Sad to see the VR-4 about to go, you guys truly have done an amazing job with it, this will always be my favorite VR-4. Makes me want it so bad!

Them VR4's was before they time

I really wish you got more views, throtl’s mission is good for the car culture and it would be great to you guys achieve success

@HumblyDriven

6 жыл бұрын

Same thing I said. So agree.

This thing is going to be soooo nice for whoever wins it, keeping my fingers crossed for myself still!

Will you be making a full engine rebuild video when you spin a rod bearing from that huge dent in that oil pan?

That video quality change thooo yeeeet great investment!

Waited on this all day 😫

@throtl

6 жыл бұрын

Sorry! Drove to and from LA today and got stuck in traffic! You’ll find out tmw what we’ve been up to!

I jus got a 91 3000gt vr4 tt and I was wondering will the 6 speed thats in the later models direct bolt up to the early models like my 91

I told tj to get the VR-4 to replace the gtr after he sold it but it didn’t happen, so I love how you guys brought the car into the shop and into the spotlight again the so now legend rise again

I have an 92' white pearl SL auto, but unsure if I should invest money into into. interior is perfect/exterior other than some cracked a/c vent cover and bumper paint cracked.

hey throtl guys! does this VR-4 have the rear wheel steering system? by the way, GREAT JOB!!!! watching every videos from brazil ;)

Hey guys you are doing awesome work on the VR4. Just wanted to pass on some good feedback. i only Subbed because you were doing this VR4 and i think its super awesome. Like you said super underrated car :)

@LicualaBeauty

5 жыл бұрын

I only subbed a month ago on the latest vr4 project lol

Good luck guys

Excuse me brother I had a question for you, I just replace my engine and transmission with a JDM engine and trans, we just finished and we test the engine everything sounds and looks good but I have problems with the transmission reverse gear, do you know something about this 5 gears transmission ? Thank you in advance

I'd address that dented oil pan, that's the main cause of spun bearings in these cars. The oil pickup tube is very close to the bottom of that pan and looking at the videos it dented in. Someone used it as a jack point at one time which is a bad ideal.

@throtl

6 жыл бұрын

We spoke about this with josh. The oil Pan is not dented nearly enough to cause an issue. Maybe it looks worse on camera, but it is OK we promise!

Great job guys.. That six speed will work great so I can drive it from Cali to N.C. .

I have a 08 350z. But im thinking about getting a 3000gt off craigslist for a project car

Hi guys Does anybody knows where can i find left turn signal light cover for 1999 3000gt i Will apreciated thanks

Tell those fools in the back to shut up when your recording lol

Wait, u want a 5 speed differential with the 6 speed trans?

Idk if the giveaway is done or not but would love it lol. Im actually looking for a rv4. I foumd one near me 1992 3000gt rv4 with only 26k on it any suggestions or thoughts? Its selling for 9k

Dude looks like he could be Mike Finnegans brother lol

I joined throtl VIP. when will the winner be announced? Thanks!

Need more details on the video but overall informative and entertaining

Pls do a video on painting the 3000GT brake calipers

I need to contact you guys. I picked up a 1992 3000gt vr4 and I have a no start issue.

Where can I find parts for a gt 3000 turbo

For the love of God fix the oil pan dent. You'll give this away and it'll blow up

@benjaminbaird3798

3 жыл бұрын

I jus got a 91 3000gt vr4 tt and I was wondering will the 6 speed thats in the later models direct bolt up to the early models like my 91

While draining trans oil he says "that smells good" then Josh gave out that weird off camber laugh. My type of guy.

What bumper lip is that

well you guys should be using a B4G rear diff from a similar 6 speed 97/98 jdm GTO... proper match

Keep it!!!

I know there's a shortage of oil pans and all but you should really look into getting a new one.

@RetroMMA

6 жыл бұрын

262ners: That delivery was excellent and I actually laughed (after reading a book on 'How to laugh')...

@throtl

6 жыл бұрын

We spoke about this with josh. The oil Pan is not dented nearly enough to cause an issue. Maybe it looks worse on camera, but it is OK we promise!

@MaelstromRaine

6 жыл бұрын

throtl I don't know you guys. That's a hefty dent. Hopefully it's at least been dropped ND the pickup tube and filter has been checked. Usually, when it's been jacked up by the oil pan, it bends enough to block a good portion of the pickuo tube because it is a tight fit in there.

@jacobe3343

6 жыл бұрын

I'm not trying to come off rude or disrespectful in any way and I'm not doubting your buddies legitimately as a Mishibushi tech but no tech I know Mishibushi or not would let a pan that dented slide. Regardless of the dented man it's really cool to see someone give this platform some light. I'm looking forward to future content.

@ShuraHaidate

6 жыл бұрын

I would 150% stop listening to Josh. That is NOT an okay oil pan. There is 8-10 MILLIMETERS of clearance between where the oil pickup is and where that pan normally sat. That pan is dented INTO the oil pickup. You are going to cause a spun bearing. Spend the extra $200 and get a new pan without a dent. You have hundreds of people telling you to replace the damn pan. Josh is wrong.

Sorry to hear about someone stealing your wheels I hope you find him/her

CWB squad 😊👍

"It's an amazing machine."

Does josh have an instagram? I have a few q’s for him about my 3k :(

Im in looove

Do a 60k/120k service!

So is this an MR 6 Speed? Because if it is, it'll work with your 5 speed diff. But if it isn't then the VCS will basically eat itself and you'll end up with a FWD car..

@beaubrowning7307

6 жыл бұрын

Javier Caldera his insistence on using the buzz term "JDM" it's clear he's acquired a GTO MR 6speed transmission since his VR4 came from the factory with a standard 6 speed. I hate when people either choose to distribute incorrect information or just choose to be ignorant.

restock the windshield bannersssss!!!!

vr4...is my dream car ever after first look in thunderbolt film....i hope to own vr4...but to win i think is impossible....i m far away in malaysia....just keep dreaming..

Mind setting the winner up with a camera so we can keep up with the car? It's really grown on me.

How much for the old 6 speed?

@throtl

6 жыл бұрын

Not willing to ship, but we’ll let it go for very cheap. Please email rick@throtl.com

Whoever wins this make sure you replace the oil pan asap! That's a spin bearing ticking timebomb!

@throtl

6 жыл бұрын

We spoke about this with josh. The oil Pan is not dented nearly enough to cause an issue. Maybe it looks worse on camera, but it is OK we promise!

@CoreysCave

6 жыл бұрын

I came here to make the same exact comment. These things spin bearings frequently from that exact problem. It’s really a factory manual issue because they tell you to support the engine there when doing the 60k service. They are almost always dented.

That reversal shot fukked me up. hahaha kzread.info/dash/bejne/eqOYydGqj7WbZ7Q.htmlm29s

I can't join because I don't have money or credit card and I'm only 14

Please tell me your gonna ship the VR4 to Puerto Rico when i win it

Needs more Hyundai love

Your biggest problem is that oil pan brother.

@throtl

6 жыл бұрын

We spoke about this with josh. The oil Pan is not dented nearly enough to cause an issue. Maybe it looks worse on camera, but it is OK we promise!

@dsmhunter2949

6 жыл бұрын

throtl Okay brother just looking out for you guys, if he thinks it'll be fine then finish her up and send it! I have a 1995 Mitsubishi Eclipse GSX I'm building from the ground up and I have to say watching your channel has only motivated me more for my baby. Keep up the good work guys! 👍

@andrewmcintosh9832

6 жыл бұрын

throtl If the pan is even slightly dented it will cause issues. The pickup tube is only a couple mm from the bottom of the pan. That car is getting starved for oil at high rpms gauranteed!

@mitsumad3706

6 жыл бұрын

With all do respect and not to be rude, your talking about an $8 tube of rtv/silicone sealant and about an hour labor to repair that dented oil pan, that needs to be addressed asap or you are just asking for problems. The pickup for the oil pump has a very tight clearance to sump in the oil pan on these engines, even a minor dent can cause catastrophic main and rod bearing wear and even failure. I've seen way to many of these cars meet their demise from this exact issue. I know other 3/S enthusiasts are dying on the inside seeing that oil pan dented like that, just fix it and make the mitsu gods proud!

@atmosphericpressure3560

5 жыл бұрын

I just got a 3KGT SL with a blown engine. Is it best to rebuild or buy a used low mile engine?

the person that gets this car is gonna be sooo lucky...beautiful build, sweet car.....

How much $ ...it was $8000 in late 90s I was a Mitsu tech I would put RTV IN TRANSFER female splines , only 3/32" grip in splines

Yo I have a 3000gt my 2nd gear isn't working at all, can I just bring u guys my car

Better than the vr4 there is nothing better than a vr4 lmao

I want it sooo bad but i have no money!!!!!! :, ( fukin college, unable to work

...and you guys want me to blieve that you are giving it away 4 free.

Pause just before 2:50 😂😇

@hourglass3856

6 жыл бұрын

When he partially smiles between 2:49 and 2:50 his cheeks like puff out. No offense Beckerman if tou read this just thought it was funny

Being knowledgeable in cars and awesomeness! Why in the heck will you use any jack from harbor freight!? Spend the extra buck screw harbor freight

😍

First like I should win he VR4!

Here how to make the Vip better... *MAKE IT FREE FOR EVERYONE OR JUST GIVEAWEY CARS AND STUFF TO THE WHOLE COMUNITY NOT JUST VIP* THIS IS THE BIGGEST PROBLEM THAT THIS CHANELL HAS... spliting the comunity (just battlefield/dice/ea)

Hey, I sent a message like you said but you never replied back. :/ It wasn't spam just told my story. Lol Sorry if it seemed that way.

Hello throttle I have been subscribed for maybe 2 or 3 months not sure how long but like all the awesome content I think the vip should be free so that more car enthusiasts would join and I want to join but I don't have the money for it I know $10 is not a big deal but it if was free I would sign up right now and recommended it to my family we have so many car we have evos Rsx civic Subaru's and more so please take in consideration to make the vip free

@ritvik9221

6 жыл бұрын

There would be no point in VIP if it wasn't paid for. Just cough up the money if you want VIP so badly, otherwise just use Throtl.com without it.

Good job not even machining the flywheel. Way to spread doing things the wrong way. I'm surprised you didn't do a pad slap. Smfh... And what garbage shoo painted your mufflers?

@throtl

6 жыл бұрын

LeRoy, we appreciate the concern and talked in depth about this with Josh. On these cars, it’s a problem to resurface the flywheel as it changes the positioning of the clutch fork and causes uneven wear and even more difficulties. The flywheel on this car is in acceptable condition and didn’t require replacement. Also, the overspray has also been removed.

@leroyperoutyjr.8738

6 жыл бұрын

throtl Causes uneven wear because of the positioning of the clutch fork.... I'm not sure that you actually know how the system works. The only thing that would change the position of the clutch fork would be the pivot ball or the slave cylinder rod. Machining the flywheel is always recommended unless there isn't enough material, then you replace it. Period.

@wobwobwobination

6 жыл бұрын

Common reason why the flywheels don't get resurfaced is that the shops don't resurface and shave the dowel pins as well. It's why they cause issues. Nonetheless, if the flywheel looks fine, I don't see why you'd need to replace it. I haven't replaced mine and I've put 9k miles on my car, the old one looked in good condition so I didn't bother.

@beaubrowning7307

6 жыл бұрын

These cars use two step flywheels. When you machine the friction surface (as you should), you also have to machine the edge risers as well because failure to do so reduces clamping pressure. The dowels dont get machined, they're only for alignment.

@wobwobwobination

6 жыл бұрын

Beau Browning correct. I forgot the correct term but I remember speaking to my buddy about it a while ago