I haven't gotten to doing my Firman generators yet but I stumbled on to your video in the past and your instructions are so clear and concise that I can confidently do this myself. Thank you so much.

@JCTFIXIT

Жыл бұрын

Glad you found it useful. Let me know how it goes.

@boblem5994

Жыл бұрын

@@JCTFIXIT Well. I finally did my two generaters after years of procrastination and when I felt I had recovered enough from my surgery I turned to your video and did the play by play. I have to say I sure wish I had a smooth experience like yours. The first one I had a bit of a challenge putting on the rubber air intake hose onto the filter box. I hope it's in good enough. Anyway, the second one earned me about forty minutes of swearing. The metal backing clip that the bolt that goes into the filter box was misaligned and I had to do a lot of wrangling in aligning the bolt so the nut on that clip would finally take the threads and I finally get the bolt to seat and drive it snug. Whew! The filter and the filter cover was a quick fix and, Voila! I'm still not a small engine mechanic. Lol. Once again, your instructions were spot on and I have have some experience now in doing this by myself. The real test comes when I buy prime gas and test for any leaks. Got my fingers crossed and wish me luck.

@JCTFIXIT

Жыл бұрын

Good Job!

Thank you for the info! Good to know 🤙🏽

@JCTFIXIT

3 жыл бұрын

Thanks for watching! Glad I could help!

Nice video. I have the next size up Firman and so far have only run it on propane. Sea level to about 10K in elevation without changing the jet. It's always started right up and worked fine. I wonder if the jet change applies to running on propane also? Does anyone know? Being a 2 stroke motorcycle junkie I am too familiar with carb jet tuning on the gas engines.

@JCTFIXIT

Жыл бұрын

I would imagine that the jetting is not nearly as sensitive on propane as it is on gas

Great video! Thanks for sharing. I also live at a about 4,500 feet and mostly camp in the mountains at 8,000+- . Curious to know your long-term thoughts on this generator and how it has worked at elevation.

@JCTFIXIT

Жыл бұрын

Thanks! After a couple years of usage I have to say it has been pretty much flawless for me. My only advice is to set it on a piece of wood or a tarp or something hard if you take it camping just because the air intake is on the bottom and you don't want to be sucking up straight dirt.

Nice video! Your video has been the only video that even covers the carburetor for this particular model. Is this also how you remove and clean the carburetor as you normally would? I'm not installing anything new, but I notice after having/using this generator for a year it recently dies down when a load is running and many say it's because of a clogged carburetor.

@alleycat1387

2 жыл бұрын

Please answer as soon as you see this. Can I clean the carburetor without removing it or would I still have to take the carburetor out in order to clean it? The manual doesnt talk about how to clean the carburetor for this model and there's no video on youtube that does either.

@JCTFIXIT

2 жыл бұрын

Pull the jets out and soak them in carb cleaner.

@JCTFIXIT

2 жыл бұрын

You should not need to pull the whole carb apart

@JCTFIXIT

2 жыл бұрын

Also, in your small engines, always run ethanol-free fuel. The ethanol is usually what causes problems. Most stations fuel has 10% ethanol. You don't want this.

@alleycat1387

2 жыл бұрын

@@JCTFIXIT Thank you so much! Also great to know about the ethanol free fuel especially 😊

Great vid! How long after you registered did they send you the kit?

@JCTFIXIT

3 жыл бұрын

Thanks! Once your generator is registered you can call in and ask for the kit and they will send it to you for free.

@swift1500

3 жыл бұрын

@@JCTFIXIT Ordered it this AM. Firman Shipped already - fedex air to Canada, I should have it Tuesday. I’m impressed. Good customer service 👍🏻

Greetings from Australia mate. Did you notice the main jet size?. They have a number on the side. I have the same generator and it is always running lean. I wonder if the previous owner changed the main jet. Mine says 70 on the side.

@JCTFIXIT

2 жыл бұрын

I don't have it handy, but if you call firman, their customer support is pretty good. They should be able to tell you. Good luck.

Do I need to drain the entire gas tank?

@JCTFIXIT

4 ай бұрын

No. When you turn the fuel petcock to the off position, it blocks the flow of fuel from the tank. If you can turn the fuel peacock to the off position while running and let it run until it dies on its own and the carb would empty itself while running. But then you have to wait for it to cool down. 😎

THAT ARE THE WORST GENERATORS THAT I SEE..

@JCTFIXIT

2 жыл бұрын

This be the werst gramm-er I done seed.

@freeradical6390

Жыл бұрын

@@JCTFIXIT Isa secondeded that