This works on all Kenwood radios with the lt. greenware off the back.
Жүктеу.....
Пікірлер: 231
@cbstewart-fineart2 жыл бұрын
Worked like a charm on a Kenwood ddx276bt. Wish I would have done this years ago! Thank you!
@The8BitHero5 жыл бұрын
Just commenting to say this worked on my DDX9705S
@Jordanmav2 жыл бұрын
Thanks!!! Your video was very helpful! It worked on a kenwood DMX120BT installed in nissan pathfinder r51 in Greece!!!
@Mitketnok3 жыл бұрын
Awesome channel. Worked on a DDX396 Excellon
@stateofdade6 жыл бұрын
Fantastic! Thanks for the simple instructions.
@m.o85643 жыл бұрын
Worked on my dmx125bt. thank you!
@tralent2 жыл бұрын
I have a Kenwood DMX7706S and I can confim this works 100%. Initially I used an actual bypass from Amazon and didn't work. After bypassing that it's working perfectly thanks to this video 😊 great job guys 👍🏻👍🏻
@troylollysaf9311
Жыл бұрын
Whats purpose for bypass? Im new to radio installation
@tralent
Жыл бұрын
@@troylollysaf9311 to get around the safety features and allow full functionality of the head unit, regardless of speed or parking brake position.
@Oliver-ft2fq4 жыл бұрын
Great video. Just what I needed.
@tg302611 ай бұрын
You guys are awesome 100 percent. Thanks 😊
@JoseRodriguez-vg2sl3 жыл бұрын
You da man ive been going crazy trying to figure this out lol
@Guicho_Chapin5024 жыл бұрын
Thanks a lot guys for your help. 🙏🙏
@iscont Жыл бұрын
Excelente video, conciso y breve, pero funcional al 100%, sin necesidad de cables, relés ni conexiones adicionales. Saludos desde Caracas, Venezuela.
@COBBADAMS11 ай бұрын
Worked on my DMX7709S thx!
@Hugo-Hernandez5 жыл бұрын
Thank you so much this help me big time
@sixteenthsupply64536 жыл бұрын
Worked perfectly thanks!
@antoniohopson15 жыл бұрын
Outstanding Video!!
@nahmannothanks4 жыл бұрын
Works on flawlessly on a DMX7706S. Thanks guys.
@4_Nik_8
11 ай бұрын
Thanks same stereo.
@FolHunter5 жыл бұрын
Thank you. it worked!
@2nsane20057 жыл бұрын
works on JVC and Clarion decks as well!
@derekfrimodig5620Ай бұрын
Worked on JVC kw-m180BT thanks!
@Rickles6 жыл бұрын
Didn't realize I'd need this just to initialize android auto on my ddx9704s. I just wrapped it all up and I can't get started. What a disappointment that I have to tear it open again. This video saved me a few hours of tearing up my car if this works on the newest model.
@FiveStarCarStereoInc
6 жыл бұрын
+Rick yes it works
@Maverick9233
5 жыл бұрын
Did you need to ground the wire? Does your dvd work?
@PenfoldIV3 жыл бұрын
Perfect simplest tutorial out there, worked for my JVC M560bt 👌🏼👌🏼
@RETARDEDFATTKIDROBOT
2 жыл бұрын
I have the JVC 350BT pretty sure this is going to work on it too
@apdfreaky
2 жыл бұрын
Nice ! Which bolt did you use to connect it to the chassis of the stereo and will android auto also works now ? Pls let me know !!
@PenfoldIV
2 жыл бұрын
@@apdfreaky literally any screw on the back that's not obviously going to cause a problem. Can put it straight back in, andriod auto works all the time. Use responsibly 😉👍🏼
@xasperations4 жыл бұрын
Be careful that the screw doesn't drop into the stereo (like mine did). Took quite a bit of dismantling to find it again. My mistake was doing it form above with the stereo on my lap as it was still partially connected to the car.
@TwennyGeee
3 жыл бұрын
Lol you are awesome that you shared that.
@ojregnier5 ай бұрын
Love you for this ❤
@nickgallant5195 жыл бұрын
What makes this work? Is this like grounding it to the unit vs connecting it to the park so it has to be engaged? Awesome that it’s so easy, Id just like a little more understanding why. Thanks!
@cvbluegrasspatriot91578 ай бұрын
Great video!
@Atrickz.3 жыл бұрын
THanks so much now my video via USB is playing LOL
@Atrickz.
3 жыл бұрын
Worked on DDX4021
@kenyee885 жыл бұрын
Does this work with the Kenwood DMX905S?
@IMP3TIGO3 жыл бұрын
I've known about the general technique of grounding the parking sensor wire but it's too clever to ground that to the radio chassis. Always thought you needed to ground it to the vehicle ground but apparently not.
@seanlacroix
3 жыл бұрын
The new alpine stereos won't work. You need a bypass module or actually hook it up to the parking brake.
@ChicosTunes11 ай бұрын
Brilliant ....saved my sanity after 2 hours of effing about
@vog097 жыл бұрын
So I have a DDX794, mounted in a 96 corvette with a metra harness 70-1857. I did not clip the end of my lt green wire, but fed the end into the ring terminal crimped (kinda, it didnt squash down flat, but the connection did not pull apart with 5-10 lbs of force, first time crimping), then attatched to the screw that is above the antenna input (you have a screw there too). It is not working. Is it probably not a good connection/crimp due to not cutting the tip off? I dont want to undo everything multiple times if I need to wait on getting an extra relay or something. THanks
@MofaClubWarburg7 жыл бұрын
Many thanks from Germany
@MofaClubWarburg
7 жыл бұрын
works on DMX100BT
@FiveStarCarStereoInc
7 жыл бұрын
+DasToteF hi there!
@de4ek Жыл бұрын
I recently installed a KENWOOD ddx9907xr using a KEN1 and T harness, and RR2, in my 2013 civic w/o nav. I think I should be able to find the Light Green wire and the Black wire, and connect the two right there on the KEN1 to accomplish a brake bypass, but I want to make sure before doing it. What do you think?
@todizzle6662 жыл бұрын
What about on the newer DMX706s? Is this a same thing or same way to do this?
@Rileynd172 жыл бұрын
Can I use any screw on the rear of my kenwood? The back of mine looks different from this one.
@alexayala67204 жыл бұрын
It worked 👍🏼
@kevin23skater2 жыл бұрын
Do you do this so you can use the av-in to mirror your phone?
@seaco73794 жыл бұрын
Wow Thanks a million
@TH4TB4ST4RD5 жыл бұрын
Thanks! 👍👍
@ronnydisalvo802 жыл бұрын
Will this work on the dnx693s?as it is in the harness not directly off the unit?
@clautamiralves7123 жыл бұрын
Amazing thanks
@LordPrometheous3 жыл бұрын
I rigged a switch for my Kenwood DMX6706S because I haven't done an install in 15 years, and I wasn't sure if the new head unit would look to see if the wire is permanently grounded and disable video. Either way, it doesn't work when I'm moving, which was my other concern--maybe some internal accelerometer knows I'm tryna fool the head unit, so my DVDs and video files on USB give me a black screen or the big red Ghost Buster symbol. It worked fine while I was in my garage testing it out. As soon as I left for an 800 mile trip, it was 12.5 hours of pure disappointment.
@sumdood2035 Жыл бұрын
so basically any screw on the back should work? They are all grounded to the chassis? I ask because I ordered a newer model kenwood.
@Beth-El Жыл бұрын
Thanks so much
@derrickhuffman77765 жыл бұрын
Will this work on the ddx959 with idatalink?
@tabletteninch5006 жыл бұрын
Does this work with the DDX9704S?
@jboslim2 ай бұрын
Thanks ,will this work on Kenwood dmx1057xr as well?
@OGcottoncandyrandy4 жыл бұрын
Would this work on the DDX8906S?
@MasterDJRenn6 жыл бұрын
i tried this with my Kenwood DNS573s and it didn't work, it says unable to read disk with a DVD but plays music CD fine. I grounded it to the car where the power ground for the radio is attached, do you HAVE to ground to the radio itself? I don't see what difference it would make though.
@gabee4497
6 жыл бұрын
1 NYC DJ it sounds like your CD reader lens is dirty or worn out, might wanna clean it using only a Qtip and water no alcohol
@tommyrox Жыл бұрын
I grounded my new Kenwood Excelon DMX957XR to the chassis but doesn't seem to be bypassed. Does it have to be grounded at the radio?
@scottgrafelman23904 жыл бұрын
Wish I would have seen this before I tore my dash apart to get to the parking brake switch wires!
@duane29333
3 жыл бұрын
Does that work also
@jrlezama108610 ай бұрын
Ty this actually worked I can see the image 🎉 how do you mirror iPhone?
@robertosaenz73085 жыл бұрын
Does this work with the 9903s ?
@seangowan74412 ай бұрын
Will this work on 03-06 Silverado/Sierra Bose/non Bose/swc/non-swc/OnStar/ no OnStar, and all Kenwood radios?
@jeffsmith2062 жыл бұрын
Do you still do this with iDatalink KIT-FTR1?
@John-wt6nf4 жыл бұрын
Will this work with a JVC stereo?
@kevinleague6 жыл бұрын
I did this and the DVD player plays while driving now, Thanks! However, now, when my parking brake is engaged, my Satellite Radio looses reception!?! Any other tips on which screw to attach the bypass too? My unit is a kenwood ddx374bt
@POOKIE5592
3 жыл бұрын
@big bee What if you have a stick shift?
@Mcintyrecd7 ай бұрын
Will this work with a ddx57r Kenwood head unit?
@desmondmooreart6 жыл бұрын
Thank you
@Can354 жыл бұрын
WORKS for DMX7018BTS
@fubbster25833 жыл бұрын
Will this bypass on the ddx918ws ?
@Qsmtt3 күн бұрын
does this work with the kenwood dmx 8021 dabs ?
@carbonoxx5 жыл бұрын
does this work on dmx-905s?
@watts39ful7 жыл бұрын
do you prefer kenwood or pioneer
@anirudhpanwar6202 Жыл бұрын
will this work for a JVC car media player also...KWM150BT
@newfie-dean58032 жыл бұрын
Great simple instructions to the point! Any idea if this works on newer Sony’s too? I read that it does but I read that for some brands you have to use a switch to bypass the parking brake.
@liltrayhomie2k
Жыл бұрын
I recommend doing it this way
@flbchbm
Жыл бұрын
no expert here, but newer head units are looking at the status when first turned on and then a timed amount later and compares. If it's the same, no-go. If it sees the ground, then later sees it not grounded, GO.
@BadBoy31Roy3 жыл бұрын
I just had a Kenwood DMX9707S installed at Bestbuy on Saturday....I couldn't get screen mirroring to work and it said parking off....When I pulled the radio out I cut and did what they did in this video....Thing is It was crimped together with a different color of green wire that I think comes from the steering wheel controls....I just taped that one and it did not work....Anyone know what to do ???? Radio now says there is any error in the wiring....Thank you
@TyzRydz3 ай бұрын
Can it be grounded to any proper area in the vehicle?
@robbmillett96002 жыл бұрын
Will this work with JVC KW-M56BT??
@braxtonernst993811 ай бұрын
Can you bypass the parking brake wire on a boss car stereo
@iskav6 жыл бұрын
Parking brake Bypass is needed for KENWOOD DNX893S dvd/navigation system?
@FiveStarCarStereoInc
6 жыл бұрын
+Suren Iska yes, ground lt green wire
@michaelc.63066 ай бұрын
Is this the same for Sony Ax5600?
@MikeJordanUnCamplicated7 жыл бұрын
I just bought a Kenwood ddx9903s. The lt green wire is part of the main wiring plug, not connected directly to the radio. I bought the Maestro RR and the GM5+ idatalink connections for my Silvarado. I also bought a little PCB brake bypass. I soldered everything together today, but I have not pluged anything up. The brake bypass has 3 wires, blue, black and lt green. I soldered the brake by pass black and blue to the corresponding radio and Idatalink wires. The directions on the bypass say not to hook it to the truck brake wire, so I only soldered the lt green to the kenwood wire. I left the lt green on the idatalink wire for the truck unconnected. Does that sound right? You wouldn't happen to have a splainer vid for this would you?
@12vinstall
7 жыл бұрын
Mike Jordan solder your light green straight to the ground wire in your radio harness will work perfectly fine
@MikeJordanUnCamplicated
7 жыл бұрын
As indicated above, I have already done something substantially different. As I interpret the directions it appears right. Looking for feedback on what I have already done
@FiveStarCarStereoInc
7 жыл бұрын
Mike Jordan yes you did it all right. You did not need the bypass but that is ok it will work the same. You will have no problems. Enjoy
@MikeJordanUnCamplicated
7 жыл бұрын
I saw this vid posted literally right after I finished soldering everything up. I was only a few hours, one way or the other, of seeing the easy way you did it. I appreciate the follow up. THANKS!
@FiveStarCarStereoInc
7 жыл бұрын
Mike Jordan you bet enjoy
@frankc14302 жыл бұрын
Will the backup camera still work with this modification?
@thaaalegend2775
3 ай бұрын
Everything work
@warren50336 жыл бұрын
So I just purchased the ddx9704s which doesn't have the green wire. Is this receiver still able to be bypassed?
@tpaparazzoify
6 жыл бұрын
curious I just purchased same..the prk sw wire is part of the wire harness.. were u able to add the terminal and ground?
@tpaparazzoify6 жыл бұрын
just got the DMX7704S . No PRK SW wire coming out back and is part of wiring harness.. Can I do this same trick..add a terminal and ground somewhere? or connect to ground wire in harness? Thanks
@cebollero69able
5 жыл бұрын
Were you able to figure it out
@mgoblue0970
5 жыл бұрын
The point is, if you don't have the PARK SW and it's a part of the harness, you don't need to bypass. This fix is for people who do have the wire and it's not part of the harness as we cannot do things like run Android Auto without it grounded.
@josearrvizo3594 жыл бұрын
This to get mirror link while driving right
@harshman773 жыл бұрын
I am preparing to install a DDX9907XR and a Maestro RR. I understand looping the wire from the HU to the HU chassis, but what should I do with the wire from the Maestro? Just leave it disconnected or should that be grounded as well?
@DatHondaBoi223
3 жыл бұрын
Did you figure this outv
@harshman77
3 жыл бұрын
@@DatHondaBoi223 yes I did. You can just cap off the wire from the Maestro.
@DatHondaBoi223
3 жыл бұрын
@@harshman77 my radio wont come on I was up until 2 at I’m just giving ip
@isrealperez906910 ай бұрын
What's the purpose of a bypass I'm going to subscribe to you cuz I need questions on the Kenwood My backing looks like that I like to know about the reverse camera where would I supply the power from on a BMW 328i 2010 model
@thomasballis6783 жыл бұрын
Is this still relevant on the newer stereos I mean mine is a late 2019 stereo I think
@thomasballis678
3 жыл бұрын
I have the excelon 906s so assuming it would work then. I was hoping i could get away with just a software update
@youngjizzle1800 Жыл бұрын
My radio cuts off every time I hit my brakes does this have anything to do with it
@reddemon527 жыл бұрын
my kenwood dnx 572 bh does not have those wires in the back green and purple please help..
@FiveStarCarStereoInc
7 жыл бұрын
+Robledo,D you may need a second little white plug.
@lunchbox6966a6 жыл бұрын
DNX574S parking brake bypass... the unit does not have a light green wire coming out of it. do i ground the light green wire coming from the wiring harness?
@EmilyMTaylor
5 жыл бұрын
Hey Bud - Did you ever figure it out? I'm in your same boat.
@mjyumping
5 жыл бұрын
@@EmilyMTaylor New Kenwood units have the parking switch wires and reverse wires with the secondary, kenwood-specific harness.
@d775430207 жыл бұрын
these companies all understand everyone pretty much bypasses the whole break thing but in your opinion what makes Pioneer try harder while everybody else uses a simple ground to the chassis and it works but with Pioneer in some cases you have to go through a bunch of crap do they care about safety just that much or they just like to make things difficult
@jasonjoncich96045 жыл бұрын
work on Kenwood DNX996XR? says it needs to be hooked up for some menu options in the ad
@AceBoy2099
4 жыл бұрын
I too would like to find out if this bypass still works on these now '19 models, Mines the ddx9906xr (No-Nav)
@E99584
4 жыл бұрын
@@AceBoy2099 I will try with mine tomorrow. have the same kenwood in my 18 camry as you
@FadedAK47
4 жыл бұрын
@@E99584 Did it work?
@jessejames5825
2 жыл бұрын
@@FadedAK47 guess it didn't work.
@stevebills224 жыл бұрын
I needed to do this to make andriod auto work
@PaulC39
4 жыл бұрын
I have a Moto Z4 Play and I have it connected via bluetooth with my new Kenwood Excelon DDX 396 DVD player double din unit. How does Android Auto work?
@pkt1213
3 жыл бұрын
That's why I am here too. I cannot set up screen mirroring or android auto without the parking brake signal. Seriously?
@PaulC39
3 жыл бұрын
@@pkt1213 I went back to the Car Audio place I had it installed and they bypassed the green parking break sw wire so I can play dvds while driving or parked.
@jaydonpham25125 жыл бұрын
hi guy. can i ask what this for?
@suneagle996 жыл бұрын
I’m having Best Buy install my radio for me. Do I tell them to do this or will they already do it?
@fattymagu
6 жыл бұрын
russell suneagle they told me they wouldn’t do it or install the microbypass wiring kit you can get off amazon for me. I was thinking I would do it myself and then give it to them do do the regular install but who knows. Reason for Best Buy is for the free installation.
@fattymagu
6 жыл бұрын
russell suneagle let me know how it goes.
@kylereece3647
5 жыл бұрын
they will not install a bypassed harness, it's against the law and best buy would be liable. if u give them a bypassed harness they will undo it and install it correctly. if they do it and get caught they get fired most won't take the risk
@CrowBarActual3 жыл бұрын
Anyone know if this works on the newer DMX957XR?
@rocman9137
Жыл бұрын
does it work?
@southpark6456 жыл бұрын
I just bought a kenwood DDX375BT and planning on doing install myself, Is this bypass so that the video player will still play movies while the car is moving?
@brutalbasspro
5 жыл бұрын
Did it work for you? I have a ddx595 on the way wondering if I should get the bypass chip if this doesn't work.
@southpark645
5 жыл бұрын
Marcus Todd I actually ended up having to return this model and going with a pioneer cause this kenwood model didn’t fit my car even with the kit I bought. But I will say, on my pioneer I can watch movies with the car moving but I ended up paying the guy I had install the deck an extra $15 for the bypass cord. Best of luck to you man!
@mgoblue0970
5 жыл бұрын
@@southpark645 Why do you need to watch movies while driving. How about, oh, I don't know, driving while actually driving?!
@southpark645
5 жыл бұрын
mgoblue0970 why Do you have to worry about what I’m doing? I travel from Phoenix to my Hometown a lot and often times, my younger sister or my younger brother wants to go, so it’s for them to be able to watch a movie on the way and that’s the actual truth lol
@davidr11224 жыл бұрын
All you need to do is ground it out!!!!! WOW! Will this work on my DMX9706S I just ordered?
@TACOBR3ATH1
3 жыл бұрын
Hey bro did this end up working ? I ordered the same double din as yours
@jamesdaugherty33926 жыл бұрын
Can anyone verify this will work on the Kenwood DDX 6904S as well before I button this dash up??
@jonpg28 Жыл бұрын
I have the kenwood dmx709s can I ise this method to bypass it
@beenreal7149
Жыл бұрын
Did it work for this unit?
@JayKay-mw2tl Жыл бұрын
Will this trick work on the Kenwood Excelon DMX709S?
@thomastipton8120
10 ай бұрын
Did you try it? Just curious if it worked.
@wolfsmane
10 ай бұрын
@@thomastipton8120 worked on my DMX709S
@Rye_Greeny963 жыл бұрын
Does this work on the DMX8019dab
@Crysekon
2 жыл бұрын
Just worked on mine :)
@DigitalEssenceDesign
2 жыл бұрын
@@Crysekon Just fitted my DMX8019DAB today and went to adjust the revesing guidelines and it said I had to be parked. Will be doing this trick tomorrow morning.
@dennisstilb1218Ай бұрын
Did this now just says no signal instesd of not accessible
@AZGUNS904 ай бұрын
What if we dont have a ring terminal on hand?
@thaaalegend2775
3 ай бұрын
Buy one or just strip the wire and put it under the screw 😭 ring terminals are rlly cheap tho
@doomedhuh2 жыл бұрын
i had mine installed already and im scared to take it out
Пікірлер: 231
Worked like a charm on a Kenwood ddx276bt. Wish I would have done this years ago! Thank you!
Just commenting to say this worked on my DDX9705S
Thanks!!! Your video was very helpful! It worked on a kenwood DMX120BT installed in nissan pathfinder r51 in Greece!!!
Awesome channel. Worked on a DDX396 Excellon
Fantastic! Thanks for the simple instructions.
Worked on my dmx125bt. thank you!
I have a Kenwood DMX7706S and I can confim this works 100%. Initially I used an actual bypass from Amazon and didn't work. After bypassing that it's working perfectly thanks to this video 😊 great job guys 👍🏻👍🏻
@troylollysaf9311
Жыл бұрын
Whats purpose for bypass? Im new to radio installation
@tralent
Жыл бұрын
@@troylollysaf9311 to get around the safety features and allow full functionality of the head unit, regardless of speed or parking brake position.
Great video. Just what I needed.
You guys are awesome 100 percent. Thanks 😊
You da man ive been going crazy trying to figure this out lol
Thanks a lot guys for your help. 🙏🙏
Excelente video, conciso y breve, pero funcional al 100%, sin necesidad de cables, relés ni conexiones adicionales. Saludos desde Caracas, Venezuela.
Worked on my DMX7709S thx!
Thank you so much this help me big time
Worked perfectly thanks!
Outstanding Video!!
Works on flawlessly on a DMX7706S. Thanks guys.
@4_Nik_8
11 ай бұрын
Thanks same stereo.
Thank you. it worked!
works on JVC and Clarion decks as well!
Worked on JVC kw-m180BT thanks!
Didn't realize I'd need this just to initialize android auto on my ddx9704s. I just wrapped it all up and I can't get started. What a disappointment that I have to tear it open again. This video saved me a few hours of tearing up my car if this works on the newest model.
@FiveStarCarStereoInc
6 жыл бұрын
+Rick yes it works
@Maverick9233
5 жыл бұрын
Did you need to ground the wire? Does your dvd work?
Perfect simplest tutorial out there, worked for my JVC M560bt 👌🏼👌🏼
@RETARDEDFATTKIDROBOT
2 жыл бұрын
I have the JVC 350BT pretty sure this is going to work on it too
@apdfreaky
2 жыл бұрын
Nice ! Which bolt did you use to connect it to the chassis of the stereo and will android auto also works now ? Pls let me know !!
@PenfoldIV
2 жыл бұрын
@@apdfreaky literally any screw on the back that's not obviously going to cause a problem. Can put it straight back in, andriod auto works all the time. Use responsibly 😉👍🏼
Be careful that the screw doesn't drop into the stereo (like mine did). Took quite a bit of dismantling to find it again. My mistake was doing it form above with the stereo on my lap as it was still partially connected to the car.
@TwennyGeee
3 жыл бұрын
Lol you are awesome that you shared that.
Love you for this ❤
What makes this work? Is this like grounding it to the unit vs connecting it to the park so it has to be engaged? Awesome that it’s so easy, Id just like a little more understanding why. Thanks!
Great video!
THanks so much now my video via USB is playing LOL
@Atrickz.
3 жыл бұрын
Worked on DDX4021
Does this work with the Kenwood DMX905S?
I've known about the general technique of grounding the parking sensor wire but it's too clever to ground that to the radio chassis. Always thought you needed to ground it to the vehicle ground but apparently not.
@seanlacroix
3 жыл бұрын
The new alpine stereos won't work. You need a bypass module or actually hook it up to the parking brake.
Brilliant ....saved my sanity after 2 hours of effing about
So I have a DDX794, mounted in a 96 corvette with a metra harness 70-1857. I did not clip the end of my lt green wire, but fed the end into the ring terminal crimped (kinda, it didnt squash down flat, but the connection did not pull apart with 5-10 lbs of force, first time crimping), then attatched to the screw that is above the antenna input (you have a screw there too). It is not working. Is it probably not a good connection/crimp due to not cutting the tip off? I dont want to undo everything multiple times if I need to wait on getting an extra relay or something. THanks
Many thanks from Germany
@MofaClubWarburg
7 жыл бұрын
works on DMX100BT
@FiveStarCarStereoInc
7 жыл бұрын
+DasToteF hi there!
I recently installed a KENWOOD ddx9907xr using a KEN1 and T harness, and RR2, in my 2013 civic w/o nav. I think I should be able to find the Light Green wire and the Black wire, and connect the two right there on the KEN1 to accomplish a brake bypass, but I want to make sure before doing it. What do you think?
What about on the newer DMX706s? Is this a same thing or same way to do this?
Can I use any screw on the rear of my kenwood? The back of mine looks different from this one.
It worked 👍🏼
Do you do this so you can use the av-in to mirror your phone?
Wow Thanks a million
Thanks! 👍👍
Will this work on the dnx693s?as it is in the harness not directly off the unit?
Amazing thanks
I rigged a switch for my Kenwood DMX6706S because I haven't done an install in 15 years, and I wasn't sure if the new head unit would look to see if the wire is permanently grounded and disable video. Either way, it doesn't work when I'm moving, which was my other concern--maybe some internal accelerometer knows I'm tryna fool the head unit, so my DVDs and video files on USB give me a black screen or the big red Ghost Buster symbol. It worked fine while I was in my garage testing it out. As soon as I left for an 800 mile trip, it was 12.5 hours of pure disappointment.
so basically any screw on the back should work? They are all grounded to the chassis? I ask because I ordered a newer model kenwood.
Thanks so much
Will this work on the ddx959 with idatalink?
Does this work with the DDX9704S?
Thanks ,will this work on Kenwood dmx1057xr as well?
Would this work on the DDX8906S?
i tried this with my Kenwood DNS573s and it didn't work, it says unable to read disk with a DVD but plays music CD fine. I grounded it to the car where the power ground for the radio is attached, do you HAVE to ground to the radio itself? I don't see what difference it would make though.
@gabee4497
6 жыл бұрын
1 NYC DJ it sounds like your CD reader lens is dirty or worn out, might wanna clean it using only a Qtip and water no alcohol
I grounded my new Kenwood Excelon DMX957XR to the chassis but doesn't seem to be bypassed. Does it have to be grounded at the radio?
Wish I would have seen this before I tore my dash apart to get to the parking brake switch wires!
@duane29333
3 жыл бұрын
Does that work also
Ty this actually worked I can see the image 🎉 how do you mirror iPhone?
Does this work with the 9903s ?
Will this work on 03-06 Silverado/Sierra Bose/non Bose/swc/non-swc/OnStar/ no OnStar, and all Kenwood radios?
Do you still do this with iDatalink KIT-FTR1?
Will this work with a JVC stereo?
I did this and the DVD player plays while driving now, Thanks! However, now, when my parking brake is engaged, my Satellite Radio looses reception!?! Any other tips on which screw to attach the bypass too? My unit is a kenwood ddx374bt
@POOKIE5592
3 жыл бұрын
@big bee What if you have a stick shift?
Will this work with a ddx57r Kenwood head unit?
Thank you
WORKS for DMX7018BTS
Will this bypass on the ddx918ws ?
does this work with the kenwood dmx 8021 dabs ?
does this work on dmx-905s?
do you prefer kenwood or pioneer
will this work for a JVC car media player also...KWM150BT
Great simple instructions to the point! Any idea if this works on newer Sony’s too? I read that it does but I read that for some brands you have to use a switch to bypass the parking brake.
@liltrayhomie2k
Жыл бұрын
I recommend doing it this way
@flbchbm
Жыл бұрын
no expert here, but newer head units are looking at the status when first turned on and then a timed amount later and compares. If it's the same, no-go. If it sees the ground, then later sees it not grounded, GO.
I just had a Kenwood DMX9707S installed at Bestbuy on Saturday....I couldn't get screen mirroring to work and it said parking off....When I pulled the radio out I cut and did what they did in this video....Thing is It was crimped together with a different color of green wire that I think comes from the steering wheel controls....I just taped that one and it did not work....Anyone know what to do ???? Radio now says there is any error in the wiring....Thank you
Can it be grounded to any proper area in the vehicle?
Will this work with JVC KW-M56BT??
Can you bypass the parking brake wire on a boss car stereo
Parking brake Bypass is needed for KENWOOD DNX893S dvd/navigation system?
@FiveStarCarStereoInc
6 жыл бұрын
+Suren Iska yes, ground lt green wire
Is this the same for Sony Ax5600?
I just bought a Kenwood ddx9903s. The lt green wire is part of the main wiring plug, not connected directly to the radio. I bought the Maestro RR and the GM5+ idatalink connections for my Silvarado. I also bought a little PCB brake bypass. I soldered everything together today, but I have not pluged anything up. The brake bypass has 3 wires, blue, black and lt green. I soldered the brake by pass black and blue to the corresponding radio and Idatalink wires. The directions on the bypass say not to hook it to the truck brake wire, so I only soldered the lt green to the kenwood wire. I left the lt green on the idatalink wire for the truck unconnected. Does that sound right? You wouldn't happen to have a splainer vid for this would you?
@12vinstall
7 жыл бұрын
Mike Jordan solder your light green straight to the ground wire in your radio harness will work perfectly fine
@MikeJordanUnCamplicated
7 жыл бұрын
As indicated above, I have already done something substantially different. As I interpret the directions it appears right. Looking for feedback on what I have already done
@FiveStarCarStereoInc
7 жыл бұрын
Mike Jordan yes you did it all right. You did not need the bypass but that is ok it will work the same. You will have no problems. Enjoy
@MikeJordanUnCamplicated
7 жыл бұрын
I saw this vid posted literally right after I finished soldering everything up. I was only a few hours, one way or the other, of seeing the easy way you did it. I appreciate the follow up. THANKS!
@FiveStarCarStereoInc
7 жыл бұрын
Mike Jordan you bet enjoy
Will the backup camera still work with this modification?
@thaaalegend2775
3 ай бұрын
Everything work
So I just purchased the ddx9704s which doesn't have the green wire. Is this receiver still able to be bypassed?
@tpaparazzoify
6 жыл бұрын
curious I just purchased same..the prk sw wire is part of the wire harness.. were u able to add the terminal and ground?
just got the DMX7704S . No PRK SW wire coming out back and is part of wiring harness.. Can I do this same trick..add a terminal and ground somewhere? or connect to ground wire in harness? Thanks
@cebollero69able
5 жыл бұрын
Were you able to figure it out
@mgoblue0970
5 жыл бұрын
The point is, if you don't have the PARK SW and it's a part of the harness, you don't need to bypass. This fix is for people who do have the wire and it's not part of the harness as we cannot do things like run Android Auto without it grounded.
This to get mirror link while driving right
I am preparing to install a DDX9907XR and a Maestro RR. I understand looping the wire from the HU to the HU chassis, but what should I do with the wire from the Maestro? Just leave it disconnected or should that be grounded as well?
@DatHondaBoi223
3 жыл бұрын
Did you figure this outv
@harshman77
3 жыл бұрын
@@DatHondaBoi223 yes I did. You can just cap off the wire from the Maestro.
@DatHondaBoi223
3 жыл бұрын
@@harshman77 my radio wont come on I was up until 2 at I’m just giving ip
What's the purpose of a bypass I'm going to subscribe to you cuz I need questions on the Kenwood My backing looks like that I like to know about the reverse camera where would I supply the power from on a BMW 328i 2010 model
Is this still relevant on the newer stereos I mean mine is a late 2019 stereo I think
@thomasballis678
3 жыл бұрын
I have the excelon 906s so assuming it would work then. I was hoping i could get away with just a software update
My radio cuts off every time I hit my brakes does this have anything to do with it
my kenwood dnx 572 bh does not have those wires in the back green and purple please help..
@FiveStarCarStereoInc
7 жыл бұрын
+Robledo,D you may need a second little white plug.
DNX574S parking brake bypass... the unit does not have a light green wire coming out of it. do i ground the light green wire coming from the wiring harness?
@EmilyMTaylor
5 жыл бұрын
Hey Bud - Did you ever figure it out? I'm in your same boat.
@mjyumping
5 жыл бұрын
@@EmilyMTaylor New Kenwood units have the parking switch wires and reverse wires with the secondary, kenwood-specific harness.
these companies all understand everyone pretty much bypasses the whole break thing but in your opinion what makes Pioneer try harder while everybody else uses a simple ground to the chassis and it works but with Pioneer in some cases you have to go through a bunch of crap do they care about safety just that much or they just like to make things difficult
work on Kenwood DNX996XR? says it needs to be hooked up for some menu options in the ad
@AceBoy2099
4 жыл бұрын
I too would like to find out if this bypass still works on these now '19 models, Mines the ddx9906xr (No-Nav)
@E99584
4 жыл бұрын
@@AceBoy2099 I will try with mine tomorrow. have the same kenwood in my 18 camry as you
@FadedAK47
4 жыл бұрын
@@E99584 Did it work?
@jessejames5825
2 жыл бұрын
@@FadedAK47 guess it didn't work.
I needed to do this to make andriod auto work
@PaulC39
4 жыл бұрын
I have a Moto Z4 Play and I have it connected via bluetooth with my new Kenwood Excelon DDX 396 DVD player double din unit. How does Android Auto work?
@pkt1213
3 жыл бұрын
That's why I am here too. I cannot set up screen mirroring or android auto without the parking brake signal. Seriously?
@PaulC39
3 жыл бұрын
@@pkt1213 I went back to the Car Audio place I had it installed and they bypassed the green parking break sw wire so I can play dvds while driving or parked.
hi guy. can i ask what this for?
I’m having Best Buy install my radio for me. Do I tell them to do this or will they already do it?
@fattymagu
6 жыл бұрын
russell suneagle they told me they wouldn’t do it or install the microbypass wiring kit you can get off amazon for me. I was thinking I would do it myself and then give it to them do do the regular install but who knows. Reason for Best Buy is for the free installation.
@fattymagu
6 жыл бұрын
russell suneagle let me know how it goes.
@kylereece3647
5 жыл бұрын
they will not install a bypassed harness, it's against the law and best buy would be liable. if u give them a bypassed harness they will undo it and install it correctly. if they do it and get caught they get fired most won't take the risk
Anyone know if this works on the newer DMX957XR?
@rocman9137
Жыл бұрын
does it work?
I just bought a kenwood DDX375BT and planning on doing install myself, Is this bypass so that the video player will still play movies while the car is moving?
@brutalbasspro
5 жыл бұрын
Did it work for you? I have a ddx595 on the way wondering if I should get the bypass chip if this doesn't work.
@southpark645
5 жыл бұрын
Marcus Todd I actually ended up having to return this model and going with a pioneer cause this kenwood model didn’t fit my car even with the kit I bought. But I will say, on my pioneer I can watch movies with the car moving but I ended up paying the guy I had install the deck an extra $15 for the bypass cord. Best of luck to you man!
@mgoblue0970
5 жыл бұрын
@@southpark645 Why do you need to watch movies while driving. How about, oh, I don't know, driving while actually driving?!
@southpark645
5 жыл бұрын
mgoblue0970 why Do you have to worry about what I’m doing? I travel from Phoenix to my Hometown a lot and often times, my younger sister or my younger brother wants to go, so it’s for them to be able to watch a movie on the way and that’s the actual truth lol
All you need to do is ground it out!!!!! WOW! Will this work on my DMX9706S I just ordered?
@TACOBR3ATH1
3 жыл бұрын
Hey bro did this end up working ? I ordered the same double din as yours
Can anyone verify this will work on the Kenwood DDX 6904S as well before I button this dash up??
I have the kenwood dmx709s can I ise this method to bypass it
@beenreal7149
Жыл бұрын
Did it work for this unit?
Will this trick work on the Kenwood Excelon DMX709S?
@thomastipton8120
10 ай бұрын
Did you try it? Just curious if it worked.
@wolfsmane
10 ай бұрын
@@thomastipton8120 worked on my DMX709S
Does this work on the DMX8019dab
@Crysekon
2 жыл бұрын
Just worked on mine :)
@DigitalEssenceDesign
2 жыл бұрын
@@Crysekon Just fitted my DMX8019DAB today and went to adjust the revesing guidelines and it said I had to be parked. Will be doing this trick tomorrow morning.
Did this now just says no signal instesd of not accessible
What if we dont have a ring terminal on hand?
@thaaalegend2775
3 ай бұрын
Buy one or just strip the wire and put it under the screw 😭 ring terminals are rlly cheap tho
i had mine installed already and im scared to take it out
Hi this will also works on JVC unit?
Soooooo much easier than Pioneer
@FiveStarCarStereoInc
7 жыл бұрын
Bleach Dome yup,