You should have put some locking casters on your table so that you can move it around more easily. You probably would want to move it out to the center of the stall to use it.

@BradMore

Жыл бұрын

Version 2.0

@freekimsurr

Жыл бұрын

TRENTS NOT STUPID....IM SURE HE WILL MOVE IT WHERE HE NEEDS IT WHEN HE WORKS ON THAT TRUCK. U MUST NOT WATCH TRENT N ALLIE.....BECAUSE IF U DID...U WOULD KNOW THAT THEY BOTH ARE PRETTY SMART!!!!! JS

@kennethweaks7973

Жыл бұрын

This is what I came to reply … And btw it doesn’t have anything to do with T & A being “stupid” It was just an observation … Those tables are very heavy … Table looks good and sturdy to me … Great job

@charlene5461

Жыл бұрын

Perfect time for reflection... Take a deep breath...everyone can use a litte advice and suggestions, the good thing about them both is you can take them or leave them, meaning not use them. And if I know Trent and Brandon, they more than likely have something better planned for the uses they will apply this table for but sure they appreciate all ideas...you never know when someones will be of help.

@charlene5461

Жыл бұрын

@@freekimsurr Hope you have a wonderful day. Rainy here and perfect reason to stay in jogging pants and watch football!! Dallas fan here, hubby a Carolina fan. Have an amazing day and week😀

Trent do you know why we all love you??? Well your humility ...and your honesty. Brandon is the icing on the cake.

Brandon is the best. You are blessed to have him as a friend.

Supporting Trent Brandon you are a Knight of the Welding Table. Cheers

Trent & Branden make an awesome team in all of the work that they do.

@roberta4989

Жыл бұрын

Art, not only is your comment very true, you are one of the few that spells Branden's name correctly. It's nice to see someone here paying attention. 😃

@51-FS

Жыл бұрын

@@roberta4989 didn't realize this was a spelling class. I don't recall them teaching us how to spell Brandon's name?

@roberta4989

Жыл бұрын

@@51-FS Well Joa "Karen" Drike, please refer to my "paying attention" comment. Are you Joey or Joel or Job or Jimmy, Jim, Jasper, Jake or just plain Jerk? Or do you prefer Karen?

@51-FS

Жыл бұрын

@roberta4989 I'm just s jerk. But at least I will admit it

@lisatingley8953

Жыл бұрын

Trent, you remind me of my brother-in-law. Jack of all trades. If he doesn’t know how, he figures it out with books or you tube. He became a pilot of a helicopter, bought an older 60’ish helicopter, used it to get his hours. Turned around an sold it. So it really only cost the gas and time. He then got a promotion at work (LE) became the top man that gave final tests throughout the state for others that flew for our department. He just has a mind like yours. Love your family and Brandon 😊👍

Glad to see Brandon taking on some of the filming to give Allie a little more time back for editing a third weekly video! 👍🏼😎

I’m a 65 year old, old lady and I have really enjoyed your page so far😊

@CindyMac4104

Жыл бұрын

Me too!

Brandon the Man... I'm loving this content.

I know absolutely zero about most of the things that you do, but it's so much fun to learn how to build, wire, plumb, and weld by watching you. I had no idea how to purchase steel; I had no idea that there were shops that sold it. Thanks for showing us how to do so much.

My dad was a welding instructor. If he were with us today, he would say, “great job young man”.

@jacquejecker4435

Жыл бұрын

I agree. I am no welder, but I have seen a lot of welding in these videos and this is excellent looking welding.

Good to see Brandon he hast to be part of Trent’s garage, It wouldn’t be complete without him.

I love the scenic shoots you intersperse throughout your videos. Love love love. It's insanely beautiful there.

86 year old lady, and love watching you, where did you learn all what you do BUILDGING YOUR HOME NOW A TRUCK.

I'm so glad that you can do what you want for a living.

Really enjoying this channel as well as Trent and Allie. Watching you and Brandon working together at Trent's Garage is great.

Trent, you have a great friend in Brandon . to join you in all things you come up with.

@Trents.garage

Жыл бұрын

What are friends For?

Tip: Add some tubing under the surface. If you put a heavy gearbox or other heavy part on it, it might sag and break your leg welds.

@matthoward923

Жыл бұрын

Add some 3” channel in an X under the table plate to keep it from warping

I couldn’t comment earlier. I had a thought that you could add casters to the table to make it easier to move around as you use it. I love seeing Brandon behind the camera. Multi-talented guy!

@rickiovine2170

Жыл бұрын

Locking and unlocking casters each time you move a heavy duty work table is unreliable. I would much rather have it right where Trent has his: with a wall backing. Space to maneuver for clamping is easy enough because he can slide the table out a few feet without difficulty. Stability is an absolute on a heavy metal table that will be used for welding often times large, awkward objects.

Like both channels very much from South AFrica

So glad too see Brandon is helping with you on this channel.. I’m so happy for you I wish I could get my channel as many likes that you have.. I need too borrow Allie to show how too video my videos .

Trent , Its great to see Alley filming,that means twice as many videos coming from you. Great table project, Iam waiting to see more, Hug Frank the dog for us.

Every man needs a welding table especially if you like welding or if your working on your truck yourself it helps out a lot to have a welding table..

I really think your welding table, is a very good idea. Your welds look amazing.

Stacking dimes, Trent great welding. You guys make a great team.

You just made the best engine table I ever did see . Drop it on that baby. Je

It’s the Trent. !! 😎🤷‍♂️👍

@JudithBisson

Жыл бұрын

Lmao 🤪

Oh wow! metal can be heavy for sure, and I think that you did a good job fabricating it. I think it needs some wheels or something to make it a lot easier to move around since it is so heavy. I am excited to see the truck get worked on. Thanks for a great video to watch have a great day, sending love and hugs, bye! 😂👋👍💜💜💜

YAY! Great video, interesting table (needs casters) it is great to get to see this from the beginning with you and Brandon and Allie getting the shop setup. Keep the videos coming

So with everything else you, now your are filming Trent’s garage. Allie you ROCK!!!!

Great Brandon back. Love the three of you.

Been with youse guys since you started building the house. Now as a car guy looking forward to this channel. "Flatheads forever" Gramps

Locking casters and a strong healthy vice are a must 👍

I agree with the casters. You did a really good job of welding. Keep up the really good work

I built one of those about 25 years ago. I started with 3/4" x4'x8' steel plate. Used 3"x3" x 1/4" square tubing for the legs and structure. I cut off 10" off the 8' side folded it up 90 degrees and welded it to the table as a backsplash. I then welded some 1"x1" square tube to the backsplash and bolted a 3/4" piece of plywood. Painted the plywood white to do a shadow board and painted the whole table gray except the top face. Bolted down a big vise to the left side. Then a two stone grinder on the right. Then mounted two switches one for the lights and the other for the grinder and two plug receptacle. Then welded on some heavy duty steel casters on to make it easier to move. It has stood up great and is like new after 25 years of fabricating.

@Trents.garage

Жыл бұрын

That’s awesome!!!

I really enjoyed that! Can't wait for more fun!

Nice weld beads Trent ...for future reference ,worry more about the millscale than anything else . You can lay the best bead in the world but if you don't grind off the scale they will be weak ... On a side note ....please make your build videos longer 😊😊

@Trents.garage

Жыл бұрын

😎🤘🏼 thanks man! The mill scale did contaminate some of the welds and I had to redo them haha

@annelowry357

Жыл бұрын

What’s millscale?

@greyfyreshelties260

Жыл бұрын

@@annelowry357 Mill scale is flaking on the surface of the metal after it is formed in the mill. "during welding, mill scale hinders the flow of the liquid weld pool, often causing an undesirable weld appearance or contour. Mill scale also can impede penetration into the base material and cause a lack of fusion and weld inclusions"

@annelowry357

Жыл бұрын

@@greyfyreshelties260 thank you.

@rvhome5599

Жыл бұрын

I used to Farm and did tons of welding with a mig, I always grinded my welds clean before I layer down the weld , just works so much better. You figure it out as you go along, practice makes perfect

Those are some decent looking welds!

@Trents.garage

Жыл бұрын

Thanks

Good to see Brandon helping you out.

I don't know the answer to the quiz question, but my hubby does it within seconds... lol! He's a journeyman ironworker/rigger. He said the steel sheet weighs 528#'s and that steel weighs 44 #s per square foot. Then he broke down the math to me.... lol! He's so darn smart.... lol! So love this channel to Trent. 😍

casters are a good idea, especially in a small shop . the ability to roll the table outside to weld is important. now Trent is welding cutting and grinding against a wood wall.

Happy to see Brandon here . . I mean how could you not?! 🤔💁🏻‍♂️😄

Casters are Definitely the way to go.

Trent - Aside from what you've said, the fact that it sits flat, is great. As well, I built a worktable similar about 30 years ago, and I might wipe it down with an oily rag every 5 years, and still, no rust. As well, a hint to the wise, take a grinder and round off those sharp corners on the top plate. Your hips, and Leo's head, will probably thank you for that.

You're doing awesome Trent, please don't doubt yourself or take criticism to heart. Great job!! Yay love seeing Brandon helping he is doing wonderful job. You both deserve a big oat on the back...wooooo high 5! Sending Loves and pat on back to you all!! ❤️ Be safe, from your fan in Vancouver BC ❤️💋🇨🇦

Think 🤔 U DONE A GOOD JOB OF THE TABLE TRENT, DONE A BIT OF WELDING MYSELF BACK IN THE DAY,

OK...OK, welding table covered...just need that C&C Plasma cutting table, and your all set! :)

Nice beads man! 👍🏼

I love everything you do and show. It is about you folks and what you do. Love all the different things that I get to see when Alli does the editing and music for each episode.

In my opinion, excellent job

Nice job on the table! Always good to see Brandon...he is so amazing! (Jane)

Wow! I criticize what you do as a home builder but your fab/welding is really skillful! I'll admit I'm jealous of your welder and your welding skills. Props to you.

Trent has unexpected mad welding skills. silky smooth joints brother

Yaaaaas more Brandon too!!

Love that you were so safe during the welding!! And Brandon- great camera work! 👏🏻👏🏻👏🏻 table turned out awesome!

Al need a garage!!! I love the Golf room coming. But!!! Happy wife???? Hello??? 😂🤣😂🤣👍🏻👍🏻😎😎😎

That was a beautiful bead, now let’s see that “Frankenstein” one😂

@Trents.garage

Жыл бұрын

There were some that got contaminated and didn’t looks so good haha

Flap discs never used to be a thing years back but that seems to be one of the popular items used for years now to clean up mill scale on hot rolled steel without removing or gouging into the metal as much as a typical grinding wheel would do. As soon as I saw you pull out the rag I was going no no no in my head LOL,. first mechanically remove the mill scale, then use the acetone if you really feel the need and I think in most cases with thicker steel that is not a requirement, definitely a different story with aluminum as that is a whole other beast. Oh and using a wire wheel on an angle grinder to clean mill scale, that typically will not take it off, you think you have but its still there to some degree. What is nice is to have multiple angle grinders when one is using a combination of a grinding wheel, flap disc, cut off wheel and rather than change out constantly between wheels for each phase of a project, they are all ready to go. That is the drawback of mig, it hates mill scale where as depending on the rod doing stick welding, one can get away with less prep. Of course everything else is a negative with stick as per having to deal with slag removal, slag inclusions if the technique is not correct ... mig sure shines then !. Great job on the welding table though ( aside from the cleaning learning curve you experienced without me having to babble all of this ). With that table depending on your plans, chances are you will probably want to mount on a vice and incorporate the underside stiffeners as was suggested to beef up the table top stiffness at that time. Nice project you can be proud of and will get lots of use I am sure !

Trent the er so cool 👍👊

T & A, I didn't know if I was going to enjoy this new channel of yours, but I love it! It is never boring and you always explain what you are doing. I am happy that you let Allie and Brandon in it too! I have to say, I can not lie, that your leg welds looked mighty good to me! You know what you are doing, but the "Armchair Quarterbacks" are going to feel like they need to put their two cents in too! ha The only negative is that the video went by so fast and I didn't want it to end! lol Love you guys!

Wow Trent! You can weld! Those beads look amazing!

@Trents.garage

Жыл бұрын

Thank you 😊

Those are awesome welds! Nice and smoooooth!

It’s looking good it’s looking good the best part I like about this is I get to watch you more often during the week you are such a good channel to watch your humorous and your good people and all the above and it looks like the snow is starting to melt up there but Then again maybe not did hear that you guys are getting all kinds of snow as I have some friends that live not too far away from you guys not that I know where you live as I really don’t but I know they say ski a lot so can’t wait until tomorrow Monday to watch another good episode of you guys

I love the new show, Trent ♥️

By the way good luck with all the snow. I guess you could put a bucket on the front of your tractor and dig your house out. Allie is a real trooper shoveling all that snow.

Your table looks beautiful.🙃🙂🤩🥰🤗😉😉😉😉😉😍

@Trents.garage

Жыл бұрын

Thank you

Doing great. It’s good that you introduce Brandon to this video I have followed you from just before Covid all I can say is good one guys and you are never short o a surprise in store. Take care see you on the next one.

So happy to see Brandon. You two , along with Allie, make the best team.

Here we go again..Trent Garage. Sunday has a new collor..thanks for share Trent 🙌❤️

Oh oh I have a suggestion for when you buy more metal sheets! You know those felt furniture slides you put under your couch to move around the room? Get some, throw them down in the bed of the truck before the forklift drops a sheet in. It will let you slide out the sheets easier. Also - hair out of square is okay as long as it's functional for your needs.

Welding is no joke. When I was young, I worked for Brandon & Turnage Race Cars. Among other things, we balanced engines. When DOING this we had to use a TIG welder. Since the welds were, sometimes, close to bearing surfaces, it was important to be careful where to touch the welding wire. One HAS to use a super-dark welding hood. One time I had a very difficult place to weld in and started the welding wire, THEN flipped the hood down. Woke up in the middle of the night with my eyes on fire. Like hot ground glass was in them. I had flash-burned my eyes. The hospital said that I also had some damage to my retinas.

What an absolute joy to watch you and Brandon working together and what a magnificent job on the table Trent 🥰 I would add locking wheels to it

Great little welder, I love it, purdy bead also. I welded direct fit converters for 9 years, I worked in a very large muffler factory. Great looking table also.

@Trents.garage

Жыл бұрын

Thank you

Those are some damn fine welds, Trent.

Outstanding table awesome fun ❤😊

Awesome table for you are welding table.

🇬🇧 Trent Over time your top will bow. Without support.

@Trents.garage

Жыл бұрын

You’re right! I need to add some framing underneath

@fredblogs

Жыл бұрын

@@Trents.garage Go for It, your making a fantastic work area.

Let's see that big shop vise

Boop... looks like fun times ahead!

Trent your skills are truly impressive. Great table. I know nothing about welding or rebuilding cars-but I’m totally enjoying Trent’s Garage because I get to see you, Brandon, and Allie. And learn new things. 😊 I love your logo, love to you all 💕

What a shock, he actually did nice weld! Good going! Yes, video short, hahaha

Great work on the welding bench!

Nice plate, Trent, if I'm not wrong, that should weight around 220,5 kg. A nice, nice patch. For welding table will be perfect, also to do some metal work. If I was you, I would include on one side a removable sheet folding assembly (rigorously homemade) for projects like bodywork and fabrication. Cheers, waiting to see some building stuff. 😉

Trent your welds are awesome good... you've had some practice at welding. Nicely done!

Great idea for your table and damn that looked heavy. Loved the "Hair out of square" comment, made me laugh.

The table looks great

36k subs in two weeks that's awesome

Looks good, Trent.👍😊💕❤🙏.

If you no what steel weights by the square foot it’s easy to figure out!! It’s about 480lbs to 500lbs for a 4’x8’ sheet 3/8” thick!! I always do a +&- of 10lbs to be safe!!! I had half of a flat bed truck and that Is what I am making my fab table out of for my shop!! It was free and I definitely needed a metal Fab table with a bench vise on it also!!!

Trent! You are so talented!

Your wreath on your door looks good with the real snow on it.oh I forgot this is a man's garage & truck build channel 😄 Grrr let's throw some steel around men roar roar grunt grunt 🤣😂

Yay! Brandon makes his Trent’s garage debut! Awwww!!! I love seeing Frank and Lika playing too! I am a devout Trent and Allie follower from back when you guys were on your South American tour. While I’m not super into the car stuff I am happy to support you guys and enjoy learning new things. :)

Wow, Trent. Those are some nice welds!

Cool table nice build I do the majority of the welding a my work. Can’t wait to see what you have in store for us

Thank you for letting us see such an exciting project, most people buy a welding table but here it is built by themselves. Thanks for that. Greetings from Germany

I’m really excited about this channel. I hope you stick with it even after all the folks who have subbed that have zero interest end up ignoring these videos. As a fellow off-road enthusiast, I can’t wait to see where this all goes!

@Trents.garage

Жыл бұрын

I’m here to make it work!!! Share it with your firends!

@charlene5461

Жыл бұрын

@@Trents.garage Lol! There are women in their 70's watching Trent and Brandon and enjoy it, I feel because they know him and Brandon as husbands, fathers, sons, brothers and grandsons. It's their bubbly personalities, Brandon is finally getting over his camera shyness, very well, I might add and doing a great job just being himself! We're here for the families, watching a rock crawler get built is icing on the cake!!😄😉😃😊 Anyways, if how many words help out with algorithms, there you go friends!🤷🙋 Have a great week!! Hugs for Allie and Leo!!

@rvhome5599

Жыл бұрын

We happen to love both channels, don’t let the negative Nancy’s get to you , good job both of you

@51-FS

Жыл бұрын

I'm here for the man stuff....

WOW nice clean welds! Very Nice indeed!

@Trents.garage

Жыл бұрын

Thank you

Great job, you’ve still got it!

TRENT YOUR PREVIOUS SNOW HAS FOUND ME HERE IN IOWA

Nice table. You're stacking some nice dimes on those welds! good job!

@Trents.garage

Жыл бұрын

Thank you!!!

It would be nice at the end of your videos to say and I would really like to thank Brandon for getting up here in this treacherous weather to help me!! Just sayin. It going to be great watching you rebuild your rock crawler

@mtnlovr8936

Жыл бұрын

You won't hear it