I should’ve known it was that easy! Lol 😂 fought my own logic, and the inspiration of the Holy Spirit. Decided to check the University of KZread. Found your video. Thank you kind sir! Don’t know why I doubted God! 😢

@BarryTsGarage

Жыл бұрын

Excellent!

@stevemuldoon9451

5 ай бұрын

Amen and praises be!

@user-gq5vr7wc4r

Ай бұрын

Great u save my day❤

Thanks Barry, swapped my wheels in 10 minutes after watching this. Great idea with the socket to put the ring back on.

@sjparadiso

Жыл бұрын

YES!!! 10 minutes and done! So appreciate this video. KZread!!!

Thank you! After struggling on and off for days, I replaced two wheels in 10 minutes following your video. Didn't even need the WD-40!

@BarryTsGarage

2 жыл бұрын

Great! Thanks for letting me know

THANK YOU!! I am a 63 y/o woman and did this myself!

@BarryTsGarage

2 жыл бұрын

I knew you could! Very 👍 good! Thanks for your comment

A big thank you for this video! Less than 5 minutes to change the dry-rotted tires. Helluva lot cheaper than buying a whole new truck, too!

@BarryTsGarage

Ай бұрын

Great! Glad it helped!

Just finished adding my new tubeless tires to my hand truck. I will never have to deal with flat tires again. I knew to use a socket to reinstall the retaining ring, but using the vice (or vise) grips made the job easy. Thanks!

@BarryTsGarage

Ай бұрын

Glad to hear it!

This helped me tonight; I replaced the tires on mines, and while it took a little elbow grease along with the WD-40, it all worked out. Thank You for the video!

@BarryTsGarage

2 жыл бұрын

Great news! Thanks for your comment.

@laurannaroach2559

Жыл бұрын

Who knew you were posting the answer to my nightmare! Thank you!

I was able to wedge A small pry bar under the press ring and apply counter pressure to slowly pry it up and off. Thanks for the vid and inspiration to DIY

@BarryTsGarage

2 ай бұрын

Glad I could help!

Good. Alright. I'll go right out and give it a shot. I was just trying to get it off when I thought, maybe someone else has already dealt with this problem. That's funny. I just finished watching your video. I just got back from Harbor Freight where I bought the same exact wheels. I think they were $8.25 each or so. Thanks for your help.

@BarryTsGarage

8 ай бұрын

Great Jim, let me know how it goes for you!

@bexaminer1

8 ай бұрын

@@BarryTsGarage It went great Barry. Tomorrow I'll go to Lowe's and see if I can't find some 4" front casters for the hand truck. Then it will be like brand new. Thanks again.

Hi • I have worked in a grocery store for many years • we use a claw hammer or crowbar to pop off the push nut 🚂

@BarryTsGarage

9 ай бұрын

Great tip!

After reading the comments I see I am not alone in how to remove the retaining ring. Thanks for your video

@BarryTsGarage

8 ай бұрын

Glad it helped

Great video! Thank you for such a well done yet short video. Your tips about the WD-40 to get it off and using a socket to get it back saved me so much time and frustration!

@BarryTsGarage

Жыл бұрын

Fantastic I’m glad it helped!

I would have been very confused if I hadn't watched this video first, wasn't expecting that ring (and was heading out to do this in an area with very little light). On my way out the door I did a quick KZread search, watched your video and instead of a lot of frustration, it was a very quick job and the socket to reattach quickly was a great suggestion. (As was the WD40 and refilling the tires) Thank you!

@BarryTsGarage

Жыл бұрын

Thank James - glad it helped!

Thank you! Had already spent nearly 1 hr pulling old tire and tubes from existing rims. Went to Harbor Freight and they only had complete assemblies for $8 ea. this video helped a lot.

@BarryTsGarage

9 ай бұрын

Glad to hear it!

i just used one of those small blue ity bity baby crowbars 2wrk around either rim rings...came off just fine (& they where as rusted as u had show-n on urs)......& tnks 4 makin vid cuz i was bout 2take tha whole axle off...lol...

@BarryTsGarage

2 жыл бұрын

Very good! Glad it helped you out. Thanks

I have this exact handtruck. And exactly dthe same replacement wheelsThanks for the technique!. Found the retainer washer nuts on Amazon

@BarryTsGarage

2 ай бұрын

Glad it helped!

Worked like a champ after I tried doing it the wrong way

@BarryTsGarage

2 жыл бұрын

Awesome

After buying two solid tires & rims as a package online, I too don’t have to put air in the tires on my hand truck anymore ! 😃👍❤️🙏

This worked like a charm, thanks. Couldn’t figure out how to get that crimp washer thing off.

@BarryTsGarage

2 жыл бұрын

Get!

@BarryTsGarage

2 жыл бұрын

Great !

No wonder my wheel doesn't stay on, the washer is gone! Was about to throw it away but a new hand truck costs $100+. Thanks 4 the vid!

@BarryTsGarage

2 жыл бұрын

Great, glad to help

@acusolo

2 жыл бұрын

@@BarryTsGarage Actually, where can I find that washer with teeth? I couldn't find it on Home Depot or ebay. Thanks!

@BarryTsGarage

2 жыл бұрын

I can’t promise you but my first guess would be a hardware store like Ace or true value

Saved me a ton of time! THANKS!!!

@BarryTsGarage

2 ай бұрын

Fantastic

This really was the way! Thanks a lot. The pressed washer was also rusted on. Hitting it with WD-40 loosened it, and the vice grips warped the washer so that it broke its hold on the axle (I heard a crack as the rust separated) and I could reuse mine as well. I’m also going to harbor freight for the cheap wheels:-) thanks!

@BarryTsGarage

2 жыл бұрын

I’m glad it helped - good work!

Thank you so much! This worked perfectly (Channel Locks and 3-1 oil). New wheels..good to go. Thank you for taking the time to make this video!

@BarryTsGarage

10 ай бұрын

You are welcome!

The socket idea over the shaft to get that retaining washer (whatever its called) back on is a great idea. Thanks Barry.

@BarryTsGarage

Жыл бұрын

🙏🙏

I am about to do this for the first time. Wish me luck!

@BarryTsGarage

9 күн бұрын

Let me know how it goes

@heathermcd12

9 күн бұрын

@@BarryTsGarage I struggled and gave up, lol. Durn things beat me 1-0 today.

@BarryTsGarage

4 күн бұрын

Too bad. Oh well…

Great video! I just bought new wheels and tires for my dolly yesterday and I'm going to install them today. 👍👍

@BarryTsGarage

2 жыл бұрын

👍👍

@gregorypiercesr.794

2 жыл бұрын

My wheels are swapped and the unit is ready to haul!

@BarryTsGarage

2 жыл бұрын

Fantastic

I like the tip on flattening and riding the compression washers

@BarryTsGarage

2 жыл бұрын

thanks

Great video ! My husband is trying this out right now !

Thank you this saved a few hours of figuring out it what tools to use

@BarryTsGarage

2 ай бұрын

Glad it helped

Great Video. I had no idea how to begin to get that thing off there. After spraying on the WD-40 I just started hammering with a metal hammer on the backside pushing the whole rim which was pushing the washer.. Bent the washer on the backside, but that's no big deal. The main washer on the outside that I wanted to save came out nice and flat and smooth . It did go rolling across the patio fortunately it didn't go far . I would recommend a little catch area for the washer. Thanks again. Great video

@BarryTsGarage

Жыл бұрын

Thanks 👍

You're a saint... Thank you, quick easy and to the point!

@BarryTsGarage

3 ай бұрын

Glad it helped!

Thanks Barry! I'm gonna try it right now!

Thank you for posting this it, worked exactly the way you instructed!

Amazing Barry! Worked like a charm. THANKS

This is the way!

@BarryTsGarage

3 жыл бұрын

Haha! Love that

Great video! I was stumped until I viewed your video. Thank you!

@BarryTsGarage

4 ай бұрын

So glad it helped you

Cool, it worked! Never would've thought of that myself.

@BarryTsGarage

2 ай бұрын

Glad I could help!

Thank you so much for posting this, I've been dealing with the same issue for days, thanks to you, now I know what to do.

@BarryTsGarage

Жыл бұрын

Great!!

A Dremel tool is ideal for removing the rusted on nut. I use small pipe clamps to cinch them around the axle after tire/wheel replacement. Ya can also drill a hole through the axle, and use a cotter pin 📌, to hold the tire/wheel assembly on. Your friend, Jeff.

@BarryTsGarage

3 жыл бұрын

Thanks for the idea - I can see that would work, too!

This is the easiest and best way to do this job. Thanks Barry.

@BarryTsGarage

Жыл бұрын

I appreciate it, Robert

Thanks Barry you helped me a lot appreciate your video 😇

@BarryTsGarage

2 жыл бұрын

That’s great, thank you for the feedback, Bill!

Great job, learn it from you

@BarryTsGarage

2 күн бұрын

👍👍

Couldn’t get a hold of the clip so got a hammer and hit the rim from the back. Popped right off. Clip will fly off though so be careful.

Thank you. I have the same exact hand truck and this video was very helpful 👍

@BarryTsGarage

3 жыл бұрын

Excellent!

Thnx for Vid and link to parts. Very helpful

@BarryTsGarage

11 ай бұрын

Great!

Life saver!! Thx Barry

@BarryTsGarage

2 жыл бұрын

Glad it helped, thanks!

Very helpful! THANK YOU!

@BarryTsGarage

14 күн бұрын

Glad it was helpful!

Bingo. That didn't take very long. Great video. It really helped.

@BarryTsGarage

8 ай бұрын

Fantastic

Thanks Barry! I was trying to pry the nut off to no avail. Gonna give your method a go. BTW, that axle is 5/8", not 5/16", but I used a caliper on mine so I could get the right-sized replacement nut. Half-an-hour in the hardware section and no luck 😒

@BarryTsGarage

10 ай бұрын

You are correct - I misspoke - yes 5/8 for sure! Let me know how it goes!

Amazing work man, keep the good work !

@BarryTsGarage

Ай бұрын

Thanks, will do!

Helped a lot. Thanks

@BarryTsGarage

2 жыл бұрын

Great!

Mine was so rusted it looked like a solid cap. This worked really well but my retainer just snapped. I found an 8 pack on Amazon. I'll probably go check my local hardware stores first though.

@BarryTsGarage

Жыл бұрын

Good work, it’s always satisfying to figure it out and get it fixed. Thanks for chiming in!

Great video. Worked perfectly. Thank you.

@BarryTsGarage

2 жыл бұрын

Thank you for the kind comment

Thank you for this! Simple stuff once you know how.

@BarryTsGarage

3 жыл бұрын

I agree - true so often

Thank so much Barry!

@BarryTsGarage

9 ай бұрын

You are very welcome

worked like a charm! Thanks

@BarryTsGarage

Жыл бұрын

Great!

You are a life saver!

Thanks! I couldn’t figure out why I couldn’t easily remove wheel after taking off cotter pin…

@BarryTsGarage

Жыл бұрын

Glad I could help!

Worked like a charm! Thanks buddy! 👍

@BarryTsGarage

2 жыл бұрын

Glad to hear it, Rick. Thanks!

Worked like a champ! Saved me time and $$. Thanks, BarryT!!

@BarryTsGarage

Жыл бұрын

Great!!

Super helpful, thanks for breaking that down!

@BarryTsGarage

4 жыл бұрын

Glad it was helpful!

@willardthiessen9496

4 жыл бұрын

You did a great job of reusing the retainer ring, those give the impression they can’t be reused! Well done!

This video has helped me twice. Thank you sir.

@BarryTsGarage

Жыл бұрын

Glad to hear it! Thanks for the encouragement

I just bought a dolly from an estate sale and the wheels aren’t too great so I may need to try this!

@BarryTsGarage

3 жыл бұрын

You should!

@mikeking7470

Жыл бұрын

Wheels are cheap at Harbor Freight, so cheap I could not afford to put a tube in my old wheel, not worth the hassle.

@trukooooo

Жыл бұрын

What size its that axle? Im trying to buy a new push nut for a pressure washing and seems to be the same size.

Thank you for the video! Worked perfectly

@BarryTsGarage

3 жыл бұрын

Thanks for the positive feedback and thanks for watching!

How wonderful! The struggle has been real!! My tires are beyond ready to be swapped out and I just needed your advice all this time! Thank for the tips!

@BarryTsGarage

Жыл бұрын

Glad it helped!

Cool video. I couldn’t find my Vice grips, but I figured out you can also use a cat claw to remove that lock circle.

@BarryTsGarage

Жыл бұрын

Very good!

My dolly has pins holding the wheels on, but this was interesting! Will add it to my Brain of knowledge, and was hoping you would use a socket to reinstall the retaining washer. Thanks.

@johnathannnnn

11 ай бұрын

Hey hey! What type of pins were holding your wheels? I’ve broken the retainer clips (like the ones in this video) and I can’t find them at the store. I need a substitution. 🤦🏽‍♂️

@unclemarksdiyauto

11 ай бұрын

@@johnathannnnn Mine have cotter pins. The rod or axle has holes for the pin. I think it might be hard to drill them, but am not sure. This is the way mine came from brand new.

@johnathannnnn

11 ай бұрын

@@unclemarksdiyauto Ohhh man, that makes so much sense now. thank you for that info!

Great video! Worked flawlessly

@BarryTsGarage

10 ай бұрын

Glad it helped!

Great tip on the channel-locks!! A++

@BarryTsGarage

Жыл бұрын

Thanks for the comment, Brandon

Thank you for the info! Love KZread to learn how to fix anything!!

@BarryTsGarage

3 жыл бұрын

Happy to help!

you should probably get a tripod for that camera of yours. good info but I became seasick

@BarryTsGarage

3 жыл бұрын

Done. I wish I could go back in time and re-post. Hopefully the idea gets across anyway. Thanks for watching.

Thank you so much that was the easiest thing I did all week

@BarryTsGarage

Жыл бұрын

Glad to hear it!

Makes replacing the wheel practical.

@BarryTsGarage

2 жыл бұрын

Thanks

Fantastic video, thank you! 👍

@BarryTsGarage

2 жыл бұрын

🙏

Drill axle for pin, then washers, and back together afterward.

@BarryTsGarage

8 ай бұрын

If you are able, would be a good idea. (Not every DIYer can easily drill a hole into a round rod)

Thank you!!!! Just what I needed!!!

@BarryTsGarage

8 ай бұрын

Great!

Thank you for this

@BarryTsGarage

3 жыл бұрын

You’re welcome!

good video instruction! the only negative is the blurriness for the 1/3 of the video ....

@BarryTsGarage

7 ай бұрын

True. I’ve learned a lot since then but can’t fix it!

My Milwaukee 10” tire from HD came with a new clamping washer, but I’m having trouble installing. Socket and hammer is where I’ll go next. Wish there was a specific purpose tool that I could buy to use just the one time. lol.

@BarryTsGarage

2 ай бұрын

I encourage the socket and hammer method….

Very useful! Thank you!!!

@BarryTsGarage

11 ай бұрын

You’re welcome - glad I could help

Thank you it worked for me!

@BarryTsGarage

11 ай бұрын

Great - thanks for letting me know

Working around in a circle with a claw hammer worked for me. Used thin fogging oil besides penetrating oil. HF wheels are only 2-ply with a 300lb. capacity. Going to try Hi-Run CT 1009 wheels. They are 4-ply with a 400lb capacity - original tire specs and tread. 5/8" hole and 2" bearing length. Walma** and HD have them by order.

@BarryTsGarage

2 жыл бұрын

Very good!

@gregorypiercesr.794

2 жыл бұрын

$16 wheels compared to $5 at harbor freight

@BarryTsGarage

2 жыл бұрын

Sounds like they could be worth it.

Thanks for the video.

@BarryTsGarage

5 ай бұрын

You are welcome!

Thank you

Thanks for the video 😁

@BarryTsGarage

2 жыл бұрын

Thanks for the feedback!

nice work!!!

@BarryTsGarage

3 жыл бұрын

Thanks

Awesome. Thanks a bunche.

@BarryTsGarage

3 жыл бұрын

You're welcome!

NICE!! TY.

Yeah, I just hit those nuts with a chisel. It's totally not worth trying to save pushnuts. New pushnuts are supercheap, but drilling a hole and using a cotter pin is way better for next time.

Thank you! Stupid press on washers!

Thanks

@BarryTsGarage

Жыл бұрын

👍

You can get replacements pretty cheaply at most hardware stores too.

@BarryTsGarage

2 жыл бұрын

Good point!

When I replaced my tire I broke the piece so I just drilled a hole through and inserted a cotter pin (how they used to sell them)

@BarryTsGarage

Ай бұрын

Good job! 👍

Be a good idea to get some spare press nuts/washers before you do this, in the likely event you break one taking it off.

@BarryTsGarage

2 жыл бұрын

Wouldn’t hurt

@cameronforbes2649

2 жыл бұрын

what would Home Depot call the press nuts/washers? I'd like to get them in advance.

5/16 axel x 2 = 5/8

@BarryTsGarage

2 жыл бұрын

Yes I goofed up! Thanks

It's so weird I see this today, I just changed out a wheel on my hand truck. Easier that this, just a cotter pin, not a cap. But still weird.

@BarryTsGarage

Жыл бұрын

Huh.

I bought almost the same replacement wheels from Harbor Freight. Less than 2 years of minimal use and one of the wheels is leaking air from the rim welds.

@BarryTsGarage

Жыл бұрын

No tube?

@jaymez858

Жыл бұрын

@@BarryTsGarage It does say “rating tube type” on the side wall so I’m guessing it has a tube that punctured by just sitting mostly. I might try some sealant before replacing. I don’t want hassle with replacing the tube if possible.

@BarryTsGarage

Жыл бұрын

@@jaymez858 I get it. These things can be a hassle!

Had no idea this was how it’s done!

@BarryTsGarage

3 жыл бұрын

Happy to help!

Thank you for the video, great stuff!! :) Quick question: The tire you installed has a valve stem (tube). The link to Amazon has a solid rubber tire with no valve stem (obviously). Do you recommend tube or solid tire? Thank you! :)

@BarryTsGarage

15 күн бұрын

I have been disappointed with leaky tubes and now feel that unless you absolutely need the cushion, I would stay with solid rubber in the future. Have a great day

@4uidrum

15 күн бұрын

@@BarryTsGarage You too! Thank you! :)

I want to know how to put a big caster wheel(s) on a dolly and a simple way.I perfer to have the wheels not to swivel ?

@BarryTsGarage

Жыл бұрын

I’ve never done such a thing, but I first think of suggesting you look for locking casters, so you can control with a swivel or not. All the best to you on your project!