Sometimes it's just that simple, thanks for showing us how easy it can be, now I'ma try this on my friend's Saab and see if it works, it's such a lovely car.

That's just what I needed to see... Drivers window stopped working this morning... I'll get someone who is good at stripping stuff out and not breaking anything before putting it back in order.... Thank you. Great vid.. will follow

Your now my go-to Saab KZreadr x

Nice. So this is the process removing the convertible door card, very helpful thank you!

Hopefully no longer going to have to open my door at the mcdonalds drivethrough

@Skootavision

13 күн бұрын

Made me laugh -I’ve been telling my daughter that as soon as my window works I’m treating myself to a drive through 😂

Super , ich hatte dasselbe Problem an meinem SAAB Cabrio. Danke für den Hinweis. Mein Schalter funktioniert nach der Reinigung mit Kontaktspray auch wieder. I had the same problem. Thank for your advice. I cleaned the switch as shown and now it works again.

It worked perfectly mate, big thank you for the tip 👍👍👍

Have to do this on my 06 aero, worked fine, came back 45 minutes later and nothing. thanks for the vid to make it easier! Also, love that you just walk away from the door panel leaving it hanged in disgrace and disgust like a lover's betrayal.

@SaabUnleashed

2 жыл бұрын

Hahaha! Love that analogy :)

Yep same as Gerard....great vid and banked for future reference...I have a 9-3 convertible and expect this to happen to me one day. 👏

Very useful i will try mine as the drivers window just suddenly stopped working was fine yesterday today nothing

Nice one! Thanks for sharing

Thank you very much, so helpful!

That done the job perfect thank you very much 😁

Great video hoping this will cure mine

Thank you, one day I'll probably need this. Consider this video saved, plus you get a like from me. 👍

Great job 👏 thanks

When the PDM is replaced, does the new part have to be married with the TEch2 device or will it work without it? Colleague "Saaber" says that it will work without problems, except that it will be seen on the Tech2 device that it is the second PDM number

Did you just pull away the door card from the bottom or up and away to get over the hooks ?

Any idea what fuse number is for driver side window on an 06 9-3 ?

thanks for guide on CORROSION

Hi nice work. Not sure if this is my issue but some forums suggest so. Have no window, mirror or locking power drivers side (RHD 04 Aero vert) You didn't happen to note the part number of the unit did you? With comfort opening & pinch protection? Thanks

@SaabUnleashed

3 жыл бұрын

If you have lost all of those things, it's more than likely the wire loom that's the issue, at the door hinge in the rubber pipe. Constant bending of the wire can eventually lead to it breaking

@waihekeman

3 жыл бұрын

@@SaabUnleashed thanks for reply. It coincided with "lock system failure" on my SID, but Tech2 showing no DTC's. Bizarre Saab stuff, harder when much of the info & part numbers relate to LHD. I'll post a resolution when I have one. :)

Always use an eraser on the back of a pencil to clean contacts ...been doing it for 40 years

When putting the door panel back on, do you need to hook the bottom part first and then work your way up? Or top down, by inserting the door lock barrel first?

@SaabUnleashed

3 ай бұрын

Top down

@shakeelfaris7623

2 ай бұрын

In the video, you hooked the bottom hooks in first, then put the door lock pin in, is that correct? I’ve just done a speaker upgrade and I’m having trouble getting the hook at the bottom closest to the speaker flush, so that part of the door card just doesn’t want to sit flush against the door card. There must be a technique?

Do you know how to replace the outer doorhandle?😉

Greetings from Croatia I have the same Saab the same age. My problem is the rear window on the passenger side. I can't put it down. I could have a problem with the window lifter. Hello again and it is a beautiful car.

@SaabUnleashed

3 жыл бұрын

I didn't see this. Depends if the window goes down with the roof switch or not. If it doesn't, the issue would be with the window regulator.

I'm slightly confused; at around 1:50 you take the mirror controls off. You have a bit of a look at the thing, but there's no sign of you disconnecting anything. Is there some wiring connected to those controls?

@SaabUnleashed

Жыл бұрын

Yes, sorry. There's a single loom that you need to unplug from the back

@jgmccabe

Жыл бұрын

@@SaabUnleashed Thank you 🙂

@redgeminipa

3 ай бұрын

Mine unplugged itself when I removed it. It appeared his did, too.