Hi I love this design keep it up

@HotRC-Sophy

2 жыл бұрын

Thank you for your support, we will continue to develop new RC remote control

How do you completely reset transmitter & receiver to factory zero original settings?

Very unique form factor! @HOTRC do you have small receiver which works with 1S? If not, with what brands is the protocol compatible?

@HotRC-Sophy

Жыл бұрын

Thank you very much for your recognition of our products, but we don't have a small receiver that can be used with 1S now, and the two existing receivers can only be paired with our DS600 remote control

@friendlymaendi

Жыл бұрын

How about CT400 4 channel receiver? It binds to my DS600

Can you mix two channels? For example, for Delta wings or Elevons? This would be great for a Zagi Wing Hand Launch Glider.

Can the operation of channels 3-5 be changed from latching low/high to momentary low/high like channel 6?

@HotRC-Sophy

2 жыл бұрын

This can be achieved, but it needs to be customized. At present, only the 6th channel of our DS600 remote control is in jog mode.

@MakingandBreaking

2 жыл бұрын

@@HotRC-Sophy is it a user-programmable option or does the firmware require an update?

@MakingandBreaking

2 жыл бұрын

Also, is it possible to program a button with multiple positions that it scrolls through, such as 1300 1500 1800 on 3 positions

@HotRC-Sophy

2 жыл бұрын

@@MakingandBreaking Our product is not open source, so users cannot program it. If you need to make the 3, 4, and 5 channels also have jog, you can only customize the product.

@HotRC-Sophy

2 жыл бұрын

@@MakingandBreaking Our remote currently cannot program buttons with multiple scroll positions

hi i have a 4+2 receiver is there an option to make channel 6 work the same as channel 5?

@HotRC-Sophy

Жыл бұрын

Both channel 5 and channel 6 of the 4+2 receiver are level signals, but they have different effects when used.

Should this work with Hotrc HT-8A SBUS Receiver? Mine doesn’t bind.

@HotRC-Sophy

Жыл бұрын

The DS-600 remote control cannot be paired with other models of receivers.

@friendlymaendi

Жыл бұрын

CT400 from HotRC is a small receiver that works.

What slot on the transmitter do you plug power into??

@HotRC-Sophy

Жыл бұрын

Our transmitter has a built-in lithium battery. If your transmitter is out of power, you only need to connect the matching power cord to the right socket of the transmitter, which is located on the right side of our joystick.

@BOXthief

Жыл бұрын

@@HotRC-Sophy To POWER the SERVO??

@HotRC-Sophy

Жыл бұрын

​@@BOXthief I think maybe what I said is not very clear. If the transmitter, that is, the remote control, is out of power, connect the paired power cable to the right side of the remote control for charging. If the receiver needs power, then except for the last channel, other all channels can be connected to the power supply, be careful not to exceed 12v

@friendlymaendi

Жыл бұрын

@@BOXthief I think you meant the receiver not the transmitter. You can power it through any of the slots.

It comes with no instructions and the links provided don’t say anything about how to wire the receiver. It looks like I need some special plug for all those pins? The links the seller provides don’t have any Information about installing the receiver and the Facebook link won’t let me comment to ask a question without being friends. It links like I have to send it back.

@wellreally831

Жыл бұрын

do an image search for: "hotrc DS600 manual" you will find something

@HotRC-Sophy

3 ай бұрын

1. Connect the power supply to the receiver 2. Press the small button on the receiver (code matching button) 3. When you see the receiver light flashing, turn on the remote control 4. Code matching completed

My problem is when select the thumbstick to the right the cart goes left and visa versa. How can i change so cart goes in same direction as the thumbstick?

@jeron9272

8 ай бұрын

Reverse the polarity of the wiring.

@HotRC-Sophy

3 ай бұрын

You can set the direction of the remote control to reverse so that the remote control and your car are in the same direction. Forward and reverse channel settings: kzread.info/dash/bejne/a4al0revn9jbYNo.html

Where do I get more recivers?

@HotRC-Sophy

Жыл бұрын

You can go directly to Amazon or AliExpress to buy it!

Is there a PDF anywhere for this?

@HotRC-Sophy

2 жыл бұрын

If you did not receive the remote control manual in PDF, please contact our Facebook account, we will send you the manual in PDF format, thank you very much Link: facebook.com/profile.php?id=100081651792984

@HotRC-Sophy

Жыл бұрын

If you need, you can contact us via our email：a13128790602@gamil.com

How do you completely reset transmitter & receiver to factory zero original settings?