Watch this video to fix your Saab 9-3 door lock actuator failure for free
Жүктеу.....
Пікірлер: 40
@axleung1 Жыл бұрын
Thanks for your positive feedback. Keep Saab alive!!!
@thomaskung186511 ай бұрын
Thanks boy. I habe suffered for five years with this problem. Ill try it right away. May gid bless you!
@BeSlight9 Жыл бұрын
Saabs are such a love and hate relationship shes my bitch though 😂😩
@randallnicely760 Жыл бұрын
I tried this and it actually works 🎉 I have to keep doing it every couple of days so maybe at some point I will change the actuator. But thanks for sharing I was amazed when it actually worked. 👏🏾👏🏾
@stansmolin1870 Жыл бұрын
I have exactly this issue for a week now! You made this video just in time. My lock stucks almost every day, but it works after I unlock it manually. I planned to change the lock, but I decided to check youtube first.
@axleung1
Жыл бұрын
Glad to be of help 😊
@jlrdKaiser6 ай бұрын
. good video, thanks for sharing. The locks are controlled by the BCM. For safety reasons, it is disconnected after more than 10 close/open operations. Also in case of accident the doors open. In case of theft the alarm is activated. In case of locking due to heat, material deformation, strong friction, the lock does not work, deactivated for safety by the BCM. WD-40 works miracles. In the case of cold ice the same thing happens.
@martinzhu7250
6 ай бұрын
Where to spray the WD-40 on? Directly to the door latch or from the upper door lock?
@jlrdKaiser
5 ай бұрын
@@martinzhu7250 In the upper door lock
@klubbaklubban6546 Жыл бұрын
Ty bro greetings from Sweden 🎉
@justinreynolds341110 ай бұрын
Thanks, this helped me a lot
@AceEquality Жыл бұрын
I'll give this a shot bc my rear passenger just started doing this a couple of months ago. I'll keep you updated. Thanks!
@AceEquality
Жыл бұрын
Didn't work ☹️
@AceEquality
Жыл бұрын
Interesting enough... after trying this 3 times, it failed to work. Then, decided to remove the fuse, put it back in, woke up the next morning, held down the unlock button on drivers door and let the magic happen. It WORKED... but now, my auto window up and down does not work. Whatever... I rather the door lock work!
@dyloncorreia1204
Жыл бұрын
@@AceEquality there a relearn to do for the windows
@larsjrgensen59758 ай бұрын
The motor inside the lock has 2 contact pins that get dirty and some of the grease from all the gears will go onto the pins to. The lock needs to be taken apart to clean the pins, the motor does not spin or move when the locking pin is moved manually, so this is not a permanent or lasting fix. There are other guides out there showing how it is done. I just did it on my 09 9-3 with the advanced lock system, it is messy and book 3 hours to do it first time.
@dekush936911 ай бұрын
Thank you man!
@azamatibraimov4553 Жыл бұрын
Thnx! I will try it👍🏽
@bendikertsas4824 Жыл бұрын
Thank you so much!
@axleung1
Жыл бұрын
Thanks for watching😊
@oceantrolls7332 Жыл бұрын
Awesome. Thanks
@drtb69 Жыл бұрын
Thank you
@adamwills507710 ай бұрын
My wife’s new fob doesn’t work and when she locks the door with door switch it Auto Unlock’s any thoughts?
@monolith4653Ай бұрын
I will try this but I have a different issue where my some of my doors unlock by themselves if i leave the car locked for more than a day.
@user-dp3xr4gn8u9 ай бұрын
I have this issue but if i use the key fob to unlock the door twice, it unlocks the second time, any ideas. I have tried your method but it hasnt worked.
@axleung1
9 ай бұрын
Sounds like a programming issue
@lorddiablo8575 Жыл бұрын
Man, I also have the same problem to my 2006 9-3 ! In which, the driver side lock work on & off, but the passenger side lock works normal.... Could you tell the part number so I can also order one for replacement ? Thanks !
@axleung1
Жыл бұрын
12759689
@lorddiablo8575
8 ай бұрын
Thanks a lot ....🙏🙏❤❤ @@axleung1
@TheHell666yeah Жыл бұрын
Mine just work in hot weather.
@siilias7345
Жыл бұрын
Same!
@jacobfrasca1139 ай бұрын
I think (hope) this is satire.
@drewolf-zs6mt
8 ай бұрын
He's not joking 😅😂
@marfer62895 ай бұрын
U talked to much
@Mechone11 Жыл бұрын
Sorry thats not the issue ,I have had that years ago ,have owned it for 18 years . Its the little motor on the actuator dis simular metals on the contacts add solder and have never had a failure again . Same issue on wiper motor dis simular metals galvanic corrosion alumumin to copper
@bradley7240
11 ай бұрын
Where do you add solder?
@larsjrgensen5975
8 ай бұрын
@@bradley7240 Just resolder the pins on the little PCB that delivers power to the motor. Give the pins some solvent and a toothbrush, same for the motor, but only clean the motor and not all the gear grease that is also in the box.
@bradley7240
8 ай бұрын
@@larsjrgensen5975 thank you Lars I will give it a go!
Пікірлер: 40
Thanks for your positive feedback. Keep Saab alive!!!
Thanks boy. I habe suffered for five years with this problem. Ill try it right away. May gid bless you!
Saabs are such a love and hate relationship shes my bitch though 😂😩
I tried this and it actually works 🎉 I have to keep doing it every couple of days so maybe at some point I will change the actuator. But thanks for sharing I was amazed when it actually worked. 👏🏾👏🏾
I have exactly this issue for a week now! You made this video just in time. My lock stucks almost every day, but it works after I unlock it manually. I planned to change the lock, but I decided to check youtube first.
@axleung1
Жыл бұрын
Glad to be of help 😊
. good video, thanks for sharing. The locks are controlled by the BCM. For safety reasons, it is disconnected after more than 10 close/open operations. Also in case of accident the doors open. In case of theft the alarm is activated. In case of locking due to heat, material deformation, strong friction, the lock does not work, deactivated for safety by the BCM. WD-40 works miracles. In the case of cold ice the same thing happens.
@martinzhu7250
6 ай бұрын
Where to spray the WD-40 on? Directly to the door latch or from the upper door lock?
@jlrdKaiser
5 ай бұрын
@@martinzhu7250 In the upper door lock
Ty bro greetings from Sweden 🎉
Thanks, this helped me a lot
I'll give this a shot bc my rear passenger just started doing this a couple of months ago. I'll keep you updated. Thanks!
@AceEquality
Жыл бұрын
Didn't work ☹️
@AceEquality
Жыл бұрын
Interesting enough... after trying this 3 times, it failed to work. Then, decided to remove the fuse, put it back in, woke up the next morning, held down the unlock button on drivers door and let the magic happen. It WORKED... but now, my auto window up and down does not work. Whatever... I rather the door lock work!
@dyloncorreia1204
Жыл бұрын
@@AceEquality there a relearn to do for the windows
The motor inside the lock has 2 contact pins that get dirty and some of the grease from all the gears will go onto the pins to. The lock needs to be taken apart to clean the pins, the motor does not spin or move when the locking pin is moved manually, so this is not a permanent or lasting fix. There are other guides out there showing how it is done. I just did it on my 09 9-3 with the advanced lock system, it is messy and book 3 hours to do it first time.
Thank you man!
Thnx! I will try it👍🏽
Thank you so much!
@axleung1
Жыл бұрын
Thanks for watching😊
Awesome. Thanks
Thank you
My wife’s new fob doesn’t work and when she locks the door with door switch it Auto Unlock’s any thoughts?
I will try this but I have a different issue where my some of my doors unlock by themselves if i leave the car locked for more than a day.
I have this issue but if i use the key fob to unlock the door twice, it unlocks the second time, any ideas. I have tried your method but it hasnt worked.
@axleung1
9 ай бұрын
Sounds like a programming issue
Man, I also have the same problem to my 2006 9-3 ! In which, the driver side lock work on & off, but the passenger side lock works normal.... Could you tell the part number so I can also order one for replacement ? Thanks !
@axleung1
Жыл бұрын
12759689
@lorddiablo8575
8 ай бұрын
Thanks a lot ....🙏🙏❤❤ @@axleung1
Mine just work in hot weather.
@siilias7345
Жыл бұрын
Same!
I think (hope) this is satire.
@drewolf-zs6mt
8 ай бұрын
He's not joking 😅😂
U talked to much
Sorry thats not the issue ,I have had that years ago ,have owned it for 18 years . Its the little motor on the actuator dis simular metals on the contacts add solder and have never had a failure again . Same issue on wiper motor dis simular metals galvanic corrosion alumumin to copper
@bradley7240
11 ай бұрын
Where do you add solder?
@larsjrgensen5975
8 ай бұрын
@@bradley7240 Just resolder the pins on the little PCB that delivers power to the motor. Give the pins some solvent and a toothbrush, same for the motor, but only clean the motor and not all the gear grease that is also in the box.
@bradley7240
8 ай бұрын
@@larsjrgensen5975 thank you Lars I will give it a go!
Didn't work at all.