Dynojet Power Commander V: Speed and Gear Calibration
Автокөліктер мен көлік құралдары
This video goes over the optional Speed and Gear Inputs (Connection, Configuration, and Calibration) for the Power Commander V fuel tuner. www.dynojet.com/power-commander
For more inspiration and knowledge on maximizing your Power Sports experience, check out our blog: www.dynojet.com/blog
For more support related articles and videos, please visit our Help Center: dynojet.zendesk.com/hc/en-us
Subscribe to our channel: kzread.info...
Instagram: / dynojetresearch
Facebook: / dynojetresearch
Пікірлер: 13
very helpfull... I ve already tried to send an email for dynojet an it wasn't good explained... Now I understood how to set up maps per gear at my Daytona 675r. thanks!
Very helpfull.
do I need an iginition module to activate launch control, I currently have only the pc5
the traction control? will be added in the future to the PCV?
hey, i noticed the Gear Input & Analog input cables were worn out. I took them out to cut a bit and put them back in but now I forgot in what position they were connected. I have put them in according to the fold of cables, but the question is; would it be remarkable if they were wired incorrectly? Thank you.!!
how adjust max speed for top speed n top gear?
@DynojetResearch
2 жыл бұрын
Please reach out to our tech support at powercommandertech@dynojet.com for help with this!
There is a lot of confusion as to features from various generations of controllers and for various brands and models of bikes ect.. Flash Tune Brand and DynoJet Power Vision 3 can flash the ECU for miles per hour for example if you change sprocket sizes to re-calibrate your speedometer..
@DynojetResearch
4 жыл бұрын
Mike, how can we help? What bike do you have and what would you like to do with the Power Vision 3?
Does that mean if my motorcycle doesn't run at 50kmh in 5th gear and I have to downshift every time speed limit is 50kmh. I can chane it ant it will run without downshifting?
@ScarfaceBikes
2 жыл бұрын
me too my bike when i run from first gear to 4th gear the rpm is 10500 but when i shift the gear to the 5th gear the rpm is to down to the 9000rpm , i can’t open the rev limiter on the 5th gear , i tried to open the rev limiter actuly i open it to 11250 rpm , but still on the 5th gear the rpm down to 9000 rpm
So what wire do I tap it into on a Honda rancher
@DynojetResearch
2 жыл бұрын
Please reach out to our technicians at powercommandertech@dynojet.com for help with your specific model vehicle.