Flysky FS-i6X Setup - Step 5
Assigning Aux channels depending to setup in 2_AdjustmentRemote
Custom assignment to allow VrA to control external connection to RX channel 6 (e.g. visor lightbar, rotating light beacon, RC switch etc.)
Custom assignment:
5 VrB
6 VrA
7 SwD
8 SwC
9 SwB
Standard assignment:
5 VrB
6 SwC
7 SwD
8 VrA
9 SwB
Remember to HOLD in the Cancel button to save changes
Пікірлер: 10
Hallo Super Videos 👍 Könnte sie mal die Kanalbelegung reinstellen von Aeduino weil ein Paar sachen gehen bei mir nicht Danke
@frikkiebester8895
4 ай бұрын
Hallo, what is not working on yours? Have a look at the video description to see what I changed from the standard file. I moved SwC for the gearbox from Ch6 to Ch8 so I could have a spare channel on the receiver to plug something in.
@stefangertges
4 ай бұрын
@@frikkiebester8895 Danke für ihre Antwort und Hilfe. Hallo ich nutze das ganze mit I-BUS Empfänger hätte ich da auch noch ein Kanal frei für Rundumleuchten ? Bei mir bleibt das Headlight nicht dauerhaft an und auf CH4 läuft das Servo nur einen kurzen weg zum abkuppeln.
@frikkiebester8895
4 ай бұрын
@@stefangertges yes,if you go to 2_remote.h and swop GEARBOX to 8 and POT2 to 6, then you can plug your lights directly into to Ch6 of receiver and control with VrA.
@frikkiebester8895
4 ай бұрын
@@stefangertges on 6_lights.h check it //#define SEPARATE_FULL_BEAM is commented out. Just read the comments, well described.
@frikkiebester8895
4 ай бұрын
@@stefangertges on 7_servo.h check what servo profile you selected and read the comments on the top of the page, you need to read out and put in the values for Ch4 so it knows how far to move.