Пікірлер

• 
  @zakaroonetwork77715 сағат бұрын

  What does the Red Flashing light mean when it’s Charging? Will it turn green when it’s done? Or is the flashing saying it’s done charging?

• 
  @ChadCarney-hu3du3 күн бұрын

  The radio binds to elrs drones without adding any new models, what was the point of doing this?

• 
  @CCC01224 күн бұрын

  Great video

• 
  @james668726 күн бұрын

  I’m about to see if my radio floats or not because this thing sucks

• 
  @7eal7ech15 күн бұрын

  I was bouncing back and forth between a few ready to go kits. I was going to get the BetaFPV kit, but after watching this, the Vision40 just felt like what I needed to get where I want to be. Thanks so much! Next time I watch this video, it will be before my first flight!

• 
  @gliderrider20 күн бұрын

  I want to use this for gliders and planes. Not sure if im in the right place. Lol

• 
  @JacobD-ug7wh21 күн бұрын

  Tx12 mk2 and axisflying c35

• 
  @Nicksbf10924 күн бұрын

  It won't instal on Windows 11 even as administrator? Windows said No.

• 
  @anthonyfields619127 күн бұрын

  Hd vision 40 whoop 1s so fun!

• 
  @brokeboi36929 күн бұрын

  just did this, camera is polished clean but sooooo out of focus

• 
  @j2skillfulАй бұрын

  Is this a 'permanent' fix? Or will the camera fog/blur up after a while like some of the restored headlights? I'm thinking about doing this on the front camera of my car

• 
  @tabalaistation8944Ай бұрын

  Can 18650 2s (for Google fatshark, balancer port available) be charged with this, which voltage should I choose?

• 
  @MoeDefinitely901Ай бұрын

  Big question: Once you see that you have extra channels unlocked shall i place it in auto to let the goggles auto select the best channel? Or should I choose them manually? I'm a rookie at FPV

• 
  @abhinavdamle662825 күн бұрын

  I have the same query , did you get an answer yet ?

• 
  @MoeDefinitely90124 күн бұрын

  @@abhinavdamle6628 from my own findings, i leave it in auto. It'll find the best channel for you. And I do have more range after this unlock.

• 
  @Vikki_YuАй бұрын

  Hey there, i have trouble with remove the li-ion battery from the tray. Can you show how you do this?

• 
  @gsegallisАй бұрын

  Cannot tell you how long I searched for the answer about which side of the balance port to use with a 3, 2 or 1S batteries. Even the manual doesn't say! Thank You!

• 
  @stefano_2Ай бұрын

  Do I have to somehow "turn on" these channels also? Or after making sure they're dislayed in settings it means that my goggles just transmit further now?

• 
  @freshperspectiveproduction6044Ай бұрын

  a huge help, as always shawn. appreciate you.

• 
  @kevinschuurmans7738Ай бұрын

  Cheers mate!!

• 
  @Farfromhome_lessАй бұрын

  Awesome

• 
  @joef6398Ай бұрын

  Thanks for this easy way to bind . It's so hard finding simple info , keep up the good work .

• 
  @mranhs953Ай бұрын

  ok sir thanks for the video i try to bind with my darwin babe ape pro it really works thanks for sharing me the video have a fun and nice day

• 
  @betlikeyourerich6904Ай бұрын

  I can't get mine to update. Just beeps super quick for 5 minutes or so, but doesnt update.

• 
  @betlikeyourerich6904Ай бұрын

  Figured it out. Need to format Fat32 on mac in utility disk first.

• 
  @dmz752 ай бұрын

  My V2 already in fcc mode but Doesnt work for dji fpv drone

• 
  @BergeronFPV2 ай бұрын

  I backed up my old stuff and can confirm these files are just out of date or something. idk problem solved. if you came here to set up your boxer and bricked it right away, your not the only one lol

• 
  @user-mg8vn1yb6y2 ай бұрын

  How to conect er8 with radio master xt16

• 
  @jorgeguillen68062 ай бұрын

  Thanks

• 
  @--JohnDoe2 ай бұрын

  Have you tested the rf output power level of the dji goggles 2? I did and it's very high & being 1 inch from your brain is worst case scenario. China doesn't care about your health. I briefly read about it and I read it will cause cumulative & irreversible cognitive decline.

• 
  @organiccleanfoodconnection2 ай бұрын

  I have a flywoo fly lens that shows up in the app but does not pop up the activation window. I’ve tried both apps suggestions

• 
  @CarlosRodriguez-vg2ob2 ай бұрын

  Great video and it worked well. So here is a question from a TOTAL NOOB. now that I have done that, what do I choose? Is 20mhz better than 40? Which one should I pick, and after choosing one, do I leave it in whatever random channel, or do I need to select a specific one since it's now manual? and this question is for anyone one in the community as well

• 
  @LennonZFPV11 күн бұрын

  What a shame no one answered you.. same boat here.

• 
  @CarlosRodriguez-vg2ob11 күн бұрын

  @@LennonZFPV lol yeah I gave up waiting and I set it to 40. So far so good.

• 
  @LennonZFPV10 күн бұрын

  @@CarlosRodriguez-vg2ob I set it to auto and saw no difference. Which channel did you pick?

• 
  @CarlosRodriguez-vg2ob10 күн бұрын

  @@LennonZFPV channel 1 40hz

• 
  @harrylode12 ай бұрын

  This week I bought a Google 2 for my Mavic 3, but the flight distance was terrible. I tried the unlock as shown in the video, but without result The firmware V01.06.000 of my googles 2. Can anyone tell me what is doing wrong

• 
  @nathanvidal91722 ай бұрын

  This looks so simple, but this is the first video that explains it really well, before I was doing it too slowly. excellent video, keep it up!

• 
  @thaikerfpv2 ай бұрын

  How did you have view on phone from the goggles.

• 
  @kenwu3242 ай бұрын

  I have the same question

• 
  @thaikerfpv2 ай бұрын

  @@kenwu324 it worked via OTG cable to Goggles and only when connected air unit, cant figured out how to get Goggles view feed to my phone , in example to watch Album ..without arming quad..

• 
  @Hoby_Drones2 ай бұрын

  I can't download it

• 
  @somerandomvideos6452 ай бұрын

  This is not a quick start guide. Waste of time

• 
  @dhanushka931Ай бұрын

  This is a really good start up guide.

• 
  @doduroyal848014 күн бұрын

  It is actually a quit good one

• 
  @acidhead10012 ай бұрын

  hey there, can you tellme what to download? i'm doing a sailing ship with up to 8 servo-winches(not a drone) any recommendation? and thanks for your poste.

• 
  @alansyvannarath78223 ай бұрын

  I DID THAT on my Integra and I still don't have FCC unlocked =(

• 
  @suji99hettiarachchi3 ай бұрын

  Hello,I put some Machine oil to my zorro right hand gimbal because it's not smooth at all but unexpectedly I was put about 5ml(millieters) on the gimbal right side and swiped it with a clothes,I think there's about 2ml(militers) goes through the gimbal to inside of the transmitter.Hence will it occur to short circuit on Zorro? Please reply as early as possible.

• 
  @stevetrixfpv3 ай бұрын

  No bs right to the point! love it. Pleas do one about fixing vistas with poor range,

• 
  @terrysowell72793 ай бұрын

  Great useful stuff! But I have a problem. My V2 Goggles are stuck in HD Air Unit mode with no option on the Settings/Device menus to switch back and forth between modes. I can still fly all of my digital quads, but I can’t get to FPV mode to update the firmware so I can bind to my brand new 03 air unit. Got a fix or any ideas. Much appreciated.

• 
  @NONSENSE_EXPLORER2 ай бұрын

  I’m not sure if I understood your problem correctly, but if I did: you need to turn on the goggles ( just the goggles ) and go to settings > about > aircraft model - and choose there the device you want to use it with. Then restart the goggles, bind it with the new aircraft as you have done with the previous ones and it should work 👍 Remember that if you want to use it with a different drone in the future you need to go there again and choose the right device again before binding it again. Let me know how it went.

• 
  @Arri.3 ай бұрын

  JB has done this on the new Avata 2 and it works 💪 🎉

• 
  @sandeepkumaryogi67373 ай бұрын

  I like you brother

• 
  @Seii-FPV3 ай бұрын

  I know this is an old video, but there is absolutely no explanation about what ViewFinder actually does and what are the scenarios to use it. Thank you so much for taking your precious time to explain it. Greatly appreciated!

• 
  @markhassing2353 ай бұрын

  In the settings the "channel mode" option is gray for me so I cant press it. how do i fix that

• 
  @dailydronejourney2 ай бұрын

  hi, its same with me. do you have solve that issue ? What is your goggle type ? I'm using Goggle v2 not goggle 2. please advice

• 
  @markhassing2352 ай бұрын

  @@dailydronejourney hi, yes i've found the problem and it was quite a stupid and simple one haha. The goggles must be connected to both the drone and controller and then the channel mode option is available so everything must be on and connected to eachother.

• 
  @dailydronejourney2 ай бұрын

  @@markhassing235 haha, are you serrious ? I think I do stupid thing like you.. I just power on the goggle and drone, the controller is not..🤣 Ok, I Will try as your suggestion.. thanks for your reply

• 
  @cesarango013 ай бұрын

  Quick question: If I wanted to use a geprc 915mhz RX with this radio T12(2.4Ghz), would I need to use a module? Thanks

• 
  @thecraftza3 ай бұрын

  Thanks a lot. I wish props came with direction indicators some how. especially BNF.

• 
  @monkeygutz693 ай бұрын

  More vids for Noobs! Thanx.

• 
  @LordRejion3 ай бұрын

  So I did this.. and wrong I'm sure. I went to another video I followed the steps.. and my menu stuff is different or missing... example.. like those little games. There gone.. What you showed us to Erase, is that just for the models? Or does that have other information in it too I guess I'm saying, did I break my radio LOL, and what does that mean break? I've heard it more than once. Do they literally mean break or is that a term.. ya I'm so confused. I did save those files we took off. Can I just put it back and start over.. or should I. . Sorry lots of questions.

• 
  @BergeronFPV2 ай бұрын

  Yeah this video will brick your stuff.

• 
  @alexcolvard94913 ай бұрын

  Does this process work for the ELRS and 4in1?

• 
  @kdobson833 ай бұрын

  New to Fatshark stuff, not to FPV. Good video. Very easy to understand. Process is pretty straight forward. Good stuff RotorRiot team!!

• 
  @gareth83463 ай бұрын

  Please help, I'm totally new to all this and I've just completely messed up my controller. I stupidity deleted all the files on the sd card without backing it up. Is there any way to reinstall the file? And where can I get them from. Otherwise I've just thrown £200 down the drain.

• 
  @BergeronFPV2 ай бұрын

  this video is out of date.

• 
  @oxazepamgeekАй бұрын

  If you didn't get them already, i'm getting a boxer in a few weeks, can email you the files.

• 
  @gareth8346Ай бұрын

  @oxazepamgeek thanks for the reply and offer, but I managed to get it sll sorted eventually. 👍