My caps came off easy with a small pry bar. Had trouble with the new push nut until I watched you do it with a socket. So simple . Thanks

@dantheman1109

4 жыл бұрын

I'm glad you got it. Thanks

@stephannichols2823

4 ай бұрын

What size socket?

Good to see it i just need to change 2 my wheels looks easy

Instead of the lock washer I used dorman help quick connect hose clamp, makes it easier for next time you need to change wheels

WOW thanks for the info. Not only on the how but where to get the necessary stuff. I think maybe even I could do it with your info.

Push nuts vary in style. I've always removed them carefully and reused them. If you understand how they work, you can figure out how to remove and reuse them. I've found them sold at hardware, craft, and auto parts stores .

Thanks for this upload Dan... Thumbs up from me... Stay safe... Rico

@dantheman1109

4 жыл бұрын

Thanks. I'm glad it helped

$6 for a push nut sounds expensive (at least to me). Maybe this tip will help. I just cut a slit in the nut and pryed it off and reused it. The slit is enough to release it, but not so bad that it couldn't still hold again. Now if you are in a commercial or critical use application you may want to go for the new one. Just trying to help. Thank you for posting it was a big help to me.

Thanks...now off to Amazon to get the PUSH NUT

thank you very much for the info.

@dantheman1109

3 жыл бұрын

You welcome

Thanks i was about to buy new dolly now don't need to spend my money

I ended up using a cheap assortment pack of E-Clips from harbor freight. I think I paid $5 for the whole pack of em. There is a good size in there that I was able to use on the axle with pushing it down with socket and hammer

@dantheman1109

Жыл бұрын

We make it work

YEA! I could not get off the pinch nut ima try to crack it. Thanks only helpful video for this

@dantheman1109

4 жыл бұрын

U welcome

shouldn't you put a washer before inserting the push nut? I noticed on mine it has 2 washers and 1 push nuts per tire.

I wish I had watched before ordering replacement wheels from Amazon. Harbor Freight 10" wheels are definitely a better deal. It seems really weird that push nuts can't be obtained locally, but I sure can't find them. I think that I'll purchase an 8-pack from Amazon, though, for $8.99 rather than two for $5.20.

@dantheman1109

2 жыл бұрын

I found out you can get wheels in home depot comes with push nut to but little pricey around $30 I think. Thank you for watching.

Awesome video bro , thanks

@dantheman1109

2 жыл бұрын

You welcome

Hay man, thanks. I am a mover. I live in a small town. I was forced to buy the junk that is at home depot. The wheels I got have same initial device holding in. The wheels are real wobbly. It is driving me nuts. I sent you a like and subscribed; because I am surprised there is a video out there like this. That initial nut I could not figure out how to remove....now I know. I noticed the wheel you replaced on dolly is wobbly too. How can you stand to move a dolly with heavy stuff on it; and it goes every which way? It is like a dolly on liter of everclear with those type wheels; and set up. Now you know what I go through, and thank you again sir.

@dantheman1109

4 жыл бұрын

You welcome, yes they get wobbly quick have to replace them often if you use it alot, good luck

@randyclar747

4 жыл бұрын

@@dantheman1109 Looks like the new wheels you installed were wobbly. I don't get it, that part of it. I am trying to get out of the wobbly dolly syndrome that is commonly occurring. Any advice? This can be a problem when going down a narrow ramp on truck with heavy refrigerator on your dolly on everclear, for real. I need help bro. I sent you a like and subscribed; for I was really surprised someone thought of this. I am a follower now of you Dan the man.

@dantheman1109

4 жыл бұрын

@@randyclar747 for now when ever gets bad i just keep replacing them

@biggerscranerealestategroup

Жыл бұрын

Are all dolly wheels the same size? I need to order replacements.

Gracias por tus video amigo

@dantheman1109

Жыл бұрын

De nada amigo

That wheel is flat by now, bet you anything.

@dantheman1109

9 ай бұрын

Of course

Isn't there a tube inside that can be inflated

@dantheman1109

3 жыл бұрын

Yes there is a tube inside

@hollywood5703

3 жыл бұрын

@@dantheman1109 I just pumped up my 2 flat dolly tubes. I knew they weren’t bad; just sitting too long.

@dantheman1109

3 жыл бұрын

@@hollywood5703 yes over time that happens

This should not be that complicated

@dantheman1109

2 жыл бұрын

Easy enjoy

Wd 40

Buddy why go through all the trouble of buying and looking for a push nut? Drill a 1/8's hole through the stock and insert a cotter pin. It's not rocket science but you make it complicated; keep it simple.

@dantheman1109

4 жыл бұрын

Some people can't use power tools simple

@RZ-eu2rl

4 жыл бұрын

Seems like you could also use a screw tightening hose clamp and washer.

@JRScar-dq1ex

3 жыл бұрын

@J Olender - dont worry about it - why you watching troll