Dynojet Power Commander V: Adding Devices (AutoTune, Ignition Module, Secondary Fuel Module)

Автокөліктер мен көлік құралдары

Learn how to add accessories of the Dynojet Power Commander V, including Ignition Module, Secondary Fuel Module, AutoTune, LCD screen or all of them at once! www.dynojet.com/power-commander
We show you how to connect the devices correctly using your CAN cables as well as how to add the devices to your Power Commander V (PCV) network and make sure they are all updated with the correct firmware.
For more inspiration and knowledge on maximizing your Power Sports experience, check out our blog: www.dynojet.com/blog
For more support related articles and videos, please visit our Help Center: dynojet.zendesk.com/hc/en-us
Subscribe to our channel: kzread.info...
Instagram: / dynojetresearch
Facebook: / dynojetresearch

Пікірлер: 49

  • @outdoorzone
    @outdoorzone3 жыл бұрын

    FYI........CAN termination plugs are now built into every unit with a serial number that ends in 1510 or higher, per dynojet when I contacted them on 8-25-20!

  • @gtrman9706
    @gtrman97068 жыл бұрын

    Thanks Chris,very helpful !

  • @akphoto2010
    @akphoto201010 жыл бұрын

    Where the hell Im going to put all that things in my bike!!! You must change that!

  • @outdoorzone
    @outdoorzone3 жыл бұрын

    Excellent info!!! I’m fixing to add your auto tune to my PCV on my wildcat xx! Thanks!!!

  • @DynojetResearch

    @DynojetResearch

    3 жыл бұрын

    You are welcome! Enjoy!

  • @alexanderzayas8213
    @alexanderzayas82134 жыл бұрын

    Awesome video I’m watching this 7 years later and was a big help understanding!

  • @DynojetResearch

    @DynojetResearch

    4 жыл бұрын

    Thank you, Alexander! Happy this helped.

  • @allangosling6134
    @allangosling6134 Жыл бұрын

    Thank you Chris for the information. I have 2003 Sereamin Eagle CVO 103 stage 4. I am upgrading from the power Commander 3 to the 5 with an Auto Tuner. When setting up there is no need for a dynamometer and the auto tuner oversees the engine performance while the engine is turned on. This is going on my motorcycle with a dual map switch (change back and forth between to maps).

  • @av77garage97
    @av77garage9711 жыл бұрын

    Great video thanks

  • @ranhazz
    @ranhazz8 жыл бұрын

    What is the difference to the two can port cables that come with the autotune? I received a 4 wire and a 2 wire cable.

  • @MauriFD92
    @MauriFD929 жыл бұрын

    Can install the PCV + Ignition Module and use the IRC?

  • @WhiteGravey
    @WhiteGravey9 жыл бұрын

    i havent used a powercomander since 3... i was looking to install one into a hayabusa i just got but this shit seems so complicated now what do all these modules do?

  • @Deadlysuffera
    @Deadlysuffera10 жыл бұрын

    How do i get the the speed odmeter on the power commander lcd to read for 05 gsxr 600

  • @rgvakis
    @rgvakis11 жыл бұрын

    very informative! but if we want all modules on our bikes must have space ....and nowdays on new sportsbikes thats just simply not there...

  • @MartinMcMartin
    @MartinMcMartin2 жыл бұрын

    Autotune question. I have just installed one, but in the list of devices on the network as you showed in the video it is not listed. I search for new devices but get nothing. The power led on the autotune is on. How would I ensure it is hooked up correctly?

  • @DynojetResearch

    @DynojetResearch

    2 жыл бұрын

    Hey there! Please reach out to our technical support at powercommandertech@dynojet.com or at 702-745-4303 and they will guide you through this.

  • @Wrensspeedshop

    @Wrensspeedshop

    Жыл бұрын

    Did you ever figure out what the issue was? I’m having the same problem right now myself. Thank you

  • @chuxmall
    @chuxmall3 жыл бұрын

    how can I get the termination plug?

  • @victorjpb1
    @victorjpb1 Жыл бұрын

    If I only attach auto tune to my PC-V it still need the termination plug?

  • @brandonpeterson9611
    @brandonpeterson9611 Жыл бұрын

    how water tight are these, can they be submerged?

  • @Wrensspeedshop
    @Wrensspeedshop Жыл бұрын

    I was wondering about the cab termination plug. My new auto tuner didn’t come with one and my PC V didn’t have one either.

  • @FlipHi808

    @FlipHi808

    8 ай бұрын

    If you still wondering, check out the comment from @outdoorzone. “FYI.. ..CAN termination plugs are now built into every unit with a serial number that ends in 1510 or higher, per dynojet when I contacted them on 8-25-20!” I had the same question.

  • @panosdanzis950
    @panosdanzis95010 ай бұрын

    can you tell us how this can be done with power commander 3 ?

  • @kevinhumphrey932
    @kevinhumphrey9323 жыл бұрын

    Can any off the updates or programming be down with a smart phone

  • @DynojetResearch

    @DynojetResearch

    3 жыл бұрын

    Kevin, you'll need a Windows computer to use our software. It cannot be done with a smartphone or tablet.

  • @christinaedwards5617
    @christinaedwards56179 жыл бұрын

    You should make the cables longer so we can put them were we want I have the auto tune and PC and it came with a 4 inch cable

  • @peterlindvall7671

    @peterlindvall7671

    2 жыл бұрын

    I agree! I extended the cable on my KLX250, so I could mount it elswhere.

  • @KillerwhaleTRX
    @KillerwhaleTRX4 жыл бұрын

    Need atricle number can link cable + terminator

  • @user-td2lj2pd7h
    @user-td2lj2pd7h8 жыл бұрын

    Just bought an Auto Tune a few days ago and it didn't come with a can termination plug. I called dyno and they told me this was not necessary anymore for the June 2015 and up modules, but every video I've seen says that I SHOULD be using a can termination plug. Help?

  • @6982chad

    @6982chad

    2 жыл бұрын

    I'm in the same boat. Didn't come with one and doesn't work at all.

  • @Wrensspeedshop

    @Wrensspeedshop

    Жыл бұрын

    Did you ever get the issue resolved? Did you have to have the termination plug for it to work? I

  • @omarmateocampuzanogtz5636
    @omarmateocampuzanogtz56362 жыл бұрын

    i need conect only the power commander v to autotune module..thanks. have video?

  • @DynojetResearch

    @DynojetResearch

    2 жыл бұрын

    Yes, we have several videos available pertaining to the AutoTune module. Please use the "search" feature on our channel and type in "AutoTune".

  • @ebra189
    @ebra1899 жыл бұрын

    quik shifer i have the pvc 5 + auto tune on my 11 zx10r and i need to add a quik shifter to it do i need Power Commander(Q.E.M.) or (S.F.M)+ Quick Shifter sensor to make it work? i know that both will make it work but im wondering if Q.E.M alone will make it work with my 11 zx10r does it adversely affect in the future for street ride thanks #PowerCommander

  • @petermoygannon698
    @petermoygannon6984 жыл бұрын

    all I'm trying to do is get my bmw s1000rr to be smooth and a constant RPM under 4 thousand RPM . this device is my last resort if the 2nd bmw bike shop says it's fine. it's shit in deep traffic doing 40 .jerky unsmooth. in neutral the rev needle is slightly bouncing around.

  • @jammyhires4598
    @jammyhires45989 жыл бұрын

    Too bad your instructions does not say anything about hat small plug.

  • @Joe-fi4hv
    @Joe-fi4hv3 жыл бұрын

    Why have 1 device when you could pay for 3?

  • @TOGTFOPLOX

    @TOGTFOPLOX

    3 жыл бұрын

    Biggest racket ever!!

  • @collinherold8047
    @collinherold80472 жыл бұрын

    Why not design and create just one module/box with everything inside it already? Or at least make it so one module is simply capable of running all those features, and they're like digital expansion packs or something. Idk what engineer, manager, or marketing team thought this was the way to go.

  • @DynojetResearch

    @DynojetResearch

    2 жыл бұрын

    Not everyone needs every module to suit their riding style. The more cost-effective and efficient route is to have optional modules.

  • @klum4502
    @klum45023 жыл бұрын

    $3000.00 later ... the power commander money grab! I have the PC5 and it is junk.

  • @micmcbane8726

    @micmcbane8726

    2 жыл бұрын

    Thunder max I feel I wasted money two.

  • @paulsimpson2232
    @paulsimpson22323 жыл бұрын

    Christ ! Just build one unit that does all ffs...its called a ECU ..this is bollocks .where do I put all this on my bike . I dont have room to carry a spark plug spanner. 🤦‍♂️🤪

  • @DynojetResearch

    @DynojetResearch

    3 жыл бұрын

    Paul, these are optional add-ons for the Power Commander V. You'll still get optimal air/fuel ratio with the Power Commander V itself. These options are for those who want more control over performance.

  • @kc.95
    @kc.95 Жыл бұрын

    Hope you will do better videos to explain everything, pls invest in your social media

  • @jessietaylor2963
    @jessietaylor29633 жыл бұрын

    To much crap there’s no way this is going to be awesome I’m out

  • @HgTrizzey1

    @HgTrizzey1

    Жыл бұрын

    Agreed 😭

  • @motoroadrunner9589
    @motoroadrunner95893 жыл бұрын

    Stupid designs tbh. Having troubles with my gsxr600 install for commander and ignition module. Airings weird and who wants to put a bunch of modules in the bike where there already isn’t much room. Wtf!

Келесі