Fabricating a custom quarter panel on our E30 M3 project car!
Автокөліктер мен көлік құралдары
Welcome back to another episode! We replace the rear panel on our E30 M3 Build. And also reinforce the inner structure!
Motorhead.co | Instagram
Be sure to check out @VasilyBuilds
Пікірлер: 155
The only thing here better than the content is the brotherhood. 💪💪
Some day you guys should surprise ya dad by cleaning and Organizing the shop.....
Motorhead.co and VTuned are the best car rebuildings video on KZread !!!! Nice to see the BMW back again and that car is going to be amazing !!!
@Mtech_garage
3 жыл бұрын
💯💯
I’m telling you guys I NEVER LOSE INTEREST IN ANY OF YOUR VIDEOS!!!!! Your work is impeccable!!!!!👍👍👍
@Mtech_garage
3 жыл бұрын
Love to hear that!
Did you consider weld thru primer and cavity wax? Worried you may have a rust trap on your hands. Take that foam out and slap anyone who considers leaning on the car. Metal fabrication looks nice Yuri! 👍
E30 coming along. Fabrication on point as always!
Brothers in arm's, you are rocking this build. Another Great video thank you guy's
Great wk Yuri & Mark, it turn out really nice,look forwards to the next one
Coming along nicely yuri is getting so good on welding
Good to see you are finally wearing eye protection. They make you look so professional. I hope you didn't have a close encounter that put you over the edge into taking you eye protection seriously. Now its time to get your brothers to do the same! CONGRATULATIONS
Some mad "old school" metal skills brought to you by 2 young men. Yuri your metal skills are amazing. Thanks for this latest video Mark...
Good travel video interspersed with some great TIG welding by Yuri. Now at least some semblance of rigidity has now been reintroduced since the outer wheel arches were removed. However what has been created is two strong box sections either side of the rear wheel only longitudinally linked by the introduction of the top angle iron. I believe there needs to be a mid line cross brace. Also the mass of styrofoam introduced might not act as a very good fire retardant. Just saying. I am never the less really looking forward to seeing how the fibreglass panels fit and blend in. Your enthusiasm is also super brilliant guys!
The attention to detail and structure you guys take is outstanding. Never lose that. It's been wonderful watching all of you grow together in your skills and presentation as the channel has progressed.
@Mtech_garage
3 жыл бұрын
Thanks!
Loving this build, E30s are the best Beemers! Had my own back in the eighties, (my kids called it “Hyperthrust” ) - stay safe boys and remember to help your Dad out sometimes! You have all of this because of your parents hard work! 😊👍
I noticed that your grinders have the guards removed, I guess it's because you work in tight corners. Look after yourselves guys, but I see Yuri wears a helmet when grinding, good idea! Those welds look beautiful and that's a class act. Nice work guys.
Great job guys! Yuri , you are the man for awesome body work !
Excellent display of engineering, design and craftsmanship by everyone. Great video and great project. I am really learning a lot. Like your use of "CAD"!
Great video I always enjoy them. its good to see local boys be successful we all love car projects. keep up the good work.
Fabrication and finishing skills are leveling up all the time. Awesome to see
Good job Gentlemen. Nice fabrication skills.
I enjoy watching you guys building my dream car E30 M///3 is unique car that ever made
This build is really coming together, I had my doubts about the structure but it looks like you have built it back in. Great job!
@Mtech_garage
3 жыл бұрын
Yessir 💯
Yuri's fabrication work is really amazing. Love your videos guys!
That is a great wide body kit and the right folks are "doing" it! None of this janky cut the fender lip and twist the wheel liner to close it! It's almost a shame so much of the work will be covered up! The plumbing that was my "day job" was like that too- and skimping on the support work was a fast road to a bad job. I think Yuri is back, too! Good to Vasily in the house- his insane lawn mower will be a treat! FR
Absolutely loving this build guys. Some proper skills there dudes. Nice to see the job being done properly 👍
Don't forget to go sign the RPM Act save our Motorsports save our race cars save the aftermarket performance industry much love everyone
Very nice work
Could watch this all day long! Cheers guys.. Great work!! 👍
@Mtech_garage
3 жыл бұрын
🙏🏻👏🏻
Fabulous work guys 👍
Like the man said that is a big turbo on that car. Looking real good guys you never cease to amaze me with the amount of talent you have. All your projects are looking super sweet. Can't wait to see that M3 E30 ripping it down the road keep up the good content and as usual I look forward to every video
Would be great to see the Honda, BMW and the Ford go on a Road trip with Vtuned's M5 or McLaren... Or, with Vtuned's Mustang once it is ready...
This one is going to be awesome! Thanks for the saw
@Mtech_garage
3 жыл бұрын
🙏🏻💯
Great work on quater panels. Coming along nicely
Ya just had to start Big Red..sends chills down my spine..now back to the build, when you don't have a spot welder..call Yuri..great creativity and collaboration! Perogies on me..
@Mtech_garage
3 жыл бұрын
Bet 👊🏻
That was a great intro... glad to see the car starting to take shape... PEACE :)
Another Brilliant video 🇬🇧
Finished this project
Just brilliant.
Salut les amis merci pour cette vidéo c’est toujours un plaisir de vous regarder faire merci et bon courage 👍🙏👍😉😎
I just finished painting my M3 E30 😁
M3 conversation is looking 👌🏻, well done guys
amazing family . greetings from North Africa, Libya
@Mtech_garage
3 жыл бұрын
😊😊
great work i am impressed with the welding
Awesome work!
Awesome job
Awesome job, guys!
Amazing family
Beautiful!
I love how that tail-light panel looks 👍This fabrication is so next-level, all-pro work, all the time. The E30 is really coming together! Surprise visit from the “Master of the 2-Stroke” @Vasilybuilds. Can’t wait to see the next video 😎
@Mtech_garage
3 жыл бұрын
💯💯
The Boss' now in 4K, keep it coming fellas.
@Mtech_garage
3 жыл бұрын
💯
Fantastic work. Well done.
Have you ever got a different answer from your dad, asking him what he's doing? Such a cool family! Greetings from Germany
@Mtech_garage
3 жыл бұрын
Nope always working 😂
Always awesome guys love the video thanks to the 3 of you
Looking great.... getting there... really looking fw to seeing it go to the paint shop!
I like the build but I think an S52/m52 engine would suit it better tbh apart from that it's sick
Loving the build lads.. I honestly think you guys could have replicate the m3 kit out of steel, definitely have the fabrication skills
You guys do a superb job, absolutely great to watch, can’t wait for the next instalment 👍👍👍👍👍👍👍👍👍
@Mtech_garage
3 жыл бұрын
Thank you
Looking good
Fargen dat Yuri is a gun mate, well done, mad skills Yuri!
Glad to see y’all making some progress on bmw, more content,more subscribers.just keep doing what your doing 😎😎😎👍👍👍
Great job fellas!!
Great job!
Once you cut the foam top surface off it will start absorbing moisture.
very nice fabrication skills
@richardsuffolk9059
3 жыл бұрын
You guys are on fire
Really loke the Intro guys.Awesome work on the reinforcements.That's solid !
Man it's looking great guys, nice job!!!
You are doing amazing work guys, what r u doing p0p? Working 😂, that Yuries welding googles 😂, the details in the quarter panel fabricating is amazing, keep it up.
O my goodness you guys are the business man....well done.
great scott strong
incredible skill, greetings from Brazil !!!!
S2000 is very nice
Great vid. Nice job
This time I have nothing to say but ......Thanx and a Big,Big like.....🚗🚗🚗🚗👍👍👍
This is my favourite build. can't to see it finished.
amazing content as always guys, cant wait too see you guys hit 100k and then 1M!!! Much love from Brazil
👌👌👌
You should’ve gotten 85-87 e30 to save that tail light work
cool
I really love you work keep up the good work lads
Nice work 🇺🇸
Finally let's go young men.
Awesome
This is insane. 👌
keep the e30 content coming!
😀👍
That's pretty mad that you can just comfortably use your cardboard cut-out template directly next to the intense heat of that cutting torch!! How cool is that??
I’ll watch an entire episode of you guys driving to the steel store on big red
is not the german way but you do your thing ^^ hi from Berlin, Germany
Brilliant series loving the car build, wouldn't it make more sense to buy more cutting wheels and everything rather than making loads of trips to the store? Keep up the good work
Awesome video on KZread today
S2K looks great, greeting from France :)
💥
Yuri did a amazing welding and that kcturbo sounds amazing Great work bro's ☺☺☺😊😊
@Mtech_garage
3 жыл бұрын
Thanks brother 🤌🏻
@shivasewnath6086
3 жыл бұрын
@@Mtech_garage you welcome brother ☺☺☺
Nice job boys! Greetings from Poland. ;)
Fan from Haiti
I got my pre facelift tail panel the other day and have the old one cut out. So I’m literally in my garage now doing the same thing except my car is the early e30 and yours isn’t. Too bad I don’t have the skills all you guys do, but I’m learning lol.
pancer continue, heavy armored as well back as in front....
You dudes are nutty. This is very nice.
Think it will look amazing when you finish it but would have been sooooooo much easier if you’d have used the correct car
Looks cool do blue, so 2021 will be blue year, as 2020 was red one XD