My apologies. There is a section of the video where the music was louder than my voice when I was explaining my thoughts on whether I wanted to reuse the existing welded bung placement or if I was going to drill a new hole for the Wide band. I swear the audio was perfect before I uploaded the video.

@TheMatthew1967

3 жыл бұрын

Hi there..yes sounds cool. I had mine decated and I used the standard end can.. pops bangs sounds beasty on the over run..and ps I prefer to hear you not music.😜

@ToModorNottoMod

3 жыл бұрын

Haha, thanks. Honestly I liked both the sound of the decatted with OEM as well and mine of course. Sorry about the music, I swear it was perfectly balanced before I uploaded it.

@TheMatthew1967

3 жыл бұрын

@@ToModorNottoMod it's all good my friend...keep up the good work 👍

Nice video and install, the bike sounds great! , thank you for choosing our product :)

@ToModorNottoMod

3 жыл бұрын

Thanks for the comment. I am very happy with it.

Sounds great! :)

@ToModorNottoMod

3 жыл бұрын

Thank you Kyle.

Do you know how the length of the secondaries compares to the m4 header?... Also, is the width/diameter of the primaries and secondaries larger than the stock diameters??

Sounds awesome

@ToModorNottoMod

2 жыл бұрын

Thanks

Sounds absolutely beautiful. What quick shifter do you have on your bike ?? Does it down shift aswell as up ??

@ToModorNottoMod

3 жыл бұрын

Thank you Samuel. Right now I have a Dynojet Quick Shifter. I just moved to Dynojet from Healtech. The Healtech was awesome though. It has the ability to be used GP or standard pattern but doesn't do both at the same time. So in short is not a blipper.

Sounds really good....I'm still going to send some pics of mine to your other web site, I need to get some better pics since I wrapped the gold forks in carbon fiber.....haven't had a good back drop to take good pics.

@ToModorNottoMod

3 жыл бұрын

Interesting. I want to see hownthat came out

Hello i couldnt get no 1 header pipe to fully seat into the Y pipe i think this was where you had leak? You manage to get that in flush? Thanks also which which quickshifter you using in this video looks like ur downshifting and blipping yourself?

@ToModorNottoMod

3 жыл бұрын

Hey Hissan I want to say is fairly common byou should be able to get it to sit properly by playing with it. In my case mine got a bit deformed because I applied heat when I welded it but I applied a bit of pressure u ti I was able to confirm both pipes had the same shaoe and it sealed perfectly. You could always buy a joint exhaust seallike PermTex to ensure there is a tight seal. Please let mw know if that makes sense. I reolaced my Healtech with a Dynojet push/pull quickshifter. Only upshifting no autoblipping I do rev matching to do clutchless downshifts.

I just had the dealer install Delkevic Stainless Steel header on my 2019 GSXS1000Z with a Pro Race slash cut end tip... it was a bi tch to get the servo motor out.. Holy cr ap what a sound.. I almost busted in my pants. I havent ridden it yet, cant wait..

@ToModorNottoMod

2 жыл бұрын

Hahaha oh the servo! Yeah I'm glad I played Tetris when I was little because it took some doing to get it! You made me laugh! Ride it and let me know how do you like it!

@CrusaderGeneral

2 жыл бұрын

@@ToModorNottoMod did you put on a servo buddy or did you flash it? I havent checked if there is a fault light on the dash, I'm sure it's there.. I only saw and started the bike while its on the lift at the dealer... tomorrow (actually today) I'm gonna collect it.. prolly gonna need to buy some adult diapers before I get on it..😂😂😂

@ToModorNottoMod

2 жыл бұрын

@@CrusaderGeneral hahahahaha. Initially I bought a the Healtech Servo Eliminator kit but I removed it after I reflashed the ECU. That is one of the parameters you can specify when flashing the ECU.

Are you still rocking these headers? I'm contemplating replacing my factory with this depending on price.

@ToModorNottoMod

3 жыл бұрын

Yes sir. I loove the sound, I think you habe the Yoshi which should make it soumd even better than mine. No complains. Headers are good.

Estamos ligados

So what did you do with the springs from the stock exhaust?

@ToModorNottoMod

Жыл бұрын

🤔 I can’t remember but ai am guessing you don’t need them since the header comes with the springs and if you don’t have to reattach the slip you can reuse them.

Are the lextek headers wider at the manifold area than oem? or the width is similar? I have read in some forums that the width size is similar ot oem.

@ToModorNottoMod

2 жыл бұрын

Honestly I don't remember but now you are making me curious. I will find out.

@ndiomanakeracing2912

2 жыл бұрын

@@ToModorNottoMod I would be glad if you measured as I am contemplating getting aftermarket headers

@ToModorNottoMod

2 жыл бұрын

Hey Claus, instead of measuring the headers I asked Lextek ro send me the official info. I will get bavk with you.

@ndiomanakeracing2912

2 жыл бұрын

@@ToModorNottoMod that will be really kind of you. Appreciated

Received mine today looks pretty decent you ever find your slip joints leaked ? I may use sealant as a precaution

@ToModorNottoMod

3 жыл бұрын

I did but with a little playing back and forth it went away and selead. Sealant is the way to go! Let me know if tou have questions and congrats! Hope you like it

@hisaanhaq4116

3 жыл бұрын

Struggling to fit mine ive watched your video and read online manual but can get it to line up at the rear with silencer even tried stock silencer

@ToModorNottoMod

3 жыл бұрын

Send me an email with pics, the email should be in the description of the video. I will reply back when I see it.

I will be installing the black widow header with my existing hotbodies slip on and k&n filter. Chris Moore will be re-flashing my ECU and he said that no O2 sensor is necessary. What did you do with the exhaust butterfly valve (servo)?

@ToModorNottoMod

3 жыл бұрын

I removed the servo when I replaced the catalityc with my link pipe. At the time I did not have my ECU reflashed so I needed servo eliminator from Healtech to make my ECU think the servo was still on the bike. Chris is correct, with the reflash you can eliminate the servo and will not result in CEL lights on the dashboard. You can leave the servo motor in the bike and only remove the servo cables or you can remove the servo motor completely. I have a video showing how I did it. Let me know if you have other questions.

@toddcochran6416

3 жыл бұрын

To Mod or Not to Mod Thanks!

@ToModorNottoMod

3 жыл бұрын

Always

@toddcochran6416

3 жыл бұрын

Got my black widow headers installed yesterday, I chose to leave the stock exhaust port gaskets in I’ll have to see if they hold up. Fitting the exhaust was seamless and removed the butterfly and servo motor without removing the rear shock. Pretty easy job. Now for the ECU flash

@ToModorNottoMod

3 жыл бұрын

That's awesome. Send me a vid to my email when you recorda video.

Hey I just got my black widow headers and was wondering did you have to drain the radiator to move it forward?

@ToModorNottoMod

3 жыл бұрын

Hi Richard thanks for reaching out and congrats on the headers. No, if you remove the bolts at the top of the radiator and the one at the bottom should be enough to move the radiator forward. Let me know if you have other questions.

@richardfiorentino75

3 жыл бұрын

@@ToModorNottoMod great... thanks for the response

@ToModorNottoMod

3 жыл бұрын

@@richardfiorentino75 My pleasure

Did u change the steering damper or somethin? The bike luks different than a Regular Naked bike

@ToModorNottoMod

2 жыл бұрын

Hey Mahir the biggest change was replacing the bar for clip-on style. That is probably what you are noticing. Yes?

Im quite tempted to try this i have decatted stock header atm but curious if this is worthwhile

@ToModorNottoMod

3 жыл бұрын

Hey Hissan, it is personal preference of course. If you are going to have supporting mods to get the best out of it like filter and some sort of fueling controller i'll say go for it, to be honest I know some will disagree but that is the closest to a full system. Have a great day

@hisaanhaq4116

3 жыл бұрын

Thanks for quick reply, i can see you had stock manifold with decat before too, what did you notice any difference? I will be getting a remap already have remap now. Thanks 🙏

@ToModorNottoMod

3 жыл бұрын

I honestly can't tell you I felt it. Honestly, The sound is different and it's lighter so no matter what you will get some benefits. I am guessing I have better flow but I can't prove it.

Does it backfire when you use the quickshifter ?

@ToModorNottoMod

3 жыл бұрын

Sometimes, depending on kill times and tune you can hear it more or less. I am currently only killing fuel but soon i will be killing fuel and spark and that could make a difference.

Do you know if this will fit on my 2022 gsx-s1000

@ToModorNottoMod

Жыл бұрын

Hey LadiezLuvme10, the website has it listed to fit 15-20 GSX-S1000. I know is still the same engine so I don’t why it would not fit but probably a great question for Lextex. I wouldn’t want you to end up with a header you can’t use and without the ability to return it.

I have the same bike which only just got and never seen another one with the white panels. Unsure why they are white not red like many others

@ToModorNottoMod

Ай бұрын

I painted my bike multiple times. Then little by little brought it back to OEM colors.

O2 sensor mount fouling the sump, not good is it.

@ToModorNottoMod

3 жыл бұрын

Hey lewcarrum, are you asking about the OEM mounting point?

The bike that low looks super planted, im thinking about lowweing my bike, any draw backs you've noticed since lowering it?

@ToModorNottoMod

Жыл бұрын

Good question. It depends. If this is a canyon bike for you, my suggestion would be to leave it and don’t lower it. I can ride my bike wherever, I lowered it 3 years ago and still commute with her this way with no ill effect. Although I have hit a few canyons with her like this you are definitely limited by how close to the ground it is and it can be a bit more stiff and bouncy if you hit potholes and what not. The good thing is that is reversible. So if you get tired of it you can always go back. Have a great day!

@rikstar.

Жыл бұрын

@To Mod or Not to Mod race bikes are lowered, i watch moto gp and them bike are on the floor and still have great handling, Can you tell me how far you lowered your bike?

@ToModorNottoMod

Жыл бұрын

I watch MotoGP myself and I am pretty familiar with Ride-height devices. But this is no MotoGp bike haha. I know what you mean. What I meant is on a normal commute I have hit potholes or other imperfections on the street and you can feel the lack of suspension travel. It is dropped almost 3 inches.

@rikstar.

Жыл бұрын

@@ToModorNottoMod so an 1 1/2 inch should be ok

@ToModorNottoMod

Жыл бұрын

I am sure that will be perfect! Pictures when you are ready. Oh any drop beyond 1 7/8 if I am not mistaken the forks will hit the OEM handlebar. Mote than that and you are going to have to change to a different handlebar or change to clip ons.

Did you get a check engine light?

@ToModorNottoMod

2 жыл бұрын

Hey GLZY, you will get a Check Engine light when you disconnect the servo. In order to get rid of it you will either have to buy a servo buddy or the Healtech Eliminator or flash your ECU. Did I answer your question? Please let me know and Ill be happy to reply back or you can email me.

@glzybeats5624

2 жыл бұрын

@@ToModorNottoMod awesome thank you so much! Recently got a 2016 gsxs 1000 and couldn’t be happier with it! Your videos have helped me out a lot, thank you for the dope content!

How much did you pay for it?

@ToModorNottoMod

3 жыл бұрын

Hey Erasmo I just checked and is currently on sale at $290 USD. I think I may have paid a bit less but to be quite honest I don't remember but it was less than $300. The shipping was fast. It was home in a few days.

@trailrider1980

3 жыл бұрын

@@ToModorNottoMod did you order it through lextek directly? That's cheaper than what I found it for last week.

@ToModorNottoMod

3 жыл бұрын

@@trailrider1980 yes I did. Good service.

@trailrider1980

2 жыл бұрын

@@ToModorNottoMod finally bought the headers. I will install them tomorrow. Reviewing your video, prep time.

@ToModorNottoMod

2 жыл бұрын

Nice, you are going to like them!

Music is way too loud..Cant hear what your saying

@ToModorNottoMod

3 жыл бұрын

I know sorry I addressed it in the description/comment. You are right it is loud and drive me nuts. I have corrected it other videos. Thanks for the comment brother

@PhiLikeFlying

3 жыл бұрын

@@ToModorNottoMod Ok buddy. Great video regardless :)

why play music over the bits when you're talking? so hard to understand what you're saying.

@ToModorNottoMod

Жыл бұрын

I know, you can probably see that I addressed it in the comments. I stopped doing it. 👍 Thanks for leaving a comment.

Please stop the annoying music when you talk please

@ToModorNottoMod

2 жыл бұрын

✔️ No more annoying music. 🙂

I received my lextek headers but struggling to work out which one goes were as mine arent numbered 🫣

@ToModorNottoMod

Жыл бұрын

Were you able to install it. Sorry I am just seeing this comment. I know some of them can look quite similar. Does it help if you watch the install video and pause it to see if you can identify them?