How to bypass the parking brake for your radio (XAV-AX3250)
I thought I should make a video because it was a little unclear on how to do it. So I tried to make it a simple as possible… let me know if you have any questions.
I have the XAV-AX3250 but I think you can do this on almost any of the radios on the market beside the pioneer radios.
TikTok- garrett_huggies
*im not responsible if you break your radio in the process of doing this and don’t want the videos if you are driving… this is meant for if you have a passenger or you don’t want to put your parking brake down and watch the videos on it.
Пікірлер: 22
Thank you
You the man
I did this and my ac control stopped working right after. What would cause this? Is any electrical signal being sent from this wire to the head unit? I figured since it was a ground wire that it would have no electrical signal.
Does this affect the backup camera at all?
What for a Pin Number on Radio for the Parking Brake?
Can I just ground it to the black ground in the harness?
@RettTheRegret
Жыл бұрын
I would assume so… as long as its grounded.
@leeroy8160
Жыл бұрын
Has it held up fine?
@nastysoda9212
9 ай бұрын
yes, this kid should not be giving advice. Just twist it into the ground cable as you wire the harness.
WORK LIKE A CHARM TAPE IT UP ONLY PROBLEM I COULDNT FIX MY CAMERA LOL PRETTY SURE THEY WOULD CHARGE ME LIKE 200 TO FIX
How do you do this the the newer boss bcpa10 im installing in my boat and I dont have a e break and I can't find any info i can't even check out android auto while on my work bench please help anyone??????????
@Ghosted834
Жыл бұрын
Buy a brake micro bypass kit
@chronsblack4441
Жыл бұрын
@@Ghosted834 turns out for the bcpa10 just ground the wire and its good
@hudwa
Жыл бұрын
@@chronsblack4441 So same as the video, just taping the parking brake wire to the exposed metal body of the stereo will ground out the Boss bcpa10 and bypass the parking brake?
@shyannesaucier4150
7 ай бұрын
@@hudwadude I hve so much bass in my vehicle I hat tapping that shit to the casing would definitely come off why not just solder it to the ground in the harness
What is sxm
Ай бұрын
sirius xm. its for satellite radio in united states
Then your reverse camera won't work if you have one
@RettTheRegret
Жыл бұрын
Mine does, and if I want I can turn it on while I’m driving
@Lorangebeatrice
Жыл бұрын
@@RettTheRegret could you explain how you do that? I have the same Sony unit
@RettTheRegret
Жыл бұрын
@@Lorangebeatrice It’s been awhile since I did it now… but I’m pretty sure I hooked the backup camera to a constant power-source, so it can be on without the car being in reverse. After I hooked it up the the constant power I also connected the head unit to the reverse signal wire, that way the head unit knows when to automatically turn on the camera display for reverse. Hopefully this helps and if not let me know what is confusing so I can go into more detail.
@bull.dozier9271
Жыл бұрын
@@RettTheRegret You're correct, I spliced my hot wire into the main power wire using solder and heat-shrink for the radio and the negative I grounded to the frame. Then the "Reverse in" wire(should be purple with a white strip and be labeled it also will be a very long wire unless they trimmed it where you go it installed) has to be connected to the positive power source that turns on when you engage reverse...aka your reverse lights will work fine...I used a fuse tap from autozone to install mine to the fuse for my reverse lights...however if your car comes with a back up camera it might be easier for you or if its already installed and working only in reverse....then you will just have to connect the camera positive wire to the radios positive so it receives power constantly when the radio is turned on not just when the car is in reverse....sometimes people will install the cameras positive wire and the radios "Reverse in" wire to the same power source for reverse (reverse lights) that is what will cause it to be only on when in reverse.....hope all that made sense I feel like I mansplained a bit...