What Are Aux Channels and How to Set Up Flysky FS-i6X Aux Switches
Ғылым және технология
Wondering what "AUX" switches are? This video is for you! I'm going to explain what aux channels and aux switches are, and show you how to enable them on your Flysky FS-i6X transmitter!
In case you're looking for a great budget radio,
FS-i6X with receiver www.banggood.com/custlink/3vv...
amzn.to/2KkLlxz
Please buy through these links to help me keep this channel going!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
MY GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects!
Пікірлер: 269
I have this transmitter and your videos have been extremely helpful. Fixed wing is my thing so videos referring to that topic are most appreciated.
@RCwithAdam1
4 жыл бұрын
That's great! More fixed wing stuff coming up!
3rd video ive watched, and tbh, the only one worth watching. I am pretty new to rc and know nothing, you have just not only taught me how to assign the full 10 channels, but made it so simple and excellently narrated as you went through the process. Thank you
This was super helpful, explained very clearly, and gave me exactly what I was searching for. Thanks so much!
Thank you so much,no one explain RC stuff as clearly as you do, Great presentation & talent, very professional.
Good stuff buddy. Very well explained, no crappy music, good visuals. Told me everything I needed to know.
I agree. This is an excellent video on how to do the basic setup. I'm looking forward to visiting your site to see what else you have posted. I'd like to see a full video on setting up head tracking, if you are looking for a topic.
Hi Adam great video easily explained for a novice like me. I had tried to make these switches work without success but thanks to your knowlege I now have working accessories on my model boat.
@RCwithAdam1
3 жыл бұрын
Glad it helped
this has answered a lot of things and has enabled much more functionality
A very simple video for a complex problem thanks a lot
As usual, a great vid and explanation for us techno challenged people! Thanks, Adam.
I recently picked one up and wanted to use the aux switches, this saved a lot of time, thanks.
@RCwithAdam1
7 ай бұрын
glad I could help!
This saved my life, I didn't knew you had to activate the switches
Thanks for a simple explanation for aux switching .. cheers
I just got this Transmitter, and I am really excited to start flying!
@GrantFarrell
3 жыл бұрын
Same here. Starts tomorrow
@NeverDieKnight
Ай бұрын
@GrantFarrell same here starts tomorrow
I ordered one. When it gets here I'll need your help to learn how to set up everything. Thanks so much. See ya...
Most easy way to understand this upgrade,,,Thank you very much!😊
Great vid. I’d almost started messing with firmware when thankfully I found this video!
Thank you so much, never knew there are more settings.
Thanks so much. This was very very helpful and got me going.
Great video! Quick and to the point.
Very well done video - super clear instructions. This really helped me out!
Great video, very helpful for beginners.
Excellent explanation, thank you.
flawless video!! super helpful thanks
Thank you so much, again very helpful , a born teacher.
Just bought one of these Adam, great set up video thanks.
@RCwithAdam1
4 жыл бұрын
Glad it helped!
just purchased one of these from the link you provided on another video. Need as many tutorials as possible. Will bind it with a mobula 7 i got on banggood. Looks like it will take several months to get here for some reason. Thanks for reading my life story. LOL.
@RCwithAdam1
4 жыл бұрын
Hi, Joe! Thanks for using my link! More tutorials are on the way!
Very helpful content, thanks.
Excellent, helpful video
Great video and I really appreciate your effort
Super helpful, like many others of your videos! Thanks!
This was very very helpful.
Great information on setting the switches. Not in the manual. Kudos
@RCwithAdam1
3 жыл бұрын
Glad it was helpful!
Thanks for a simple explanation well done chee
Great Video! Thank you! I'm programming channels 5 and 6 for a robot
@RCwithAdam1
4 жыл бұрын
Robots are cool! What does your robot do?
Mine came from Banggood perfectly packaged and all channels including Aux channels were fully setup. I bound the receiver to the quad and absolutely no setup was required on the transmitter including end points ect. Amazing.
@RCwithAdam1
4 жыл бұрын
Wow! Which quad?
@OzFPVflyer
4 жыл бұрын
@@RCwithAdam1 I only bought the radio, using it for a freestyle quad I already built. In Betaflight all I had to do was choose IBUS and everything else was perfect but I did have to setup modes. I didnt need to do anything on the radio.
Very helpful video, thank you very much!
Thanks for the vid very helpful
Very helpful. I had to play catch up a few times!
this was a great help. Thank you!!
Best video on how to do this!!
@RCwithAdam1
3 жыл бұрын
Glad I could help!
This was very helpful, thank you very much!
@RCwithAdam1
4 жыл бұрын
You are ver very welcome! 😊
Thank you bro very helpful
thanks, very helpful. great video.
Very helpful, thanks!
I enjoyed this video . I subscribed .
Brilliant, mate. Understood.
It was really helpful. Thanks :)
First rate and great explanations. Thanks.
@RCwithAdam1
3 жыл бұрын
Glad it helped! 👍
Great content.. Very helpful..
Thanks for the information!
@RCwithAdam1
3 жыл бұрын
You bet!
Thank you so much for this! May I make a suggestion of perhaps setting it up for tank like steering for RC ground models? If you haven’t already? (left stick controls forward backward left and right all on one mixed control. Right stick controls camera or possibly a little turret
Very useful, many thanks. Have Fun, Joe
@RCwithAdam1
4 жыл бұрын
You're very welcome!!👍
Thanks for the information 👍
thank you, this was very helpful.))
I don’t see the aux switches settings all I see is factory reset
@Tanky2021
8 ай бұрын
Me too :(
@SkullClanReal
7 ай бұрын
Same
Good video, very helpfull
Thankk youuuu!
Really helpfull! Thanks Adam!
@RCwithAdam1
3 жыл бұрын
My pleasure!
Very helpful, thank you.
@RCwithAdam1
2 жыл бұрын
Glad it was helpful!
Thanks! I was confused...nothing I tried worked.
@RCwithAdam1
3 жыл бұрын
Glad I could help!
Thank you got half of it done
Bravo, video molto chiaro, grazie
Good tutorial thanks.
@RCwithAdam1
2 жыл бұрын
You got it! 🙌
Very helpful
Thanks man! Perfect for what I needed to know. The Flysky PDF is terrible.
Great job I got it!
@RCwithAdam1
3 жыл бұрын
Good!
Thank you very much, helped me loads
@RCwithAdam1
4 жыл бұрын
Great to hear!👍
Super info.
Yassss - oh finally. Thank you so much for this video - finally got it working - total legend. Is there any way to feed the RSSI through one of the channels so i can get RSSI through the OSD?
Mate that was an awesome video
@RCwithAdam1
4 жыл бұрын
Thanks so much!!
Supper helpful!!!
Liked the video! Few questions though. Are some of these channels Digital inputs or relays? And what are variable knobs? Resistance?
Wuhuu detail...thnks vry much👍👍👍
This helped a lot!!!
@RCwithAdam1
3 жыл бұрын
Glad I could help! 😀
Adam you’re awesome. Thanks for your helpful videos. Those printed instructions are worthless. Biggest problem for me is changing screens without screwing up stuff. I’m talking about changing pages or menus, whatever. Maybe you could explain that for us. Thanks so much.
Thank you sir .I need help regarding my rc 6 channel heli how to bind it with my 6x
Excellent thanks for this 👍
@RCwithAdam1
4 жыл бұрын
Glad it helps!
Yes very helpful cheers
Thanks for the video buddy, May I know if you know how to use the 3 position switch in a3 pro gyro?
Thanks for the video Adam, is there any way under assign switches , Idel Mode to VRA, I am only seeing the option to assign SWA to D, Thank for any suggestions.
nice, usefull video Bro, thanks
@RCwithAdam1
4 жыл бұрын
You are so welcome!
Hi Adam, I have a Flysky i6s I’m having trouble with the
thx verry helpfull
Hey Adam , I'm Tim . I just finished changing my FS-i6 into the FS-i6x from watching your other video. It took awhile but was able to get it done . Now I'm trying to assign my switches back the way they were before. I had switch (A) or your (5 aux ) as you have yours set up in this video . as normal and sport mode for Ail. Elev. Rude. With dual rates . Then switch (B) your (6 aux ) as a safety for my throttle. Motor would not turn on if the switch was down . Then I was using (D) your (8 aux ) for trainer/student mode . But now I can't get the motor safety switch (B) to work at the same time as as the sport mode switch (A). And I was watching this video for help but because it's not a FSi6x it's a FS-i6 with the mod to 10 channels. It doesn't have the same listing for aux switches. It doesn't have that option after factory reset in your video. So can you help me figure this out ? Let me know please 🙏 lol 😆
Gracias me sirvió un chingo! 🔥
Thank you :)
Compliments for your great tutorials! I learned a lot ,but................I have 1 problem setting up my FS-i6X: I built a baitboat for carp fishing (very popular in the Netherlands) and I needed 2 motors to move the 2 feeding buckets (they roll over). I combined them with the AUX Switch VRB. This works very well, but the motors are going to fast. How can I reduce the motor speed of them? I hope you can help me out.
iT WAS HELPFULL
Great tnx buddy😍🤝🏻🔥
thanks very much
Thank you ☺️
@RCwithAdam1
3 жыл бұрын
You’re welcome 😊
Thx now i know what it means I got this flysky 6 channel For my tank but the aux switches in the manual are talking about 3 stands But the transmitter has only 2 stands for the aux like yours Is that a problem ?
the more time progress the more questions i have what the maximum voltage can the reciever handle ? and how to handle a 270 deg servo it seem they require a wider range signal but nobody know how
Hi Adam ,I know it's an old post or trends,but how do u do a mix on aux 4 for mixing rudder and alleron.What I need is to switch mix on and off
Thank you so much!!!!
@RCwithAdam1
3 жыл бұрын
You're welcome! 😁
Very helpful. Is it possible to add a satellite reciever the unit?
@RCwithAdam1
Жыл бұрын
I believe so, but I've never used one.
thenks
New to FPV I have a fs-16x I am using Liftoff to learn, I would like to setup the transmitter for my X220 drone what setting should I change.
Thank you . My question how can I bind wltoys v966power star 1with flysky fs i6x ?