RadioMaster Zorro | How to Adjust Your Gimbals
Тәжірибелік нұсқаулар және стиль
Let's Fly RC is here to show you how to completely customize and adjust the gimbals on your RadioMaster Zorro Radio!
Purchase the RadioMaster Zorro here - rotorriot.com/products/zorro-...
Switch Diagram and Model Files - drive.google.com/drive/folder...
0:00 - Intro
0:26 - Tools Required
0:33 - Adjust Min/Max Stick Travel
1:29 - Friction and Self Centering
1:54 - Adjust Self Centering
2:54 - Adjust Stick Friction
3:58 - Spring Tension
4:26 - Remove Back of the Zorro Case
5:25 - Adjust Horizontal Spring Tension
6:35 - Adjust Vertical Spring Tension
7:46 - Reassembly
9:37 - Outro
Hosted by Let's Fly RC
/ @letsflyrc
Music by Vort3x
/ @vort3xfpv
Пікірлер: 9
I've been flying the Radiomaster Zorro 4in1 with Elrs Nano for about half a year now and one of my biggest headaches when getting started with it was unclear Zorro tutorials about the gimbal tensions. Luckily, my dad and I were able to get the stick tension to a point where I could be comfortable flying. Now my flights will be even better with perfectly tailored Zorro gimbals to suit my style. I've been diving into all of the older Rotor Riot videos and I love what you guys do! This is by far the best tutorial for the Zorro I have seen and I won't need to be looking any further. Thank you Shawn, for all that you do to make fpv more accessable and easier to understand for those just getting started!
@philhunt1442
3 ай бұрын
what are your preferred gimbal settings?
Hello,I put some Machine oil to my zorro right hand gimbal because it's not smooth at all but unexpectedly I was put about 5ml(millieters) on the gimbal right side and swiped it with a clothes,I think there's about 2ml(militers) goes through the gimbal to inside of the transmitter.Hence will it occur to short circuit on Zorro? Please reply as early as possible.
Hey! So I have you in front of approx. Ordered 1.5 weeks. Can't I put two ADDITIONAL 18350 batteries (because of the small size) in a printed case, solder a 2-pin USB cable on it, then feed the internal batteries from it until the external ones are empty, so that the internal batteries can continue to be used? 🤔 Or is the 7.4V (8.4V) voltage too high for the USB port?
@LetsFlyRC
10 ай бұрын
The zorro has a 3 pin port on the bottom and strap slots for an external 2s battery.
Can zorro 4 in 1 bind with flysky ?
@genericgarbagegamingchanne9466
Жыл бұрын
yes!
@DanielCValot
3 ай бұрын
Yes it can, it will bind with most all RXs
@K.D.valvi_
3 ай бұрын
@@DanielCValot okay 👍