How To Install Power Commander 6 Software & Map
Автокөліктер мен көлік құралдары
To start using Power Commander 6 fuel tuner, you’ll need to install our Power Commander software (WINDOWS ONLY) before you can start downloading maps. www.dynojet.com/downloads/pow...
Dynojet’s expert Chris will walk you through the installation process step-by-step in this video, making it easy to access premium performance tunes.
Subscribe to our KZread channel: kzread.info...
#Dynojet #DynojetResearch #PowerCommander
Пікірлер: 64
How about a video that shows you ACTUALLY changing a fuel table? AND explaining, CONCEPTUALLY, what the numbers mean, i.e. how it is intended to work.
@zirkote901
Жыл бұрын
For tune the power commander your self fist you need to study fuel, engine timing and a lot of more stuff. after that you need a dyno to test your bike and from those results and knowledge from study you can tune it. Not easy for a video.
@jerlaine1638
Жыл бұрын
They've essentially restricted that to make the EPA happy
@quentinrance8974
8 ай бұрын
Just go Rottweiler Performance and watch their video. Should take care of most of your questions - now go ride.
Thanks for the video! Just bought a used Yamaha V Star and I didn't like the loud aftermarket exhaust they had on her. Installed a used oem exhaust and needed to update the fuel map. Thanks to you, updating the map was a 5 minute job.
I have a 2021 Kawasaki zx10r with a full graves exhaust. Would this benefit my bike. It seems to run fine as is. Do you have a folder for full exhaust?
Seeking communitys assistance! I recently bought a PC6 (Power Commander 6) for my 2023 grom with Zoom Brute exhaust, and a Dingerbuilt intake, but the website offers no basemap for any aftermarket engine products. Can you provide a basemap for my intake/exhaust? Am I suppose to use the stock airbox/exhaust and edit that tune? Thanks in advance.
Hi, I recently purchased part number PC6-17088 which matches my Kawasaki Ninja 1000 SX / 2021. I downloaded the Power Core application / C3 tuning software and connected my Power Commander 6 to it. In the upper left corner, there is a file name Power commander 6.dsln and when I click on the notes (lower window) in the right window it's written 2020-2021 Kawasaki Ninja 1000 SX slip-on exhaust and stock air filter. Does this mean that I have already downloaded a map with Power Commander, so does this mean that I do not need to take any additional steps other than installing it on my motorcycle. Thank you in advance for your help and support
Just bought it for my 2014 CB1000R full exhaust Yoshimura R77D, what map should I use?
Hi Dynojet, Good morning here from the Philippines, Just want to ask if buying and installing Dynojet Power Commander 6 does eliminate backfire on my installed Akrapovic Full System Exhaust for Yamaha MT07 2022 Model? Your response is highly appreciated Thank you very much
Is there a way to see how much fuel % the map I downloaded from Dyno jet website is dumping to the quad ? I want to be sure is getting enough fuel , All 0s doesn’t help
Can I download any map? I want to change my bike from a CB Honda 650 to a KTM 690 DUKE
Do you guys have a full exhaust, modified intake file for a 2008 vfr800? I only saw like 1 or 2 files for a 2008 but nothing with my configuration
General question about power commanders. I'm too broke to take my bike to a proper dyno, and it's a pretty mid bike anyway (08 bandit 650 w/ slipon). It's a bit herky jerky at low speed, sometimes sounds like its starved for fuel and esp when it gets up to running temp, it HATES low speed stuff. Rip around at highway speed for a bit and get into a town, first traffic light if I go down to 1st, it'll idle really low and lope. I keep thinking it's running very lean at these areas, and even when you blip the throttle, the response is not good. Whack the throttle in 1st and you'd expect a 650 to give you enough torque to wheelie but it just hesitates. I haven't a clue if the PC6 will fix that. Guess I'll buy it and bring a laptop with me so I can adjust on a ride?
Friend, I bought a Power Commander V for my R3 2021, but it doesn't come with an oxygen optimizer. I've seen videos where they put it, but mine doesn't come with it. Is the optimizer necessary or can I leave the original cable with the oxygen sensor in the pipe? exhaust?
Will this help clear a code thrown when removing the cat from a 23 Yamaha R1?
I am putting a Yoshimura R77 system on my 2022 Yamaha MT-07. Is there a map file for this exhaust in the program??
Thanks, clear and simple! Btw, my slip-on exhaust (Homologated Mivv Suono on a 2013 Yamaha Fazer 8) does not have a specific map on the site. Everything on the rest of the bike is original, is it correct to use the "slip-on exhaust stock instake" to the power commander or am I missing some features?
@DynojetResearch
2 жыл бұрын
That is correct. Please use the "slip-on exhaust, stock intake".
I bought a power commander 5 and received and 6 and there are no tubes for my motorcycle
Is the auto tune and target tune add on packs compatible with pc6 or do I gotta get a pc5?
I don’t the the download tab on the site, unless the site changed? Can’t get my tune
Can you use a Power commander 5 tube on a power commander 6
Did you guys discontinue the accelerator pump software?
I have a 22mt09 but the throttle feels very slow when released and getting back onto the power. Like it’s just barely delayed. I want some better throttle response.
I can’t figure out how to place a map in position #2 like you can on pc5. Any help?
Thanks for the how to clip. Would this new software recognize already installed autotune and SFM as well or old software version should be used ? Thanks
@DynojetResearch
2 жыл бұрын
The latest software still works with PCV and the new PC6.
How do i download the map from email to my computer?
No tunes for 2022 grom? Only file is for stock grom. Glad i seen it before i purchase it.
I can’t load a map from the site listed under the PCV/PCVI, keeps saying the map is not compatible with PCVI…….
@DynojetResearch
2 жыл бұрын
Please reach out to our technicians at customerservice@dynojet.com and they will point you in the right direction.
@bobdo6825
2 жыл бұрын
Did you sort this ?
@10fantic
2 жыл бұрын
@@bobdo6825 yup, the 6 is not workable in my state of commiefornia. Returned it and got the 5 which is virtually the same thing and everything worked. I can now take it in and get it mapped completely for my setup.
@1ttcobra2003
Жыл бұрын
@@10fanticwould I be able to at least download the maps from dynojet?
Is it possible to use old tunes on a new bike have a 2022 mt07 with full exhaust ‘yoshimura’and dna air filter
@DynojetResearch
2 жыл бұрын
Please fill out our tune request form and our technicians will get you set-up with the information you need! www.dynojet.com/support-form
@needtoknow3168
4 ай бұрын
hi there.. it's now been a year, was wondering how that turned out..? wanna to that to my mt-07. did they get back to u...?
<
@anthonyherrera9878
Жыл бұрын
They only provide 2 maps. I was bummed out when I seen PCV with way more maps
@pastlegit4438
11 ай бұрын
Man I did the same thing 2015 R6 with full exhaust and the only tunes are for stock exhaust and slip on 😔
@anthonyherrera9878
11 ай бұрын
@@pastlegit4438 hella stupid. Payed 400 for nothing lol I ended up flashing my 07r6
Are they universal
Got a 2004 r1 , the tune I tried to send to my pc6 says not compatible ?
@DynojetResearch
2 жыл бұрын
Hello, please reach out to our customer service at Pstech@dynojet.com or at 1-800-992-4993.
I got the pc6, I have a Honda 2008 cbr1000rr and I downloaded the tuning file for that bike with my exact exhaust and it says the map is not compatible with the pc6, but I that's the unit that I selected. No one will reach out to me. I feel like I wasted $400
@DynojetResearch
Жыл бұрын
Please reach out to us at 1-800-992-4993 or fill out our support form below. www.dynojet.com/support-form
Commander 6 need a license??
No ignition adjustment?
@jerlaine1638
Жыл бұрын
Nope they restricted that because according to them we don't need it
@paul1e
Жыл бұрын
@@jerlaine1638 we definitely need it!
What are the benefits of the new software over the previous pcv software? Does it allow you to use the power core software and c3 software? Differences the pc6 can do that the pcv cannot?
@DynojetResearch
2 жыл бұрын
To the end-user there is no benefit. To a shop, there definitely is if they have a dyno. The new PC6 will ONLY work with Power Core.
@jeffreyhinman1397
2 жыл бұрын
@@DynojetResearch well I have auto tune with quick shifter and the sfm on gear dependent maps. Just having the pcv, am I able to data log somehow without the pod with powercore using my pcv? Bought it all new 7 years ago from hardcore racing. I’ve kept the newest software and firmware updates.
@DynojetResearch
2 жыл бұрын
@@jeffreyhinman1397 Yes, if you were to connect the PCV to a laptop while running Power Core you could log all channels.
@jeffreyhinman1397
2 жыл бұрын
@@DynojetResearch awesome, thank you for the information and your time.
Guys.. What you did with the PC6 software really feels like a scam. There is much more variety for PC5 maps, they're not compatible with PC6 and you don't allow access to the Base Maps in C3 Tuner Software to try to emulate similar maps on the new device. I don't understand the decision, no one I've talked to has a positive view from this change you made. You're a reputable brand but going against your own clients is not the way to go. Hope you fix that soon.
@donniedangerracing
Жыл бұрын
Same with my PC6. A huge step backwards from PCV. Ignition Modul, Autotune, and my POD 300 doesn't work anymore with this piece of sh*t
Hope you will do better videos to explain everything, pls invest in your social media
@DynojetResearch
2 жыл бұрын
What would you like to see more of?
@FugglesRift
Жыл бұрын
@@DynojetResearch if you search a specific bike for tunes there's no separation between pc5 and pc6 maps even though they are not compatible. i purchased a pcv but got a pc6 instead, i had pcv tunes all set to go but thye were not compatible and i had no idea why. i finally figured out where the pc6 maps were located but its not clear how the maps differ as an end user. for example if i get a pc5 map even for a stock bike as long as its not a zero tune i can see what the fuel changes are. on the pc6 maps even for a modified bike the tune displays all zeroes (as the tune is hidden from the end user behind the scenes). at the very least at least clan up the site to separate the 5 and the 6 stuff. it would be nice to also be able to import a pcv map to a pc6 for people that dont have tunes listed anymore.
@DynojetResearch
Жыл бұрын
@@FugglesRift Thank you, I have forwarded this information to our team.
🤮🤮🤮🤮