Good clean and clear Video!!!! fun fact.... the Goggles 2 (when powered up) can access the SD card ( or any card) when connected to a PC via the USB c port. Comes in handy if you forget your card reader and have to dump footage.

Joshua Gibson here. Just ordered a set of these from you guys,to replace the original V1 Dji fpv I’ve been using sense they came out . I’m so excited for the upgrade.

worked for me ! thank you!

Great video and it worked well. So here is a question from a TOTAL NOOB. now that I have done that, what do I choose? Is 20mhz better than 40? Which one should I pick, and after choosing one, do I leave it in whatever random channel, or do I need to select a specific one since it's now manual? and this question is for anyone one in the community as well

Just got a cinebot25 S and integra goggles that i may need this for 😁 great drone so far. Just cruised around the yard a bit 😉 got it yesterday. Thanks for the directions and file 😁

If you have problems formatting the SD card within the goggles itself try this: Format the SD Card to exFat Format on Windows, afterwards format it within the goggles.

JB has done this on the new Avata 2 and it works 💪 🎉

No bs right to the point! love it. Pleas do one about fixing vistas with poor range,

Sweet thank you.

11/02/2024 still working on DJI G2

Do I have to somehow "turn on" these channels also? Or after making sure they're dislayed in settings it means that my goggles just transmit further now?

Does this make the reception degrade? I just put the file on my sd card last night and just flew a couple packs. And the goggles reception got pretty low pretty fast in places where I would have 50mbps before. Before I put that on my my sd card for my goggles. I barley ever saw it move from 50mbps. Maybe its because i was still using auto and not manual set to a specific channel.

does it also work with the avata?

How do you share the screen on the phone?

Hey LetsflyRC…..I love me some Ham

This week I bought a Google 2 for my Mavic 3, but the flight distance was terrible. I tried the unlock as shown in the video, but without result The firmware V01.06.000 of my googles 2. Can anyone tell me what is doing wrong

THANK YOU!

Anyone know why my channal leds are not working? On the old V2 Goggles?

It works for the o3 but then when I want to connect my dji avata my controller won't connect...

hi do we leave it in manual mode or auto mode after the hack? no video explains what to do after fcc hack

@turgut_krm

8 ай бұрын

it should be Auto mode

@Chillin-fpv

3 ай бұрын

You can leave it in auto. But if you want to be on a specific channel use manual.

This does not work with the latest firmware update that enables the Mavic 3 pro series !!!

I Would like to know how to unlock channels 12,13 and 14 in 2.4ghz DJI mini 2

I did this but now my channels are greyed out so i can´t even choose manual anymore. What did i do wrong? I´m on OSX when putting the file on the sd-card.

@Chillin-fpv

3 ай бұрын

You have to have a quad powered up in order to access those settings

Will this work with firmware 01.09.0000? Tried this process but didnt work

@junebugpetty7386

5 ай бұрын

I just tried it and it worked for me and I’m on the latest firmware

@theinnocent714

5 ай бұрын

@@junebugpetty7386 i wonder why it worked for some doesnt for others. Had to buy ine thats unlocked n sold mine. Was driving me mad

Why can't I switch the channel mode from auto to manual??

@dysisinfluence

5 ай бұрын

you have to connect the goggle with the airunit before you can switch modes I had the same issue

I DID THAT on my Integra and I still don't have FCC unlocked =(

How did you have view on phone from the goggles.

@kenwu324

Ай бұрын

I have the same question

@thaikerfpv

Ай бұрын

@@kenwu324 it worked via OTG cable to Goggles and only when connected air unit, cant figured out how to get Goggles view feed to my phone , in example to watch Album ..without arming quad..

I can't download it

Hi what sd card aee you using in yours thanks

In the settings the "channel mode" option is gray for me so I cant press it. how do i fix that

@dailydronejourney

2 ай бұрын

hi, its same with me. do you have solve that issue ? What is your goggle type ? I'm using Goggle v2 not goggle 2. please advice

@markhassing235

2 ай бұрын

@@dailydronejourney hi, yes i've found the problem and it was quite a stupid and simple one haha. The goggles must be connected to both the drone and controller and then the channel mode option is available so everything must be on and connected to eachother.

@dailydronejourney

2 ай бұрын

@@markhassing235 haha, are you serrious ? I think I do stupid thing like you.. I just power on the goggle and drone, the controller is not..🤣 Ok, I Will try as your suggestion.. thanks for your reply

stupid question do you have to leave the sd card in the goggles

@Shreyash-X0x11

3 ай бұрын

no once its done its done then u can pull it back or delete the file from sdcard

If only it was that simple, first of all, what firmware are the goggles running on? i had to downgrade to 01.04.0000 to make it work on mine.

@Chillin-fpv

3 ай бұрын

I'm on the latest firmware and it worked fine. But now I'm thinking my video signal got worse because of it.

it works on me..just now

Übertragung bleibt ausgegraut😢

tried it for integra goggles, didnt work

@justreddog

4 күн бұрын

worked fine for my integras 20hz i have 7.

Does this not work anymore? I followed every step and I now have 3 channels, not 7. Is there an update to this guide?

@benihamdani5871

7 ай бұрын

I have same problem too, are you ablr to solved it now ? I followed every single step at least 6 hours and didn't get anything 😂

@evil.hamster-fpv

5 ай бұрын

On 40mhz or 20? On 40 must be 3

@ctl6563

5 ай бұрын

@@benihamdani5871 did you unpack the file first? this held me back

@HeavyJams

5 ай бұрын

@@evil.hamster-fpv on both frequencies

@serenestateofbeing1062

5 ай бұрын

​@evil.hamster-fpv what's better for range? 20 or 40?

👍👍