kzread.info/dash/bejne/f3ucq9eraL2zXc4.htmlsi=p7-opu6ZVW7ckPNU Little bit longer🤣
@adikx52 ай бұрын
cool
@stefangertges4 ай бұрын
Hallo FrikkieBester Ich bräuchte noch mal deine Hilfe. Wie bekomme ich dein Dashboard hin hab nur das Standard Bild drauf . Arbeite jetzt mit VSC zum Programmieren.
@frikkiebester88954 ай бұрын
Hello, can you contact me via Messenger?
@stefangertges4 ай бұрын
Hallo Super Videos 👍 Könnte sie mal die Kanalbelegung reinstellen von Aeduino weil ein Paar sachen gehen bei mir nicht Danke
@frikkiebester88954 ай бұрын
Hallo, what is not working on yours? Have a look at the video description to see what I changed from the standard file. I moved SwC for the gearbox from Ch6 to Ch8 so I could have a spare channel on the receiver to plug something in.
@stefangertges4 ай бұрын
@@frikkiebester8895 Danke für ihre Antwort und Hilfe. Hallo ich nutze das ganze mit I-BUS Empfänger hätte ich da auch noch ein Kanal frei für Rundumleuchten ? Bei mir bleibt das Headlight nicht dauerhaft an und auf CH4 läuft das Servo nur einen kurzen weg zum abkuppeln.
@frikkiebester88954 ай бұрын
@@stefangertges yes,if you go to 2_remote.h and swop GEARBOX to 8 and POT2 to 6, then you can plug your lights directly into to Ch6 of receiver and control with VrA.
@frikkiebester88954 ай бұрын
@@stefangertges on 6_lights.h check it //#define SEPARATE_FULL_BEAM is commented out. Just read the comments, well described.
@frikkiebester88954 ай бұрын
@@stefangertges on 7_servo.h check what servo profile you selected and read the comments on the top of the page, you need to read out and put in the values for Ch4 so it knows how far to move.
@aureliusprimus5 ай бұрын
Very fine !! 😀
@adikx59 ай бұрын
Do you know you have glued scania mark not well? :P GREAT WORK! ;)
@andreiconstantin2vb639 ай бұрын
Very nicely done
@JEttiene9 ай бұрын
Ek bly in kanada, waar kan ek daai sound board in die hande kry frikkie?
@frikkiebester88959 ай бұрын
Hi, kontak my op Facebook messenger as jy kan.
@JEttiene9 ай бұрын
@@frikkiebester8895 dis reg so sal so maak dankie
@TheDIYGuy999 Жыл бұрын
Nice! 👍
@frenkkotarigan Жыл бұрын
Hallo frikkie, how you can use one channel (vrb) to use two different function? 🙏
@frikkiebester8895 Жыл бұрын
Hello Frenkko, are you referring to operating the trailer functions with VrB?
@frenkkotarigan Жыл бұрын
@@frikkiebester8895yes..
@blackdevilsdust Жыл бұрын
Very nice work! Thumbs up
@nolethai Жыл бұрын
Nice, it works. What was the problem?
@frikkiebester8895 Жыл бұрын
The ESP32 in the front trailer was causing a problem. Replaced it….and now 100%
@TheDIYGuy999 Жыл бұрын
Very well done!
@TheDIYGuy9992 жыл бұрын
Very nice 👍
@nolethai2 жыл бұрын
Your dog is OK, my dogs would try to catch my truck. Very beautiful truck.
@TheDIYGuy9992 жыл бұрын
😎 which sound is this?
@frikkiebester88952 жыл бұрын
Your FreightlinerCummins350!
@scotty555babe2 жыл бұрын
The alu pieces you made look really good 👍
@frikkiebester88952 жыл бұрын
Thank you…was trail and error to get the size right! Still needs some more polishing, but will do that when I fit the led’s in them!
@scotty555babe2 жыл бұрын
Awesome job my man 👌
@DanielGonzalez-mj3he2 жыл бұрын
Love the sound which sound is that?
@frikkiebester88952 жыл бұрын
Thank you, it is TheDIYGuy999’s unit. It is an awesome unit! It keeps evolving and has so many features….wireless trailer card, lcd screen, Neopixel support! kzread.info/dash/bejne/p2SYlKSoj8uvmKQ.html
@frikkiebester88952 жыл бұрын
kzread.info/dash/bejne/hoCImbx_j6XAhrg.html
@cfusername2 жыл бұрын
Thank you! That actually showed me some new things.
@frikkiebester88952 жыл бұрын
Glad it helped! Such an awesome card!
@francisvicenzi2 жыл бұрын
nice work friend! what communication mode are you using, pwm or sbus? I've been following the project for a while. greetings from Brazil!
@frikkiebester88952 жыл бұрын
Hi, the Flysky i6 I use only has iBus. I update the firmware to 10ch
@kidstiba16562 жыл бұрын
Mantap
@YetAnotherRcChannel2 жыл бұрын
Awesome. Thanks for sharing. I have lost all my old project files. Hectically trying to make everything work today made for some quite hilarious lightshow. And strange sounds.😆 Guess I just have to take my time to get everything working again. I'm on Radiomaster with FrSky transmitter and S.Bus. And the previous hardware assembly.
@frikkiebester88952 жыл бұрын
Did you download the latest V9.0 from Github? Just make sure on the remote tab that you have selected the correct radio and communication type (#define SBUS_COMMUNICATION) and you might have to change the “boolean sbusInverted = false; // false = wired to non standard (inverted) SBUS signal”
@YetAnotherRcChannel2 жыл бұрын
@@frikkiebester8895 Thanks. Yeah I tried with the newest version. Then I went back to the older one. I've managed to loose my working setup for the truck. So I had to start over again. And of course I was in a bit of a rush to get to the club for some driving yesterday. Totally screwed it up. There is no openTX/Radiomaster/FrSky setup in the repo, so I have to customize. Guess when I take my time tonight, it will be good. If i do the wrong sbus setting, nothing happens, so that is quite easy to sort out 🙂 Thanks a lot for your videos. They fill out Martins originals very well.
@snipah6602 жыл бұрын
Thank you that helps explain a lot for me!
@TheDIYGuy9992 жыл бұрын
Very good explanation, Frikkie!
@blackdevilsdust2 жыл бұрын
WOW, this looks really awesome, nice work!
@MobilJJN10802 жыл бұрын
keren kawan
@TheDIYGuy9992 жыл бұрын
Well done!
@YetAnotherRcChannel2 жыл бұрын
Cool👍 I'll do it when I've finished a few other projects✌️
@montwolfman2 жыл бұрын
Very nice! Well done.
@TheDIYGuy9992 жыл бұрын
Works fine, congratulations!
@frikkiebester88952 жыл бұрын
Thank you for your support and further developments! Now just to finish the back trailer!
@montwolfman2 жыл бұрын
Perfect. Good job.
@montwolfman2 жыл бұрын
Frikkie. I was wondering if you assemble the soundcard yourself or does DIYGuy do it for a customer?
@frikkiebester88952 жыл бұрын
You assembly it yourself…I did the one for Colyn’s Zetros. If you are in SA I can help you with one… @montwolfman
@montwolfman2 жыл бұрын
@@frikkiebester8895 Thank you for offering Frikkie. It looks like I will choose the J.T.Power Pro. light and sound unit. I'm a little worried because a few guys seem to have programming issues.
@frikkiebester88952 жыл бұрын
@@montwolfman no problem…meaning no disrespect to the people with programming issues…but if you READ the comments and instructions in the code you will have no issues!👍 I also struggled in the beginning…but when I actually read all the comments it became crystal clear and easy!
Пікірлер
Nice
LOL, nice duo!👍
Cool, please make a longer video
kzread.info/dash/bejne/f3ucq9eraL2zXc4.htmlsi=p7-opu6ZVW7ckPNU Little bit longer🤣
cool
Hallo FrikkieBester Ich bräuchte noch mal deine Hilfe. Wie bekomme ich dein Dashboard hin hab nur das Standard Bild drauf . Arbeite jetzt mit VSC zum Programmieren.
Hello, can you contact me via Messenger?
Hallo Super Videos 👍 Könnte sie mal die Kanalbelegung reinstellen von Aeduino weil ein Paar sachen gehen bei mir nicht Danke
Hallo, what is not working on yours? Have a look at the video description to see what I changed from the standard file. I moved SwC for the gearbox from Ch6 to Ch8 so I could have a spare channel on the receiver to plug something in.
@@frikkiebester8895 Danke für ihre Antwort und Hilfe. Hallo ich nutze das ganze mit I-BUS Empfänger hätte ich da auch noch ein Kanal frei für Rundumleuchten ? Bei mir bleibt das Headlight nicht dauerhaft an und auf CH4 läuft das Servo nur einen kurzen weg zum abkuppeln.
@@stefangertges yes,if you go to 2_remote.h and swop GEARBOX to 8 and POT2 to 6, then you can plug your lights directly into to Ch6 of receiver and control with VrA.
@@stefangertges on 6_lights.h check it //#define SEPARATE_FULL_BEAM is commented out. Just read the comments, well described.
@@stefangertges on 7_servo.h check what servo profile you selected and read the comments on the top of the page, you need to read out and put in the values for Ch4 so it knows how far to move.
Very fine !! 😀
Do you know you have glued scania mark not well? :P GREAT WORK! ;)
Very nicely done
Ek bly in kanada, waar kan ek daai sound board in die hande kry frikkie?
Hi, kontak my op Facebook messenger as jy kan.
@@frikkiebester8895 dis reg so sal so maak dankie
Nice! 👍
Hallo frikkie, how you can use one channel (vrb) to use two different function? 🙏
Hello Frenkko, are you referring to operating the trailer functions with VrB?
@@frikkiebester8895yes..
Very nice work! Thumbs up
Nice, it works. What was the problem?
The ESP32 in the front trailer was causing a problem. Replaced it….and now 100%
Very well done!
Very nice 👍
Your dog is OK, my dogs would try to catch my truck. Very beautiful truck.
😎 which sound is this?
Your FreightlinerCummins350!
The alu pieces you made look really good 👍
Thank you…was trail and error to get the size right! Still needs some more polishing, but will do that when I fit the led’s in them!
Awesome job my man 👌
Love the sound which sound is that?
Thank you, it is TheDIYGuy999’s unit. It is an awesome unit! It keeps evolving and has so many features….wireless trailer card, lcd screen, Neopixel support! kzread.info/dash/bejne/p2SYlKSoj8uvmKQ.html
kzread.info/dash/bejne/hoCImbx_j6XAhrg.html
Thank you! That actually showed me some new things.
Glad it helped! Such an awesome card!
nice work friend! what communication mode are you using, pwm or sbus? I've been following the project for a while. greetings from Brazil!
Hi, the Flysky i6 I use only has iBus. I update the firmware to 10ch
Mantap
Awesome. Thanks for sharing. I have lost all my old project files. Hectically trying to make everything work today made for some quite hilarious lightshow. And strange sounds.😆 Guess I just have to take my time to get everything working again. I'm on Radiomaster with FrSky transmitter and S.Bus. And the previous hardware assembly.
Did you download the latest V9.0 from Github? Just make sure on the remote tab that you have selected the correct radio and communication type (#define SBUS_COMMUNICATION) and you might have to change the “boolean sbusInverted = false; // false = wired to non standard (inverted) SBUS signal”
@@frikkiebester8895 Thanks. Yeah I tried with the newest version. Then I went back to the older one. I've managed to loose my working setup for the truck. So I had to start over again. And of course I was in a bit of a rush to get to the club for some driving yesterday. Totally screwed it up. There is no openTX/Radiomaster/FrSky setup in the repo, so I have to customize. Guess when I take my time tonight, it will be good. If i do the wrong sbus setting, nothing happens, so that is quite easy to sort out 🙂 Thanks a lot for your videos. They fill out Martins originals very well.
Thank you that helps explain a lot for me!
Very good explanation, Frikkie!
WOW, this looks really awesome, nice work!
keren kawan
Well done!
Cool👍 I'll do it when I've finished a few other projects✌️
Very nice! Well done.
Works fine, congratulations!
Thank you for your support and further developments! Now just to finish the back trailer!
Perfect. Good job.
Frikkie. I was wondering if you assemble the soundcard yourself or does DIYGuy do it for a customer?
You assembly it yourself…I did the one for Colyn’s Zetros. If you are in SA I can help you with one… @montwolfman
@@frikkiebester8895 Thank you for offering Frikkie. It looks like I will choose the J.T.Power Pro. light and sound unit. I'm a little worried because a few guys seem to have programming issues.
@@montwolfman no problem…meaning no disrespect to the people with programming issues…but if you READ the comments and instructions in the code you will have no issues!👍 I also struggled in the beginning…but when I actually read all the comments it became crystal clear and easy!