 Massey Ferguson 245 diesel has. Thanks for the detailed video!

@mowerdog

Жыл бұрын

That's great.Thanks for watching

Thanks for the video mower dog, can see that this is a easy straightforward job! Your video was what I needed to see to know how to stop that leak.

@mowerdog

3 жыл бұрын

Go for it!

Helpful like a pro… thx for vid. Great help!

@mowerdog

9 ай бұрын

Thank you for watching!!

Thank you for this video, had to do the same fix my International 464. Great job!

@mowerdog

3 жыл бұрын

Thanks for the comment!

Thanks for posting this! Just followed this while replacing the seal on a Massey Ferguson 245, worked great! Part number was HG500007 for the seal kit. Came with a few extra seals that I didn't need.

@mowerdog

3 жыл бұрын

Great job Nathan!

@chriscox6598

3 жыл бұрын

I will be replacing the seals on my MF245 this week Thanks for sharing this how to.

@chriscox6598

3 жыл бұрын

Just finished. The MF245 was the exactly the same steps. Thanks!!!!

@lonniefrench553

Жыл бұрын

I would like to it on line

@lonniefrench553

Жыл бұрын

Send me the link how to order this kit

Huh, twenty some years of beating on farm machinery for a living and I never once thought of using the bag a seal came in as a protector. That will be a handy trick someday when I don't have the items I normally use for that with me.

@mowerdog

6 жыл бұрын

My Dad always said "A poor man has poor ways" So in this case it's what I had at the time. I usually use food wrap if the seals come in a box...... Thanks for watching my video!!

thanks for sharing! Helped me a lot with my case 580

@mowerdog

2 жыл бұрын

Glad it helped!

Good job and very good instructions.

@mowerdog

6 жыл бұрын

Thanks for the nice comment!

Great video keep up the good work

@mowerdog

6 жыл бұрын

Thanks!! I'll put up a new repair video as soon as something else breaks!!! LOL.....

Excellent video thanks for posting

@mowerdog

3 жыл бұрын

Glad you enjoyed it

Nice job. well done.

@mowerdog

6 жыл бұрын

Thanks so much!

Thank you!

@mowerdog

Ай бұрын

Thanks for watching. I hope it helped you

Great work! I have a 656 gas with the same issue. My issue is I think someone before me welded the nut that hold the steering wheel on, or at least that's how it looks. I have not put the impact on it yet, but the edges of the nut look welded to the inside of the column. Any suggestions out there:) Thanks Kevin Morrow old International lover

@mowerdog

3 жыл бұрын

If it's welded take a grinder and grind the top of the nut and shaft off about 1/8 inch deep. Then try the impact on it. Good luck and post back.

Love seeing that Farmall. You know "Real friends don't let friends drive green tractors." LOL

@mowerdog

6 жыл бұрын

LOL. I've always had Farmall/IH tractors. I had a C, 450 and for the past 20 years this 544 Hydro.

@benniecompton336

4 жыл бұрын

GREAT VIDEO!!!!!!

what is the seal kit for a 656 international farmall ? It does not show up anywhere it looks like this one. Even the dealer does not know about it.

@mowerdog

2 жыл бұрын

This is where I get all my IH?Farmall parts. They will send it to you. They know their shit. www.lafayettecountytruckandtractor.com/

can you tell me how you got the steering wheel off

@mowerdog

4 жыл бұрын

I backed the nut off until it was flush with the shaft. The I took a 1-1/4 diameter punch and while prying up on the wheel I hit the punch that was on top of the shaft and nut. Or you can try a puller....

@1harrymac

4 жыл бұрын

@@mowerdog thank you mine is soaking in penetrating oil as we seeak

How do I order this kit

@mowerdog

Жыл бұрын

amzn.to/3ViLtQh

Can you make a vid showing how you removed the steering wheel? Mine is seized up..

@mowerdog

5 ай бұрын

I sold the tractor

next time use vice grips and you can see the seal

@iveyq3843

3 жыл бұрын

Jim, need to do this myself, what do you mean about the vise grips? Use them instead of putting the wheel back on to test it out?

@mowerdog

2 жыл бұрын

Did you ever get your seal replaced?