How to Punch a Hole in Your Belt
Mark Rippetoe demonstrates how to punch a hole in your lifting belt.
Get Coaching: startingstrength.com/coaching
Starting Strength Gyms: www.startingstrengthgyms.com
Find an affiliate: startingstrength.com/gyms/aff...
Become a Starting Strength Coach: startingstrength.com/careers
Starting Strength Online Coaching: startingstrengthonlinecoachin...
Пікірлер: 64
_The first thing you ought to do is ask yourself: What is the definition of punching? Answer: It's the production of holes against an external belt. Then, position yourself so as to have your weight on the punch, securing it; and then use a sharp blow of the hammer to DRAHVE it through._
It sure does help! Since I’ve lost weight, my current belt is now too big, and now I know what to do. Thank you.
Rip I find my 9mm glock works great for larger pronged belts. My 22 revolver works great on smaller belts.
@stark_outdoors
3 жыл бұрын
Of course for your audience I’ll say not to do it with the belt on.
@Fogyt121
3 жыл бұрын
@@stark_outdoors it would eliminate comments from the haters, so good thing you added that
@dard4642
3 жыл бұрын
@@stark_outdoors at very least, don't do it in the gym.
@fsmoura
3 жыл бұрын
>Of course for your audience I’ll say not to do it with the belt on joke's on you, they don't allow us to have guns here in prison
@paroblynn
3 жыл бұрын
@@stark_outdoors did you learn that when you injured yourself?
Where do I buy a "tubasix"?
@dard4642
3 жыл бұрын
They're between the tuba4s and tuba8s.
@fsmoura
3 жыл бұрын
aisle FAHVE in the hardware store
Bigger belt holes are more useful in general than smaller belt holes
I'm so glad you made this video. The hole punch I bought at Staples really was not cutting it.
@aba192
3 жыл бұрын
lmao nice pun pal 10/10 would read again
I never thought rip would make this video. I figured his answer would be you need to gain weight. Start drinking a gallon of milk a day.
@fsmoura
3 жыл бұрын
If you're needing to put extra holes in the belt, you're probably not drinking your milk like you should!
@sonofwotan
3 жыл бұрын
Did you watch to the end? He punched it on the long side to make it longer, not to make it shorter. So the trainee in question must be drinking plenty of milk.
Put them holes in sets of fivah.
@gojira444
3 жыл бұрын
wow so funny and original never heard that one before
Got an ATX 13mm that fits perfectly on the very skinny side of the belt, but i am planning on losing a little weight so ill be following your advice to a tee when the time comes. Thank you so much.
Thanks, ordered the punch today. Hopefully this works equally well on a dominion strength double ply belt.
Coach is such an optimist! I always add a new hole at the front of the belt!...:)
Can you do this for 1/2 inch hole spacing like trying to make a poineer cut belt?
very good advices
Let me save you all ten minutes. "Get a hole punch, hit it with a hammer" Done!
@reavesmo8060
3 жыл бұрын
Point taken but for a lot of folks a quality belt is a good sized investment, a day's pay for many. And tbh I'm the type that would use the first nail or knife I could find and be surprised that it ruins the belt. I like these videos.
I always use a heated nail it works fine
Do you burnish the holes at all? Or put anything on them?
Only rip could educate and sound dirty at the same time 😅😂😂😂. That’s what she said
I used my drill ...took about a second..but a hole punch works..lol
@keithlilly6242
7 ай бұрын
This does work well too.
Any thoughts on the SBD belt?
@ammarabdulwasie1513
9 ай бұрын
What did you do since I’m facing the same problem, I’ve lost weight so my belt doesn’t fit anymore. What did you do
I’m practically in between a medium and a large belt, should I buy a larger belt and drive more holes in to make it smaller?
@TommyBoy8771
2 жыл бұрын
Larger belt
Is it a pin or a prong? Prong sounds girthier.
Rip, do you still recommend Best Belts too?
@hoarbaby
2 жыл бұрын
I do.. have had mine almost a decade and it’s a soldier
I learned something here. Thanks
Prime point is "don't fuck it up" ~L~
pretty straight forward. but Rip, i just drunk a mozzarella and found this weird white ball inside the packing, any ideas what to do with that? thanks for helpful advice.
So.......Rip.......How do YOU get the plug of leather out of the punch?
@pbp6741
3 жыл бұрын
While this question seems to be directed at only Mr Rippetoe for anyone else with the same question: The punch has a cutout on the side above the cutting surface. Successive plugs push their predecessors upward until they fall out of the cutout. It’s not a big deal because the punch widens as plugs get pushed up the cutting surface resulting in reduced friction as they climb.
Rip, is that belt vegan?
@bobbobson4030
3 жыл бұрын
It doesn't eat any meat so I guess, yes
@fsmoura
3 жыл бұрын
the cow was certified vegan ✔
7:06 true
I've got a piece of tuba six here
7:06 That's what she said.
One could use measuring tape to align the hole.
@7:07 } "I'd rather have it a little too big than a little too small." - That's what she said...
Just use a garden rake its all the same
Why don’t the belts just come with a ton of holes
@keithlilly6242
7 ай бұрын
Man this is actually genius. Or at least make fewer sizes. I’m right between an xl and large and I don’t get why I’m having to punch more holes when they can make them with more holes.
Put me in comments from the haters
@fsmoura
3 жыл бұрын
it's not just like that, you have a bar to clear* with your comment * the bar is very low
@adriandreamwalker1027
3 жыл бұрын
@@fsmoura * but not too much if not it'll roll down your back
Gh
Aren't lever belts easier to put on and also better? Lol more expensive right enough
I thought you were in Texas.? Pull the belt snug and go around it with duct tape a few times.
Drill.
That belt is garbage! Inzer forever baby!!!
Rip is so unfit that after tapping the punch several times he is loudly puffing and huffing (you can hear it). I think he should get of his high horse and do cardio.