I've been looking at hidden blade desings for 5+ years now. This is the best one by far.

@redcubegamer7716

4 жыл бұрын

Me too bud

@TheDudeGuy0

4 жыл бұрын

Same

@Rockyb303

4 жыл бұрын

what does he do when the camera cashes tho

@Besecuit

4 жыл бұрын

Not really,checkout Rawice's channel

@zeitseele7109

4 жыл бұрын

kzread.info/dash/bejne/jIKi05OSZ7iaiMo.html how is this? I also have a better more slim one with medieval carves.

I reworked this entire model. I even made a pla part for the duel extended blade to lock (the part where the camera apparently crashed). I will upload it to thingiverse if there's enough people who are still interested in this design. It works amazingly well in fact it's one of my favorites

@SuperTommy117

3 жыл бұрын

Link?

@AntiKipKay

3 жыл бұрын

@@SuperTommy117 I'll upload them in a bit and give you a link. What printer do you have?

@SuperTommy117

3 жыл бұрын

@@AntiKipKay that would be awesome thank you!! And I have a cr10 s pro v2. Amazing printer in my opinion! :)

@AntiKipKay

3 жыл бұрын

@@SuperTommy117 ok here you go www.thingiverse.com/thing:4694383

@AntiKipKay

3 жыл бұрын

@@SuperTommy117 Also I only uploaded the files I worked on so you still need to download the rest from the original creator

You're the best bro, the brotherhood will always be by you.

Interesting design, very similar to the one that Shelden Caudill did, only without the ring. Looks pretty good :)

2:50 that piece at the left end is TOO THIN!

gracias por hacer esto gratis buen tutorial

I'm 3D printing it right now. I hope I can assemble it properly. Wish me luck.

@BIANCOBA

3 жыл бұрын

So, how did it go? I want to print this one too so i wanted to ask if you had any problems or something with this.

@baconpancakes8899

3 жыл бұрын

@@BIANCOBA Never fully assembled it becuase I couldn't find small rubber bands and the appropriate screws lol

@DEADMANPLAYS

3 жыл бұрын

@@baconpancakes8899 lmao 😂😂

@puppy3434

Жыл бұрын

@@baconpancakes8899 Try using loom bands

@SolaireAstora-bg6hf

Жыл бұрын

@@baconpancakes8899 The 'loom bands' should work they are very good for blades!

thank you for the file

Good work. Creality cr 10 is the best 3d printed quality for this project

@yoshiolsen6568

6 жыл бұрын

thank you!

Thanks man.

what does he do when the camera cashes ???????????????

Okay so I've been working on this for a week now, and I've had to modify a few things, and fix several parts that broke because they were too thin. A week later, I've still not been able to amass enough bands for the slide mechanism to work consistently after I've attached it to my arm. Also on that note, the hole, I suppose, for the string to slide through to attach to the ring provides a lot more friction than perhaps it should while trying to activate it via ringpull attached to the hand, HOWEVER, were I to pull it straight, rather than at an angle created by my wrist, it works _mostly_ fine. I say mostly because again, I've not figured out how many bands of the type I'm using (the only ones I've been able to find that fit without a lot of interference are elastic hair ties) will create the force needed to shunt the blade all the way out and back. So far I think I've got six in there, and Gravity is still the champion when it comes to both extension and retraction. My next idea would end up being Shirring Elastic, wrapped multiple times. I also believe that perhaps some of the segments should have been thicker than they are. Were it that they were made of metal there would be no strength issues, however, being plastic as they are, their integrity and ability to withstand some of the forces does worry me. I've already mentioned in another comment below about the Blade housing being thin enough to actually break from activation. I would also recommend thickening out the backplate, and adding more mass upfront where the string hole is, rather than just the block with the hole, to strengthen the entire area. I doubt many, if anyone, would really mind if the whole unit was much thicker if it meant a sturdier construction. I'll update this in the future when I've gotten the mechanism to work 100% of the time. I'm also wondering if some fishing wire would reduce the friction and the weird activation issue (currently using multiple strands of cotton thread). TL;DR: certain parts need to be thicker or need more plastic added to increase the rigidity and strength.

@yoshiolsen6568

5 жыл бұрын

First of all thank you so much for your detailed review/report so far! This helps a lot. I will try to improve the blade through your thoughts as soon as possible. -> I am still very busy at the moment but hopefully this will change in the next two month.

@furk4n05

3 жыл бұрын

@@yoshiolsen6568 are you still there

Great work! I would also like to know whether you came up with the idea for the thing with the rubber band on it that slides back and forth to control the whole blade or you saw it some where else.

Having some struggles assembling the blade as it isn't shown how the hinge works. Do you care to elaborate on that if you're still active?

Is that from shelden Caudill paper hidden blade prototype? I think it similar expecially the spring out and spring in triggerer part

You could try to make the button one activete from the flexing of the wrist muscle, like described in the game

@sushivision

4 жыл бұрын

That mechanism is almost impossible to design.

@AngelCruz-ow1lz

3 жыл бұрын

Imdeepainreborn did it, check his youtube channel

Hi! Could you upload a video demonstration of the alternate version as well, the one you use a string and a ring to open?

@UNeedDaBeef

3 жыл бұрын

You attach a string and ring to the mechanism bruh

Yo, this was sick and I been working on mine. After sanding some rough patches here and there, I got the thing work. The issues I kept running through was that the blade never really retract or appear all the way. It somehow alway goes to some area to the blade house or either the slider that seem to be tighter. I try sanding it away but I don't want to take off too much. It worse when I place the rest where I dry test them to see and we'll, it would work. Maybe it was the rubber band I used but even without the cover, i remained back at the root of the problem (I think) where it was tight in the middle, back.

I'm not sure why you made the slider in 2 parts to be glued together. Doesn't printing them in one piece makes the slider stronger? Other than that great video!

how do you make it activated through string pull

DOPE

My God this is driving the hell out of me from assembling it. You NEED to make the thin parts thicker and please please keep in mind, glue won't withstand the rubber band

Hey buddy ı want the ask something if ı PUT there a Ring and a rope it's can be automatic blade?

Is the ring mechanism working for this?

pls respond what size screws did you use i what to make this

Hi. Excellent job with your hidden blade it is pretty cool. I like the fact you did it extended. I know piggy jj already did but yours is better. Just a thing: how do you use it with a ring?

@DanLo

6 жыл бұрын

Officially there isn't a ring. It's a button version. But if you will attach the ring to the button, you will get a ring version.

@yoshiolsen6568

6 жыл бұрын

thank you! In the files you will find besides the middle-switch with a button, a middle-switch without a button and also a closed cover. At the front of this switch is a hole where you can attach a string (with a ring if you like :D). I hope this confusing explanation is answering your question. ;)

@josepedrosousa9725

6 жыл бұрын

Yoshi Olsen Just one more thing please: how big is the blade?

@josepedrosousa9725

6 жыл бұрын

Yoshi Olsen And one more, to use it with string, where should I attach the string, in the middle part/switch?

@yoshiolsen6568

6 жыл бұрын

200x35x15mm (without the holders at the side) 4:18 -> the hole is at the left side of the part (you can't see the hole in the video because of the perspective)

Hola muy buen diseño. Puede ser que la traba de la hoja que lleva un trozo de alambre lleve alguna gomita por dentro? Para que se trabe cuando la hoja se extiende

@mahuhatch2643

Жыл бұрын

nah bro

Hey, Yoshi I was just wondering were to attach string and ring to please! Love this design a lot thanks!

@mahuhatch2643

Жыл бұрын

LOL deez nuts

This design is awesome! but I have a couple questions about the blade pieces: When you put the blade together, how does the locking pin-piece automatically lock itself when the blade is not blocking it? Is there a rubber band, and if so, where? And it would be really helpful if you could show how to assemble it (only if you find time). Thanks!

@SliceyMcBreadmaker

5 жыл бұрын

Aye, I could really use this info aswell, just paid someone to print this out and I've no idea how it's supposed to spring in! EDIT!!: turns out, in that little slot behind the pin, you're supposed to superglue a section of rubber band as seen here: kzread.info/dash/bejne/iqeqrbqsh7yTetY.htmlm38s hope this helps you as much as it does me!

@yoshiolsen6568

5 жыл бұрын

that's it! I did it like it is shown in the video 'SliceyMcBreadmaker' linked. You will probably need many tries till it is working smoothly! @SliceyMcBreadmaker Thank you for the trust in my model! :D I hope you are not disappointed and it won't turn out to be a mistake. I remind you that it is just a prototype and may not work propely for you. If you have any further question please feel free to ask me! I will try to help you as much as I can. :)

@SliceyMcBreadmaker

5 жыл бұрын

@@yoshiolsen6568 Absolute banger of a model lad, I'm just waiting on elastic bands thin enough to power the blade slide, but after spending a day and a half easily filling the plastic down and making it all flow well, I'm ecstatic, honestly! kudos lad, your design is one of the best two-section blades I've seen!

@SliceyMcBreadmaker

5 жыл бұрын

I would, however, recommend that the second segment, the blade sleeve, be beefed up a little and the thickness of the main body to account for that, as I managed to tear through the actual sleeve by simply activating the mechanism.

how hard this is to make and what printer did you use

Parts list? ik its pretty simple but still, i wanna get it right

Nice video, could you maybe update it or make another one for the ring

@itrcks7575

3 жыл бұрын

This is the ring mechanism....

Hi, I'm having a lot of issues getting the blade to eject properly. I believe i've done something wrong with the slider mechanism, how many rubber bands does it take?

@yoshiolsen6568

5 жыл бұрын

it depends on the rubber bands (tension)^^ I use three/four of these small ones shown in the video. you have to try it out what or wich works best for you! ;) In another blade I use other rubber bands because the small ones didn`t work properly for it.... so it`s mostly trial and error

Which 3d software is best u ever used

How long did it actually take you bro ?

How do you get it to retract?

could you please post the part when the camera crashes

this is a double mechanism?

How do i attach the rope with the ring if i dont want it with button?

@allanrec9429

4 жыл бұрын

Make the buton a litle bit thin and the atach the string to the slider i gues

Does the blade lock?

How do I get this model

What is the nut size

What kind of/size rubber bands do you use? and how many do you use on the slider mechanism?

@yoshiolsen6568

5 жыл бұрын

I think they are called 'loom bands' . ->Low quallity but for testing things out they are great. 3-4 bands are used on the slider mechanism. All in all I recommend better rubber bands. I just used these because my brother had them laying around :D

@SolaireAstora-bg6hf

Жыл бұрын

@@yoshiolsen6568Thanks

The one part I can't figure out is the inner blade lock. Please help

@BIANCOBA

3 жыл бұрын

Hey i wanted to ask, does the external blade lock? I mean, the first part of the blade. I would like to know because i want to print this one too 😅

And the paper clip? My God, one micro meter out and the whole thing jams

I did everything as you did.. but still not working at all.. I don't know did I do wrong.. :/

what with string

Can you add a blade that is not extended to the files because I can't get the extended one to work and I think that just one blade is lot more stable and reliable, since the extended one feels flimsy and only part of it extends most of the time and I have to pull the blade, and also if you can't/don't have time to make the new blade, then can you give me the measurements to to the blade, the part in the middle that sinks in etc so I can design my own.

@yoshiolsen6568

5 жыл бұрын

Someone (and by that I mean Chase H. -> thanks man;) ) created a remix of the HB on Thingiverse. This should work! But for the future I plan also an extra version for it^^ Hopefully I will find the time for the whole projekt soon.....

@lazybobby2404

5 жыл бұрын

@@yoshiolsen6568 can You please give me the link to the files?

what is the thickness of the blade?

@yoshiolsen6568

5 жыл бұрын

the whole body is 15mm thick

How is your 3d printer printing so excellent smooth?

@yoshiolsen6568

6 жыл бұрын

I sanded all the parts before I recorded this video so that they fit perfectly. Or do you mean something else?

@DanLo

6 жыл бұрын

No, thats it, Thanks ;D

@makingtutorial9761

6 жыл бұрын

Creality cr 10

how to assamble middle_part_2?

@yoshiolsen6568

5 жыл бұрын

4:10 -> use some superglue for it

what did you do that the blocker springs back at 1:22 ? my one dont

@alexkarev2118

4 жыл бұрын

Did you find the exit in this problem? I dont know how to do it too.

@theGigander123

4 жыл бұрын

@@alexkarev2118 ye figured it out. just did a ruberband into the hole and glued it on

@Ares-vh9qz

2 жыл бұрын

@@theGigander123 i have the same problem, can you explain better please?

1:20 what did you do here explain?

Would this design technically work as a full metal version as well?

@gabrieleelia9471

8 ай бұрын

Yes

What filament did you use

@AB-lw6eb

3 жыл бұрын

PLA

please show what you did when the camera crashed

@megagamingteen

Жыл бұрын

I found out how and if i am not wrong the screws are 2 and half mm wide

What materials do we need?

@AB-lw6eb

3 жыл бұрын

PLA Filament

how can made assassin gun samelike this

Dude i just litterally freaking out to assermble the blade cover, because idk how to put back the little pice inside with only the printed thing, the missing part of the crashed camera is not understandable, pls someone can help me, i'm in struggle for two weeks, and re-printed the blade cover like 4 times

@furk4n05

3 жыл бұрын

i will try to help you

@matteofranciosa2207

3 жыл бұрын

@@furk4n05 i figured out how to do it, thanks anyway

@shacharbs8

3 жыл бұрын

@@matteofranciosa2207 can you explain?

@Emi4201

3 жыл бұрын

@@matteofranciosa2207 EXPLAIN

@Ares-vh9qz

2 жыл бұрын

@@furk4n05 how i can do it? i have the same problem

can you show me the design??????please!!!!!

@yoshiolsen6568

5 жыл бұрын

video description ;)

Could you explain why the extentions on the 2 blocking/pushing parts? Why no just stretch the rubber band e full length? I ask because i am having trouble getting mine to extend and retract with enough force. I understand the strength of the bands vary from person to person as well, so I'm hesitant to blame the design just yet.

@yoshiolsen6568

5 жыл бұрын

like you suggested you could use the full length of the main body to get the needed tension. for me it works better with the extensions^^ but be careful when you shorten them! the blocking/pushng parts may not slide accurate on their 'rail' when the extensions are to short. and I definitely have to say that this design is not perfect. It is just a prototype ;) so you are allowed to blame it :D

Or at the least subtitles

good idea, but kinda crap, i printed the whole thing and it didnt work. 2 days work for nothing

@yoshiolsen6568

5 жыл бұрын

I'm sorry that it didn't work out for you. Could you please give me some more information about your problem? Maybe I am able to help you! -> clearance? (loose fit? ...) -> to much friction? ... Every 3D-Printer performs differnet. So it mite not work for you but maybe it will work for others. With your help I could try to improve it so it will also work for you! ;)

@amatiasq

4 жыл бұрын

I'm pretty sure he spend more than 2 days working on this, probably weeks. Don't be surprised if you spend 2 days and it doesn't work.

How much to buy one pre assembled off you ?

@yoshiolsen6568

6 жыл бұрын

I still try to improve the blade, and so I would not sell it at this point. Maybe in the near future. I consider a price somewhere around 70€ but I am definitely not sure about that yet.

@amatiasq

4 жыл бұрын

@@yoshiolsen6568 My friend. I bet you can charge more than 100€ for a functional one ;)

this is too thin to even 3d print

@Green-The-Mafia

4 жыл бұрын

justin zhao wrong. You can print with ever 0.01mm layer heights with 3D printers. Get your facts straight.

horrible, how do you record a tutorial video and let your camera to crush and just continue without showing what was lost before?

My ass yes, the camera crashed rather said that it was a difficult stage and that you were too lazy to film it !! Pfff

@AB-lw6eb

3 жыл бұрын

😢😢😢😫 say to him We need you

Watch out this is a complete scam it doesnt work at all this shitbox needs the power times 500 to work it gets out about 2 cm