Use a flat edge screw driver and a hammer to lightly tap around the edge of a push knot. That will spread them hem open enough to free it up. Tap it with a hammer to close it once it’s off and reset it. That simple.

@ltb5882

3 жыл бұрын

I did exactly this. Worked like a charm. And I'm able to reuse the washer

@martinblnd

3 жыл бұрын

L TB, yeah it works pretty good.

After you get the washer and wheel off, drill a hole in the end of the axle and install a cotter pin. Much easier to change the next time.

Thanks! I finally got around to changing my hand truck’s wheels today using your process and it worked like a charm 😀

Great Video! Thanks for taking the time to share your solution,I appreciate it! I myself am putting the front wheels of a Toro 1638HXL lawn mower tractor that I found in the junkyard on my Handcart dolley to haul around Half ton capacity floor jacks.

Wow. Thank you. These things are a real pain.

Ever heard of a cotter pin? Thats what the hole is designed for. 1 min to install.

Thanks great good idea with the hinge pin!

Like you I don't like to throw things away. Got two dollys to replace their tires. One has holes n the other one doesn't

I used a Dremel with a cutting blade to remove the lock washer!

Yes I think a cotter pin would be easier to change

Amazon carries the lock washers and they have tubes for the tires too.

great way of moving equipment

That ring that is hard to remove is dangerous, it only works on the cart if you are moving light stuff and there is no strain on the wheels. My cart had lost it long time ago probably when I hauled washer and dryer. Dangerously without realizing I had lost that ring, I hauled my Yamaha amp. Thank to my lord, the wheel did not came off while hauling the amp. I solved my problem with double split clamping shaft collar.

Thanks for the video, exact same problem

Thanks, good solution. However, next time perhaps have someone hold your video camera so we can see how you solved your "nightmare".

@rocketrider1405

7 жыл бұрын

And move into the sunlight rather than filming in the shade. Thanks for a solution though !

@Ghostginthree

7 жыл бұрын

Haha I agree, sometimes I have no camera woman to help but I know what you mean. Thanks for watching

@Ghostginthree

7 жыл бұрын

Haha I know, did not realize how that affected the video but just wanted to post it just raw straight to the point but thanks for pointing that out. Glad you liked it and thanks for watching.

Thank you for the video. I too am having the same problem, however, it was frustrating trying to keep up with the image... Thanks though.

@Ghostginthree

5 жыл бұрын

I am not that great on video taping, working on it but glad the video helped.

Spend a little more and get worry free tires from hf. I've had mine for years. They're great.

@Ghostginthree

7 жыл бұрын

Thanks for the info. I figured it would be an easy fix compared to buying new tires but I agree, I will get some worry free tires. Thanks for watching and the info.

Piece of coat hanger wire works.

All you need is a hinge clip or hinge cap! Lowe's or Home depot

@Ghostginthree

3 жыл бұрын

Thanks for the info

Take a big hammer to the backside the wheel it will take off the ring and you should be able to reuse it

Let's see. I use hand trucks for moving around mostly boxes, stacks of stuff, small appliances, etc. Not so much ammo. #myloss

Sounds like a good use for Fix-A-Flat!!

@Ghostginthree

9 жыл бұрын

Roy Munson You know brother I did use that, glad you mentioned this. I should have said something about it on my video. I did use fix a flat and it did work but the tire would go flat after a month or so, over 3 times. So not worth buying can after can to keep it going. This worked better and overall but glad you reminded me of this. Thanks.

Harbor Freight carries those inner tubes for a few bucks each.

@Ghostginthree

7 жыл бұрын

Thanks. I thought so too and went there to look for them and they did not have them but will check again now that you told me. Thanks

Tractor supply carry them

I am unable to remove the cap on the wheel. You didn't show how to remove the cap.

No we can't see this haha

or put the dolly on the side and hammer the rims to push out the lock washer which is 5/8 of an inch

I hope u know how to record now after 8y, put the camera in the area that you want people to see, simple but u fail. I just use a nail instead of pin.

Next time u want to make a video how to change the tire in ur dolly u have to actually see what ur doing, sorry just my opinion

Really good info but really bad video shots

Believe it or not, it's called a "DOLLY". "Dolley" is a woman's name.

The washer looking fastener is called a bunch of different names: Push Nuts, Starlock, Star Washer, Speed Nuts, Push Ons, Push On Fixes. Unfortunately I still couldn't find the size I needed in stores.

@babaregi5934

Жыл бұрын

Amazon