How do I set up failsafe for the Hotrc DS600 LCD model?

Hello. Thank you so much for your message. I have tried the steering trim as you suggested. The problem is the left steering trim has no range past center whereas the right steering trim has full range to the right. Why will left st trim not steer more to the left?

Is the control mixing the ability to use this remote to make those omni wheel RC cars turn on spot or drive left and right?

@HotRC-Sophy

Жыл бұрын

The mixed control mode allows 1CH and 2CH to control 2 motors at the same time to perform accelerator forward and reverse or differential steering, but this remote control is suitable for ship model. If you are using an RC car, you can take a look at our CT600 remote control

How do you completely reset transmitter & receiver to factory zero original settings?

@HotRC-Sophy

Жыл бұрын

Can only be calibrated, not factory reset! Calibration steps: First, the remote control is in the off state, press and hold the fine-tuning up button, and at the same time turn on the power switch of the remote control, you can see the marquee phenomenon when you hear the sound of Didi, then we turn the joystick to the left, and then turn the joystick to the left Go right, up, and down, then release the joystick to return to the middle position, and then press the fine-tuning button to save the data, that is, the calibration is completed.

Where can I find the wiring diagram for the pins on the receiver? My DS600 came with no documentation. Nothing at all.

@HotRC-Sophy

Жыл бұрын

If you don't know how to link the DS600 remote, you can watch our latest DS600 remote video

how to change to be the same as vdo

while mix function the problem ch1 should control left and right but the action is forward and backwards ch2 should control forward and back ward but action is left and right

@HotRC-Sophy

10 ай бұрын

Change the wires plugged into the receiver to see if the wires on your machine are reversed

How do you achieve differential steering with this mixing. I am not unable to achieve after watching this video

@HotRC-Sophy

Жыл бұрын

CH1/CH2 mixed control 1. Function description The 1-channel/2-channel mixed control mode allows the 1-channel and 2-channel to control 2 motors at the same time for the forward and backward of the accelerator and the differential steering function. 2. Setting method A. The remote control is turned off; B. Press and hold the 【3】channel button, and then turn on the power switch of the remote control, the mixing indicator on the remote control panel will light up. C. The operation method of opening and closing the mixing control is the same, and the indicator light of the mixing control closing state will go out.

@brandonwightman5705

Жыл бұрын

@@HotRC-Sophy does this automatically engage differential steering and does this work on the 4+2 or only on the 6 channel? When I place it in mixing mode I get no response

@HotRC-Sophy

Жыл бұрын

@@brandonwightman5705 Which receiver are you using? Also, is the ESC you use a one-way ESC or a two-way ESC? The remote control does not automatically enable differential steering, it needs to be set.

@brandonwightman5705

Жыл бұрын

@@HotRC-Sophy currently have the 4+2 receiver and the ESC is a bidirectional ESC. How can do I set it?

@brandonwightman5705

Жыл бұрын

​@@HotRC-SophyHello do you have a reply to prior comment?