Пікірлер

• 
  @vincealcantara19532 сағат бұрын

  Why the green is Flashing and i try to connect nothing happens it keep flashing😢😢

• 
  @ChristianSaiz8 сағат бұрын

  @HotRC-Shopy I have touched all the buttons and deconfigured both the receiver and the transmitter completely. Is there any option to reset both the emitter and receiver to factory default values?

• 
  @versus833022 сағат бұрын

  Can i instal 2 type of battery on same time 18650 and lion batterry?

• 
  @versus8330Күн бұрын

  What type of 18650 battery ? Button or flat

• 
  @solanobordim2 күн бұрын

  Which battery should I use with the receiver?

• 
  @Boogie_the_cat3 күн бұрын

  Good video. This transmitter and receiver are excellent. I got the transmitter with two receivers and the lipo battery for $50 on Amazon. My Spektrum receiver that died was $90 because of the AVC. On my Felony, the built-in gyro in the HotRC works almost as good as the Felony stock AVC\gyro function. For anyone wondering, i use the gyro at 25% sensitivity with 100% travel setting. Haven't tried the anti-shake \ anti-wobble settings, because my car is 15 pounds, so i don't get any wobble at 25% sensitivity. Thanks for making a great transmitter and receiver combo affordable. I'm getting some underbody light strips tomorrow, with the remote on\off function, so this video will help me set them up. 👍🏽👍🏽

• 
  @garrenpelealu73075 күн бұрын

  Thanks was willing to buy yours

• 
  @user-ot5tz9pq4k7 күн бұрын

  А питание пульта какое, какие батарейки?

• 
  @HotRC-Sophy7 күн бұрын

  DS600 remote controller has built-in rechargeable 1200mah lithium battery

• 
  @underground42909 күн бұрын

  can i bind multiple recivers

• 
  @HotRC-Sophy8 күн бұрын

  One remote controller can bind multiple receivers at the same time

• 
  @versus83309 күн бұрын

  Hi hallo can i bind ct 04 receiver to this transmiter ct08 ?

• 
  @HotRC-Sophy8 күн бұрын

  It can be done, but we generally do not recommend customers to use the F-04A receiver with the CT-8A remote control, because the F-04A receiver does not have a signal return function, so many functions of the CT-8A remote control cannot be realized

• 
  @versus83308 күн бұрын

  @@HotRC-Sophy thanks for ur information cause i want to buy ct6A receiver ,its hard to find ct8a receiver only without transmiter

• 
  @HotRC-Sophy8 күн бұрын

  @@versus8330 In fact, except for the F-04A receiver and the F-05A receiver, other receivers can be used with the CT-8A transmitter.

• 
  @versus83308 күн бұрын

  @@HotRC-Sophy thanks i already test on F-06A and its worked, if i turn on 2 binded rx can i select one or both of them will connect?

• 
  @HotRC-Sophy7 күн бұрын

  @@versus8330 The remote control can perform code matching with multiple receivers at the same time

• 
  @itsoah_fpv150910 күн бұрын

  Hopefully there is an update for change the colour for interface it's hard to see within green and grey or blue it's suck colour of choice from factory, and change naming for some like EPA,TRIM, REV, PROS& CONS, EXPONENTIAL CURVE, HOTRC COMPANY PLEASE TAKE AN A GOOD, ACTION JUST DON'T SILENT OKAY, THIS IS SO IMPORTANT FOR GOOD PRICE AND EASY ACCESS INTERFACE.. other need to add please make all binding video for all your available receiver especially micro receiver F-04B

• 
  @itsoah_fpv150910 күн бұрын

  Hopefully there is an update for change the colour for interface it's hard to see within green and grey or blue it's suck colour of choice from factory, and change naming for some like EPA,TRIM, REV, PROS& CONS, EXPONENTIAL CURVE, HOTRC COMPANY PLEASE TAKE AN A GOOD ACTION JUST DON'T SILENT OKAY, THIS IS SO IMPORTANT FOR GOOD PRICE AND EASY ACCESS INTERFACE

• 
  @itsoah_fpv150910 күн бұрын

  Hopefully there is an update for change the colour for interface it's hard to see within green and grey or blue it's suck colour of choice from factory, and change naming for some like EPA,TRIM, REV, PROS& CONS, EXPONENTIAL CURVE, HOTRC COMPANY PLEASE TAKE AN A GOOD ACTION JUST DON'T SILENT OKAY, THIS IS SO IMPORTANT FOR GOOD PRICE AND EASY ACCESS INTERFACE

• 
  @itsoah_fpv150910 күн бұрын

  Hopefully there is an update for change the colour for interface it's hard to see within green and grey or blue it's suck colour of choice from factory, and change naming for some like EPA,TRIM, REV, PROS& CONS, EXPONENTIAL CURVE, HOTRC COMPANY PLEASE TAKE AN A GOOD ACTION JUST DON'T SILENT OKAY, THIS IS SO IMPORTANT FOR GOOD PRICE AND EASY ACCESS INTERFACE

• 
  @totembayuasma10 күн бұрын

  how to fail safe receiver ?please help power off, but motor stil running

• 
  @HotRC-Sophy8 күн бұрын

  You can turn on the fail safe setting

• 
  @totembayuasma7 күн бұрын

  @@HotRC-Sophy how?..

• 
  @HotRC-Sophy7 күн бұрын

  @@totembayuasma You can check out our previous videos. We have released related videos.

• 
  @totembayuasma10 күн бұрын

  My temote broken sistem mallfungtion..how to fail safe receiver ?please help power off, but motor stil running

• 
  @HotRC-Sophy8 күн бұрын

  You can check out our previous videos where we filmed the out-of-control protection

• 
  @tonydelovski808811 күн бұрын

  Hi, are you doing anything about the multiple reports of high battery drain in the remote or the remote completely switching off at random when using AA batteries? Thanks

• 
  @HotRC-Sophy8 күн бұрын

  1. Since the remote control has a color screen, it consumes more power than other remote controls, so we recommend that customers use 18650 batteries + other batteries; 2. The remote control will randomly shut down when using AA batteries. Please check whether the battery type is selected incorrectly. Secondly, please check whether the battery is charged.

• 
  @armstrong90915 күн бұрын

  Does it compliance with FCC or c-tick?

• 
  @armstrong90915 күн бұрын

  Is the HotRC CT-6A compliant with C-Tick, FCC, or ETSI standards? CT-6A 满足C-Tick, FCC, ETSI 这三个标准中的一个吗？

• 
  @nidzdotnet7617 күн бұрын

  Can you please post a trim control video for this v3 remote please. Also can you only set trim control for ch1 and ch2? How to trim ch3-6?

• 
  @HotRC-Sophy14 күн бұрын

  Do you want to know how to set up the fine-tuning of the DS600 remote control? OK, I will make a video to explain it when I have time.

• 
  @TV-pk9ot20 күн бұрын

  안녕하세요 hotrc ds-600 구형은 구할수없나요..? lcd없는 구형 송신기 수신기가 꼭필요합니다. 호보보드rc 신형을 쓰면 스티어링이 안됩니다.

• 
  @samthomson936520 күн бұрын

  Can i pair this with my HotRc CT8a?

• 
  @HotRC-Sophy20 күн бұрын

  The C-04A receiver cannot pair with the new CT-8A transmitter

• 
  @aandro413222 күн бұрын

  Is there a transmitter Ct-4a receiver f-04a failsafe feature?

• 
  @HotRC-Sophy20 күн бұрын

  The CT-4A remote controller has a fail-safe function

• 
  @aandro413219 күн бұрын

  ​@@HotRC-SophyI bought 2 ct-4a, but I don't have the manual... it's not even in KZread videos

• 
  @HotRC-Sophy18 күн бұрын

  @@aandro4132 Is it convenient for you to send me your email address? I will send you an electronic manual.

• 
  @aandro413218 күн бұрын

  @@HotRC-Sophy 고맙습니다

• 
  @aandro413215 күн бұрын

  Yes~​@@HotRC-Sophy

• 
  @aandro413223 күн бұрын

  송신기Ct-4a 수신기 f-04a failsafe 기능이 있습니까?

• 
  @Jvani8326 күн бұрын

  I bought a ct-8A but please use English menu, and add some different colo menus with fw update, thanks

• 
  @JamesDirtRC26 күн бұрын

  I have 6ch on my WPL c24-1 and set up Lights, winch, on ch3 an ch4. WORKS AMAZING. and was Easy to set up. Thank you

• 
  @nidzdotnet76Ай бұрын

  Can I trim only channels 1 and 2? How can i change trim level of other channels? Can you put up some videos with the V3 remote with the LCD screen please?

• 
  @eliseotorres3168Ай бұрын

  Hi, I love it! Hey, I just wonder if HOTRC DS-4A/HT-6A transmitters could work with F-01AT receiver?

• 
  @HotRC-SophyАй бұрын

  Except for the F-05A receiver, which can only be used with the HT-5A and FHT-6A remote controllers, all other HOTRC receivers are compatible with the remote controllers.

• 
  @eliseotorres3168Ай бұрын

  @@HotRC-Sophy Ohh i understand now. The reason I like F-01AT receiver is because I can notice that I could control lighting system with transmitters very much better and easier without any complication issues. The RC Pistol Transmitter is cool. But as for me, I’m more into the surface sticks transmitter with FPV monitor/Display screen to control lighting systems that are specifically for RC drift cars, RC Rock Crawlers, any RC vehicles with wheels on a ground. The sticks on left side is up to drive/down to reverse only and on right side is turn left/right only. I like to use both of my hands with sticks transmitter to control RC vehicles on grass and rocks. I notice these HOTRC sticks transmitters are usually designed for airplane, helicopter, drone, other limited DIY vehicles. The two sticks movement both on the transmitter move up and down and left and right sides are sometimes confused to Users who tend to use RC drift cars, rock crawlers, Rally race cars to control. My question/feedback to you is Maybe HOTRC HQ could create and incorporate new sticks transmitter contain FPV monitor to view behind windshield on RC cars, trucks via FPV camera and easy to read of Display Screen for steering, speed trim adjustment along with toggle a buttons to turn on/off (open/closing methods) to control regular lighting systems (headlight, brake light, turn signals, etc) plus more channels to control additional light bar accessories for mount on roof and bumper, motor winch of RC Vehicles that could directly work with F-01AT receiver. I was research about a company called Futaba that sell 2.4GHz T-FHSS 4GRS surface sticks transmitter and 2.4GHz T-FHSS SR 7XC sticks transmitter. They look great, but their cost is very ridiculous expensive and hard to read Display screen with too much of different programmables and adjustments plus very complication. I love that HOTRC offer very much better quality and very affordable price with transmitters for RC vehicle users like me who are on tight budget.

• 
  @sekuidwert8648Ай бұрын

  Can i use flysky sm100 for simulation?

• 
  @realshuva1833Ай бұрын

  Battery didn't last.

• 
  @Reyyy_132Ай бұрын

  What does green qnd blue light blinking at the same time mean

• 
  @HotRC-Sophy20 күн бұрын

  Are there any wrong signal connections?

• 
  @JamesDirtRCАй бұрын

  Oh this is Awesome. Thank you. Much love to you. Love these Controllers.

• 
  @mnus2016Ай бұрын

  Thanks for the video. It convinced me to ditch idea to buy F-01AT, I will buy cheapest F-04AT receiver instead for my car. Light control shouldn't be so tricky. Just use additional channels - transmitter has enough of those. As for gyroscope sensitivity just use auxiliary analog channel. It transmitter has one. Does CT-8A has additional auxiliary analog(potentiometers) channels? Or it has only digital(switches) ones? Another option to change gyro sensitivity - make a menu for that. Transmitter can send sensitivity directly to receiver. Obviously firmware modification needed for transmitter and receiver.

• 
  @eliseotorres3168Ай бұрын

  Hi, I’m curious. What about HT-6A RC Transmitter? Can it work with this receiver for lights functional system?

• 
  @user-ld8nb8jj7dАй бұрын

  Lok open video

• 
  @user-kv8lb9xx4wАй бұрын

  What channel can i put the power supply for reciever ?

• 
  @HotRC-SophyАй бұрын

  You can connect any power channel you want, each channel is available

• 
  @user-kv8lb9xx4wАй бұрын

  @@HotRC-Sophy thank you for your fast reply ⚡

• 
  @user-kv8lb9xx4wАй бұрын

  I have trouble binding with the receiver . Transmitter is just flashing quickly with green light . I followed the steps of the manual for code matching . What do I do. ?

• 
  @HotRC-SophyАй бұрын

  @@user-kv8lb9xx4w Be careful not to place the remote control and receiver too close to avoid blocking the signal if it is too close.

• 
  @user-kv8lb9xx4wАй бұрын

  @@HotRC-Sophy it is still not working

• 
  @muhammadadityarayyan2378Ай бұрын

  Can it connect to phone or it cant connect to phone?

• 
  @user-ld8nb8jj7dАй бұрын

  Ounloking video

• 
  @mychasasaki5705Ай бұрын

  Hello can u help me pless😢 ..how can i bind the resiver CT -400A with the old trinmiter CT -400..???

• 
  @HotRC-SophyАй бұрын

  Sorry, but the CT400 remote control cannot be coded and matched with the current F-04A receiver.

• 
  @mychasasaki5705Ай бұрын

  Hello can u help me ..how can i bind the resiver CT -400A with the old trinmiter CT -400..???

• 
  @HotRC-Sophy20 күн бұрын

  I'm sorry, it may be a translation problem. I don't quite understand what you mean. Could you please elaborate on your question?

• 
  @twitchtvjekar3333Ай бұрын

  Hey there I'm having an issue with my transmitter, when my car becomes torqued up the connection drops out could I get some help please

• 
  @HotRC-SophyАй бұрын

  If it's convenient, friend, you can send me a video on Facebook and I'll see what's going on.

• 
  @nidzdotnet76Ай бұрын

  I wish this was better explained in English

• 
  @HotRC-SophyАй бұрын

  Because we are not proficient in English, we can only translate Chinese into English and put it in the video. If it has any impact on your viewing experience, I am sorry, my friend.

• 
  @user-ld8nb8jj7dАй бұрын

  bangla