🎥 Door mirror removal: kzread.info/dash/bejne/Z4WD1bpwpa2deqw.html

This is precisely how an informative DYI video should be done. bravo!

I've just bought a 9-3 - 2008 Saab, from an owner that really didn't take care of the car, so as you can imagine, lots of things are not working or just broken by negligence or just pure laziness. Your videos are what I needed. These are the best DYI videos I've seen in long, long time! Straight to the point, additional advices, useful information, clean speaking, no annoying music, etc. You are an awesome person! Thank you!

Thanks for this, hopefully I can my windows working again 👍

Very informative, ahead of my door trim wrap project. Thank you!

excellent video CC, another video helping others to have the confidence to tackle this task.

The best instruction vid iv seen. Very clear and great visuals.

@CycloneCyd

Жыл бұрын

Glad you enjoyed it, thanks for the feedback Daren

very detailed informative video. Thank you.

You teach nicely, unfortunately I own a 1999 Saab 95 SE 6 cylinder, I think it's the old generation, but I still love it and wish you had the 95 instead of the 93, because then I would be set having you as my teacher for life on my 95 🙂. Any one else out there or you, teacher, can do 95 repairs to show us 95 owners, because, so far your the best teacher, because you explain everything nicely to a precision manner, love you man 👍

Great video...well done. This will save me a lot of time and less frustration.

Thank you, that was really very clear. This the first time I saw you on YT. Not often to find someone having understanding of the techniques, but also having patience and empathy for the novices among us. Clear video, not obstructed by any body parts, no bad language, without superfluous repetition. A pleasure.

Excellent video. Very informative . Well done

Many thanks Cyd, You saved Me a lot of time with this video.

@CycloneCyd

2 жыл бұрын

You're welcome!

This is very helpful, thank you!

That was a very instructive and helpful video. Thank you for explaining that so clearly that even a non mechanic like me can understand it. You've got a new subscriber. 👍

@CycloneCyd

2 жыл бұрын

Glad it helped

Great video, very helpful. Thanks.

@CycloneCyd

2 жыл бұрын

You're welcome!

Perfect…thank you! Time to tackle the project now.

@CycloneCyd

Жыл бұрын

You can do it!

Love your Saab videos. Keep them coming! Do you have any tips on installing a front strut brace for a 2.0T? Mk2.

Thanks Cyd for the info, good videos, subscribed

@CycloneCyd

Жыл бұрын

Awesome, thank you!

Super like your videos

very good job thank you

@CycloneCyd

2 жыл бұрын

Most welcome

Thank you! Fixed my regulator on rear driver side door 6 months ago and must have not attached the plastic seal very well as now we’re getting slammed with rain here in CA my window is leaking onto the footwell behind driver seat. I got more butyl tape just in case and needed a refresher on getting door card off. Hoping that’s the issue. Will find out later today.

Thank you Syd for excellent quality documentary in laymen terms we can all understand. i'm going to tackle the "squeeky" but still functioning heater fan, clicking dashboard recirc unit & pollen filter re seal as per your video. I ordered last week the alloy t-piece you recomended. while I have some time off work. I just have one remaining Saab issue on a 2005 9-3 Convertible. Ive owned this car 5 years now and the speedometer works one day then not the next. It will work for a week then not work for a few days then back to working. I expected it to totally die after 5 years but it still does the same. Any thoughts on the this problem would be very appreciated Syd

Thank you! This video helped me change my broken window on the driver side to a new one. It took me 4 hours to do it. Tricky to clean out the interior from broken glass. Maybee you could make a video on how change a side window on a 9-3. I could not find any. Big thanks!

Thanks for this video cyd, got to get the nearside rear off my estate due to door lock not working on the central locking. Thanks, vinny. :-)

@CycloneCyd

3 жыл бұрын

The rear casings come off the same way as the fronts 👍. Don't try to pull the door shedder off. It is flimsy foam sheet and is stuck on with strong 'mastic'. Cut the mastic with a craft knife with a new blade. Once you've exposed the door cavity, the latch is easy to get at.

@vazza7504

3 жыл бұрын

@@CycloneCyd Thanks for the tip Cyd, will be extra careful accessing the rear door lock. Thanks, Vinny. :-)

Do you have a video about making the physical interior door handle work? I think you briefly covered it in this video . I had to take door interior off yesterday to replace speaker but now I can’t open the door from the inside

I threw out my handle cover not noticing the replacement didnt have it. Thanks for this video i have to replace afew things there soon.

@CycloneCyd

3 жыл бұрын

Probably in the summer, I'm planning to do more videos about the door inner workings and also gonna investigate and try to resolve annoying rattles coming from the doors.

@kevinrios8127

3 жыл бұрын

@@CycloneCyd cool ill be tuned in.

Spot on..

@CycloneCyd

3 жыл бұрын

Many thanks. There'll be more door related stuff as the summer progresses.

THX :)!

@CycloneCyd

3 жыл бұрын

Welcome!

Hi Cyd, is there a 'noddy guide' for solving the drivers door locking button only coming up intermittently please? Not sure if it's related to the passenger side door window not working from the drivers door card switch..

Could you make a video of you upgrading the cable between the battery and the alternator? The positive cable of course. I need to do that myself soon. :)

@CycloneCyd

3 жыл бұрын

added to the list 👍

Hi Cyd, great video as always. Do you have a link to the solar panel that you use to keep your battery topped up?

@CycloneCyd

3 жыл бұрын

I've had it a while now - I believe this is the updated version bit.ly/12V_solar_charger It does the job quite nicely.

Hi, a video of how to replace the shark antenna please.

@CycloneCyd

3 жыл бұрын

Added to the list 👍.

Hey! Thank you so much for your incredibly educational videos. Very helpful! I have a question though. Do you have a video showing how to fix the membrane inside the door panel? I have the problem with my saab 9-3 2006 that water leaks in through the back door and then through the sill down to the floor. Would be extremely grateful for a video showing how to fix the water-repellent membrane. Apparently a common mistake on these nice cars. Keep up the good work, I keep looking :)

@CycloneCyd

2 жыл бұрын

Not yet! Once the casing is off the door, you can remove the shedder by using a craft knife to cut through the butyl that holds it on. It's quite a feeble foam used as stock. Get some of this to replace it with s.click.aliexpress.com/e/_98tbH1. 6mm thick is good. 100x50 will do one door and 200x50 will defo do 2 doors maybe 3. Cut out the shape (either use card or the old one as a former) and simply stick it to the door panel in place of the old one. Don't forget the cable entry points!

@Krite138

2 жыл бұрын

@@CycloneCyd Thanks so much for the tip! Have temporarily fixed it with tape so that the water does not enter the cabin. Should definitely order a replacement and fix it properly. Thanks so much! Have a nice day :)

It seems hard to find any repair videos on 1999 Saab 95 SE sedan 6 Cylinder ☹

I have a 9-3 Convertible, I need to replace the handle. I have a spare , I know there are 2 x Torx screws on the outside, is there also one on the inside of the door panel? If so would I still need to undo the cables or is there enough slack?

@CycloneCyd

Жыл бұрын

which handle?

@anthonymoney6471

Жыл бұрын

@@CycloneCyd passenger side.

question have you ever had gear change issues,my 2006 9-3 some times will not select 1st,but go from 2nd to 1st its ok..any ideas?

@CycloneCyd

3 жыл бұрын

Manual box? which one, 5 or 6 speed?

@MINIMOTOMADNESS

3 жыл бұрын

@@CycloneCyd Manuel 6 speed,

@CycloneCyd

3 жыл бұрын

@@MINIMOTOMADNESS yeah, mine's the F40 too. It does have a number of issues, generally. On mine I have no problem going into 1st even on the move at 10mph. First thing to do is change the fluid. I use Castrol Multivehicle 75w90. The problem is most likely a worn or soft rubber insert on the fore/aft change cable at the gearbox. I am planning to do a mini series on gearchange issues, but later in the year.

My alarm activates by itself, the doors don't lock and unlock, they are all different every time

Im fuckin pissed that my convertible has hooks that i broke instead of these clips

@CycloneCyd

Жыл бұрын

Yeah, you would be

@abdomination

Жыл бұрын

@@CycloneCyd on top of that.. speakers in the panel instead of door.. screwed through the panel with shorter aftermarket speaker once lol

It does NOT come off quite easily

@CycloneCyd

2 жыл бұрын

What are you having difficulty with? These have to be easy to put on, remember, some Nobby Nolevels had to assemble it in the factory.

@alexandredionisio9280

2 жыл бұрын

@@CycloneCyd I saw another video with a variation how you snap it off. But mine were really tight. I've been upgrading my 9-3 Aero. This weekend I'll install SPA with the propper cable harnesses and the AMP2+speakers+harness

@CycloneCyd

2 жыл бұрын

@@alexandredionisio9280 tight is good. Less rattling