One big question, why do you remove the whole door panel if that isn't necessary? Thank you.
@fly-fpv4 жыл бұрын
Do you think it is possible to remove the backcover (silver part) without removing the whole mirror? Want to repaint it.
@TheFlyingMechanicDIY
4 жыл бұрын
Yes u can, remove the glass, while the mirror is attached and u should have enough access to release the taps (u will have to move the mirror between fold and unfold position)
@STAMATAKISM3 жыл бұрын
Great video!As well, i have an issue about the folding operation.Actually there is no operation when i push the folding button, but i am hearing the silenoid motor turning (without folding mirror) for a few seconds!I suppose that the damage is comming from the spring that holds the mirror over the silenoid motor.Could you make a video, how to disassemble by secure, the mirror?In that case we should see the spring, so by a screw driver, we can turn it to the rigth direction and solve the issue.It' s a very common problem for SAAB 9-3 MY 2003-2007.Thank you.
@georgekolotouros9176
3 жыл бұрын
Καλησπέρα . Εχω ακριβώς το ίδιο πρόβλημα σε SAAB 9-3 μονέλο 2005 . Εχεις βρει λύση ?
@STAMATAKISM
3 жыл бұрын
@@georgekolotouros9176 καλησπερα.Το προβλημα ειναι μαλλον, στο ελατηριο επαναφορας.Θελει λιγο κουνημα για να ερθει στην θεση του, αλλα για να γινει αυτο πρεπει να δουμε πως θα ανοιξουμε τον καθρεπτη, χωρις να κανουμε καποια ζημια.
@georgekolotouros9176
3 жыл бұрын
@@STAMATAKISM Kαλημέρα. Εχω μιλήσει με αντιπροσωπεία ,με δύο συνεργεία saab , αλλά και με τον marcus kzread.info/dash/bejne/dp6kzqOMaKSZdbg.html και η απάντηση ηταν μόνο αλλαγη καθρέπτη .
@STAMATAKISM
2 жыл бұрын
@@georgekolotouros9176 φιλε μου μετα απο καιρο σου απανταω σχετικα με αντιπροσωπεια και Marcus.ΚΑΝΕΝΑΣ δεν σου λεει πως να επισκευασεις!Μονο να αλλαξεις!Σιγουρα κατι πρεπει να γινεται με την επισκευη.Τι δηλαδη, πρεπει ν' αγορασουμε ολοκληρο καθρεπτη;Πιστευω πως ο flying mechanic κατι θα μας δωσει.Τα ιδια λενε και για τις κλειδαριες.Αν δεις το αντιστοιχο βιντεο του, πως επισκευαζονται, θα εκπλαγεις!Εγω ηδη επισκευασα του συνοδηγου.Ειναι μεγαλος μαστορας!
@klein20424 жыл бұрын
How did you get the damn control panel out? Did you just wedge it with the screwdriver?
@TheFlyingMechanicDIY
4 жыл бұрын
Saab Rider , if u mean the mirror control panel, then yes after removal of the door inner panel it just pulls out
@lovediecastdetails22695 жыл бұрын
on an 06 SC US model someone told me to get the door harness loom from an 03? and do you mind letting me know the part numbers for the switch controller?
@TheFlyingMechanicDIY
5 жыл бұрын
Im sorry, but to provide accurate information you will have to provide me with VIN number which i don’t recommend posting it to the public ..
@lovediecastdetails2269
5 жыл бұрын
@@TheFlyingMechanicDIY how can I send message on this?
@TheFlyingMechanicDIY
5 жыл бұрын
Arie Tan i will be sitting up a public email and instagram page very soon, until then, you can use the forum saabcentral.com where you can register and ask these questions, i will be available there with a bunch of other experts to answer any of your questions, the forum has private messaging capability as well. Good luck
@uneekpcs8 ай бұрын
Because noone guessed, I guess the plastic clips broke off?. Btw can you easily add electric folding mirrors to a saab without them?
@TheFlyingMechanicDIY
8 ай бұрын
I guess u check the wiring harness to the mirror if it has the extra wires for it, if it has then u will need the buttons, the mirrors and some programming..
@nataliakomunska64793 жыл бұрын
Hi. I'm gonna repaint this black "triangle" part that's attaching mirror to the car and I saw you left the metal part of your old mirror. Is it possible to also remove it?
@kevineg5
3 жыл бұрын
Sadly no. They are machined together
@synthostyle3 жыл бұрын
I have also the same issue with my car. How did you know which mirror engine was faulty? On my Saab 9-3 2010 Sportcombi TTiD when I press the folding button nothing happens even if the car is equipped with folding door mirrors.
@TheFlyingMechanicDIY
3 жыл бұрын
I dont think the mirrors are the issue, its probably the button or the driver door module . U will need a tech2 to figure that out .
@synthostyle
3 жыл бұрын
@@TheFlyingMechanicDIY Ok, is the driver door module situated in the door? The button for the tilting for passenger side works. Will there be any failure code related to this? I have A SID2 in the OBDII outlet that can read failure codes.
@TheFlyingMechanicDIY
3 жыл бұрын
Alexander Wänerberger the driver door module is the window buttons panel actually, i dont know if eSid will get those types of B codes, but sure tech2 will .
@synthostyle
3 жыл бұрын
@@TheFlyingMechanicDIY I removed the switch unit/controller for the side mirror on the A pillar on the driver door. Behind it you could see the connectors to the side mirror. I see a black and a grey connector. The grey connector is the one for auto dimming and the folding function. For the Auto dimming there is a Yellow/white in inlet 1 and a yellow/black wire inlet 2. The wire for folding the mirror there is a Blue/violet wire in inlet 10 and there should be a Yellow/grey in inlet 8. What I could see was that the yellow/grey wire but it is not connect of some cause. I don't know for the moment how the passenger side looks like since there is no inspection hole on that side. I guess the someone have disconnected it I hope there is a crimp on it.
@synthostyle
2 жыл бұрын
The issue was one of the wires on each side was removed from the grey connector. I have the function now but my left side mirror housing will not stop in correct position when unfoldning.
@roger89135 жыл бұрын
what is the year model of the car? where can i buy this mirror? thank you!
@TheFlyingMechanicDIY
5 жыл бұрын
Its a 2008 .. where are you located ?
@roger8913
5 жыл бұрын
@@TheFlyingMechanicDIY i have 2008 9-3 too, but does not have folding mirrors. im in canada
@TheFlyingMechanicDIY
5 жыл бұрын
xBall99 i would say junkyards are ur best bet .. whats wrong with the old one ?
@emrediril83515 жыл бұрын
Katlanmayı sağlayan motoru sökebilir miyiz?
@TheFlyingMechanicDIY
5 жыл бұрын
Im sorry, but English please
@emrediril8351
5 жыл бұрын
@@TheFlyingMechanicDIY sorry. :) Can we remove the folding motor?
@TheFlyingMechanicDIY
5 жыл бұрын
Emre Diril unfortunately you cannot, the motor is built-in to the metal frame of the motor, to remove it you may have to destroy the mirror.
@emrediril8351
5 жыл бұрын
@@TheFlyingMechanicDIY thank you...
@GordonBenny Жыл бұрын
How do you "fold" a piece of glass. The motor tilts the glass in various directions. You can not do Origami with glass. ROFLMAO 🤣🤣🤣🤣
Пікірлер: 37
thank you!
Thank you. Very useful.
One big question, why do you remove the whole door panel if that isn't necessary? Thank you.
Do you think it is possible to remove the backcover (silver part) without removing the whole mirror? Want to repaint it.
@TheFlyingMechanicDIY
4 жыл бұрын
Yes u can, remove the glass, while the mirror is attached and u should have enough access to release the taps (u will have to move the mirror between fold and unfold position)
Great video!As well, i have an issue about the folding operation.Actually there is no operation when i push the folding button, but i am hearing the silenoid motor turning (without folding mirror) for a few seconds!I suppose that the damage is comming from the spring that holds the mirror over the silenoid motor.Could you make a video, how to disassemble by secure, the mirror?In that case we should see the spring, so by a screw driver, we can turn it to the rigth direction and solve the issue.It' s a very common problem for SAAB 9-3 MY 2003-2007.Thank you.
@georgekolotouros9176
3 жыл бұрын
Καλησπέρα . Εχω ακριβώς το ίδιο πρόβλημα σε SAAB 9-3 μονέλο 2005 . Εχεις βρει λύση ?
@STAMATAKISM
3 жыл бұрын
@@georgekolotouros9176 καλησπερα.Το προβλημα ειναι μαλλον, στο ελατηριο επαναφορας.Θελει λιγο κουνημα για να ερθει στην θεση του, αλλα για να γινει αυτο πρεπει να δουμε πως θα ανοιξουμε τον καθρεπτη, χωρις να κανουμε καποια ζημια.
@georgekolotouros9176
3 жыл бұрын
@@STAMATAKISM Kαλημέρα. Εχω μιλήσει με αντιπροσωπεία ,με δύο συνεργεία saab , αλλά και με τον marcus kzread.info/dash/bejne/dp6kzqOMaKSZdbg.html και η απάντηση ηταν μόνο αλλαγη καθρέπτη .
@STAMATAKISM
2 жыл бұрын
@@georgekolotouros9176 φιλε μου μετα απο καιρο σου απανταω σχετικα με αντιπροσωπεια και Marcus.ΚΑΝΕΝΑΣ δεν σου λεει πως να επισκευασεις!Μονο να αλλαξεις!Σιγουρα κατι πρεπει να γινεται με την επισκευη.Τι δηλαδη, πρεπει ν' αγορασουμε ολοκληρο καθρεπτη;Πιστευω πως ο flying mechanic κατι θα μας δωσει.Τα ιδια λενε και για τις κλειδαριες.Αν δεις το αντιστοιχο βιντεο του, πως επισκευαζονται, θα εκπλαγεις!Εγω ηδη επισκευασα του συνοδηγου.Ειναι μεγαλος μαστορας!
How did you get the damn control panel out? Did you just wedge it with the screwdriver?
@TheFlyingMechanicDIY
4 жыл бұрын
Saab Rider , if u mean the mirror control panel, then yes after removal of the door inner panel it just pulls out
on an 06 SC US model someone told me to get the door harness loom from an 03? and do you mind letting me know the part numbers for the switch controller?
@TheFlyingMechanicDIY
5 жыл бұрын
Im sorry, but to provide accurate information you will have to provide me with VIN number which i don’t recommend posting it to the public ..
@lovediecastdetails2269
5 жыл бұрын
@@TheFlyingMechanicDIY how can I send message on this?
@TheFlyingMechanicDIY
5 жыл бұрын
Arie Tan i will be sitting up a public email and instagram page very soon, until then, you can use the forum saabcentral.com where you can register and ask these questions, i will be available there with a bunch of other experts to answer any of your questions, the forum has private messaging capability as well. Good luck
Because noone guessed, I guess the plastic clips broke off?. Btw can you easily add electric folding mirrors to a saab without them?
@TheFlyingMechanicDIY
8 ай бұрын
I guess u check the wiring harness to the mirror if it has the extra wires for it, if it has then u will need the buttons, the mirrors and some programming..
Hi. I'm gonna repaint this black "triangle" part that's attaching mirror to the car and I saw you left the metal part of your old mirror. Is it possible to also remove it?
@kevineg5
3 жыл бұрын
Sadly no. They are machined together
I have also the same issue with my car. How did you know which mirror engine was faulty? On my Saab 9-3 2010 Sportcombi TTiD when I press the folding button nothing happens even if the car is equipped with folding door mirrors.
@TheFlyingMechanicDIY
3 жыл бұрын
I dont think the mirrors are the issue, its probably the button or the driver door module . U will need a tech2 to figure that out .
@synthostyle
3 жыл бұрын
@@TheFlyingMechanicDIY Ok, is the driver door module situated in the door? The button for the tilting for passenger side works. Will there be any failure code related to this? I have A SID2 in the OBDII outlet that can read failure codes.
@TheFlyingMechanicDIY
3 жыл бұрын
Alexander Wänerberger the driver door module is the window buttons panel actually, i dont know if eSid will get those types of B codes, but sure tech2 will .
@synthostyle
3 жыл бұрын
@@TheFlyingMechanicDIY I removed the switch unit/controller for the side mirror on the A pillar on the driver door. Behind it you could see the connectors to the side mirror. I see a black and a grey connector. The grey connector is the one for auto dimming and the folding function. For the Auto dimming there is a Yellow/white in inlet 1 and a yellow/black wire inlet 2. The wire for folding the mirror there is a Blue/violet wire in inlet 10 and there should be a Yellow/grey in inlet 8. What I could see was that the yellow/grey wire but it is not connect of some cause. I don't know for the moment how the passenger side looks like since there is no inspection hole on that side. I guess the someone have disconnected it I hope there is a crimp on it.
@synthostyle
2 жыл бұрын
The issue was one of the wires on each side was removed from the grey connector. I have the function now but my left side mirror housing will not stop in correct position when unfoldning.
what is the year model of the car? where can i buy this mirror? thank you!
@TheFlyingMechanicDIY
5 жыл бұрын
Its a 2008 .. where are you located ?
@roger8913
5 жыл бұрын
@@TheFlyingMechanicDIY i have 2008 9-3 too, but does not have folding mirrors. im in canada
@TheFlyingMechanicDIY
5 жыл бұрын
xBall99 i would say junkyards are ur best bet .. whats wrong with the old one ?
Katlanmayı sağlayan motoru sökebilir miyiz?
@TheFlyingMechanicDIY
5 жыл бұрын
Im sorry, but English please
@emrediril8351
5 жыл бұрын
@@TheFlyingMechanicDIY sorry. :) Can we remove the folding motor?
@TheFlyingMechanicDIY
5 жыл бұрын
Emre Diril unfortunately you cannot, the motor is built-in to the metal frame of the motor, to remove it you may have to destroy the mirror.
@emrediril8351
5 жыл бұрын
@@TheFlyingMechanicDIY thank you...
How do you "fold" a piece of glass. The motor tilts the glass in various directions. You can not do Origami with glass. ROFLMAO 🤣🤣🤣🤣
Thank you. Very useful.