Tools used in this video BLACK+DECKER Magnetic Screwdriver Set: amzn.to/3HnQIYM Edward Tools Pro-Grip Needle Nose Pliers 6”: amzn.to/39jhDZg

Thank you for the video, I was struggling at this and got it done quickly after watching. Fixed my horn!

@dudewecanfixit

9 күн бұрын

Awesome, great job!

This needs way more likes than this this is the best one I've seen so far thanks man

@dudewecanfixit

2 жыл бұрын

I appreciate the comment, please subscribe to our channel for future videos.

Thank you! I watched two other videos that showed four holes that were used to release four pins for air bag removal, which is what my Haynes and Chiltons show. Glad I found your video for the correct info. Liked and subscribed.

@dudewecanfixit

5 күн бұрын

Glad you got it!

You nailed it! Other videos said twist the screw driver, which didn’t work. Thanks

@dudewecanfixit

5 күн бұрын

Nice, glad you got it!

Praying for you Dillon!!!! You've been fighting for weeks you got this!!!

@dudewecanfixit

2 жыл бұрын

Thanks!

Thank you so much for this video I could not figure out how to remove the airbag on my 04 blazer and after watching this video I had it changed in a few minutes much appreciated

@dudewecanfixit

2 жыл бұрын

I'm glad you were able to do it successfully!

Thank u brother for this video,very helpful

@dudewecanfixit

Жыл бұрын

Happy we were able to help!

Dude that was very helpful I did hit the sub button I work on my own stuff and been turning a wrench form the age of 8 and some stuff I don't know and turn to utube thanks bro

@dudewecanfixit

5 күн бұрын

Thanks for the sub!

Thank you sir for the information no one never explained it fix my horn

@dudewecanfixit

2 жыл бұрын

we appreciate the feed back!

Appreciate video , helped me remove airbag on 2000 suburban

@dudewecanfixit

2 жыл бұрын

Hey, I’m glad it helped!

I am fan of your channel brother .

@dudewecanfixit

2 жыл бұрын

Thanks, I appreciate it. Please subscribe to my channel

Thanks for taking the time to explain the intricacies of that spring/clip/thing on the airbag. Other vids just say "ok cram this or that effin thing in there" and I bout mangled mine before I found your C L E A R (!!!) explanation.

@dudewecanfixit

Жыл бұрын

I'm so glad that it was helpful! Please subscribe so you can stay up to date on our latest videos!

Great job

@dudewecanfixit

2 жыл бұрын

Thank you!

Where can I get an open air wiring harness, like the one in this video, going from the fuse box to under the hood by way of the door jam. I've been looking everywhere!!! ;) Thanks for the video

Yes!

Great video! I have a 2009 suburban and need to remove my airbag to replace the 2 plastic pieces on each side. The small holes you talked about, do I just press inwards to release the airbag or bend?

@dudewecanfixit

2 жыл бұрын

I think you press straight in, please update me if I am incorrect

@StefanBergman

2 жыл бұрын

Yeah i pressed right in, had to feel around for the right spot though.

@dudewecanfixit

2 жыл бұрын

That's great!

Need to put back together,96 dodge dakota v-8 the sterring colume back together.

Thank gaaaaawd I found this. Was about to get a bigger hammer

@dudewecanfixit

7 ай бұрын

Lol, I'm glad you found this too!!!

You just saved me from throwing the whole truck away 😅

@dudewecanfixit

9 ай бұрын

Oh wow! Glad we could help!

Hey man! When removing the airbags is their supposed to be a “sensor” controlling the bags? Like an airbag module?

@dudewecanfixit

Жыл бұрын

There are impact detectors on the car's bumpers

unhh you the MAN '' LIKE IT'

@dudewecanfixit

Жыл бұрын

No no no. YOU the man! Thank you for watching 😁

Great video! Other videos say you should disconnect the battery when disconnecting airbags. You are the first video to show by removing the airbag fuse it will not deploy the airbag correct? Just trying to figure out which way is safer. Still great detailed video!

@dudewecanfixit

Жыл бұрын

It doesn't hurt to disconnect the battery. If you want to be as safe as possible, I would definitely recommend it.

@thezambranos2973

Жыл бұрын

@@dudewecanfixit sounds good! I appreciate the advice.

I have tried and tried to get the retainer to release. No matter how much I try.(even with a little smaller flat head). It seems the connector is corroded or something. I have even used a mirror and light to make sure I was doing it properly. still no luck. Any suggestions would be greatly appreciated.

@dudewecanfixit

Жыл бұрын

You may need to bring it to a shop, this should be a simple procedure. If it won't release, maybe a new set of eyes will help

@bradwilson5552

Жыл бұрын

Same here What a stupid idiotic Gdamn design 🙄

My 98 Chevy S10 has 4 tabs in the back of my steering column. I have popped each one and the airbag won’t budge. What am I doing wrong?

@dudewecanfixit

9 күн бұрын

I'm not familiar with that style unfortunately

I can’t get the airbag to go back in. It’s lined up but doesn’t pop in easily like all the videos? Any advice

@dudewecanfixit

6 ай бұрын

Did you remove anything other than the airbag?

Your sierra or sierra

@dudewecanfixit

5 ай бұрын

??

How about a 2003 Chevrolet Venture

@dudewecanfixit

5 күн бұрын

I have never worked on one of those

The 👍👍✌️

@dudewecanfixit

Жыл бұрын

Thanks!

So when I take my airbag out and off the horn or plastic cover I can put the plastic cover back without the airbag? The 4x4 I drive does not have a working clockspring nor do they make them anymore hence the reason to lose what will not work on my4x4.

@dudewecanfixit

2 жыл бұрын

I'm not sure exactly what you're asking, but why are you trying to remove the airbag?

@brucewmclaughlin9072

2 жыл бұрын

@@dudewecanfixit Well if you can not use the air bag anymore because the part that makes it work is no longer in production I figured one of these days to get a different steering wheel and the airbag removed before.

@dudewecanfixit

2 жыл бұрын

So, you are trying to remove the airbag from the horn cover?

@brucewmclaughlin9072

2 жыл бұрын

@@dudewecanfixit yes then replace the plastic cover till such time as I get another steering wheel. Rather not have a pit in the middle of the steering wheel with airbag and plastic missing ,just for aesthetic reasons.

@dudewecanfixit

2 жыл бұрын

I still don't understand why you are concerned with removing it. Even if it doesn't work, it's not big, heavy, or visible. That being said, I don't see why you couldn't remove it and install the plastic cover without it in place. Might even make for an interesting storage compartment

This is the second video I've seen showing this and I cannot get it to work for anything. Starting to really hate this vehicle

@dudewecanfixit

Жыл бұрын

What particular problem are you having while trying to get it to work?

How do I permanently remove the air bag, without it blowing up in my face,

@dudewecanfixit

Жыл бұрын

I don’t think we are at liberty to give you that kind of advice 😂 Our apologies