Another great build from one of my favorite KZread PC builders. I have learned so much watching you. Looking forward to the next one.

@PCTechnician

2 жыл бұрын

Wow thank you I really appreciate it

So I finally put together my PC. Found an EVGA 3080 at MSRP and had a hero VIIi motherboard. A few differences but I figured it out. This video got me through the build. Thanks again for posting this. Great job. My PC runs beautifully.

Man I really enjoyed watching this video! The closeup slider shots and flow is really satisfying to watch. Keep it up.

Absolutly stunning! It's really meditating watching thesr kinds of videos, great job!

I did the same, moving the front fans all the way up in my 7000X build! :)

Probably the best PC build which I can refer to while building my own. Kudos!!!

Smashed it yet again, could watch you build rigs all day

Satisfação de assistir viu.. ta de parabéns 👏🏼

this is what im actually getting and the install video on the parts are clean and dope! Great build!

I was trying to decide on what case and set up to build next and this has helped a lot. Now to tweak my selection.

this huge GPU looks tiny in this case, amazing!

Nice build all the way around, Dark Hero is THE motherboard! Liked the cable extensions! Corsair stuff is great. Great job! AMD should give you a nice shirt to wear during your AMD builds, yeah?

Great stuff man, clean build as always.

Great photography. Great music. Clean building. 👍🏾

Amazing work as always, I think I will change my rog helios strix case in the future for either the 5000d or the 7000d because my airflow is not good thanks to the design of the helios strix case I mean my temps are okay but they could be better with a top tier mesh case like this one. Keep up the good work man 👍🏼

Thank you, I completed my build, but my tuf rx 7900 xtx is massive to fit in tuf gt502 and vertically is causing heat to mb, so I got 7000d. Your video helped me a lot😊

love watching the sick builds man

You made that look so easy lol. I have the 5000D and I thought that was big, the 7000D looks huge!

sick build 🔥🔥🔥

Amazing mate, in love with this build 🤍🤍🤍

Yay another montage, gonna take a seat, and enjoy the whole vid

I didn't know about the Universal GPU holder until I saw this video. Thank you.

Came across your channel and it is so satisfying to watch. It makes me want to start gaming.

Beautiful build as always

Superb! I will be building my first new PC for 13 years this weekend in this very case! It seems a bit over designed with lots of steel that doesn't need to be there, but it is still glorious! :) I think that's the same motherboard I ordered too!

@jwvdberg122

2 жыл бұрын

how did it go?

@Shadowguy456234

8 ай бұрын

Your story is similar to mine - I built one about 2yrs ago which was my first since the late '00s! PCs have changed a lot, haven't they :)

@Vormulac1

8 ай бұрын

@@Shadowguy456234 Haven't they just!

Totally gonna upgrade to this case for a upcoming alderlake hopefully HOPEFULLY rtx 3070 next spring. :)

@saab409

2 жыл бұрын

the time has arrived child. have you got the 3070

u sir have the art of making pc

It's not just the build itself is clean but also the way you built it. Excellent job as always.

wow, what a build. Only in a dream does this happen

Would love a detailed video of how to connect the argb lighting for a newbie

now this is a great casing...very very improved. i like the top radiator holding frame. good, so you no need to flex muscle holding radiator anymore

This is pretty much identical to the build I just specd out for my next pc. haha awesome to see it built.

I'm never gonna get used to itx builds without bays for optical goodness... I need my 3 blu-ray writers!

Thanks very much mate, late comment but I was mainly looking at the case and then you showed the MOBO I’m getting and I was worried it didn’t have a m.2 but after seeing it does I’ll be buying it

he is doing my cable management now.

Nice build, I´m waiting for my 7000D to arrive! This case is a monster! 👽👽

Great build. Your next upgrade should be a custom Water loop for it. Cooling GPU and CPU. I'm going to build one in this case soon. Probably when the new RTX GPU release

Que sonho de computador 👏🏼👌 Parabéns, from Brazil.

Love what you did to hold the gpu up from sagging

Great video, nice build, like the telescopic GPU support (thumb up)

Fascinating. Please show highlighting specs beside each individual parts while individual presentation.

Capellix Leds looks very nice an great build!

sublime combination

Live your vids man

It's just amazing !!! Love it !!

I am building my PC which has the similar components same as yours. This video helps me a lots. Thanks.

It was really joyful to watch u videos .

Great video. I was looking for someone who has built my same build I'm getting to do or very close to it and this is the closest I've found. I'm using same case (also black) and same CPU cooler. MSI mobo, i9 CPU, also using 4 sticks of RAM (4x32gb for 128 total), and an MSI 4090 RTX. Super excited to build it and this video will go a long way in helping guide me along.

this case llooks amazing to build in

great video keep it man

와 7000D 케이스 진짜 잘나왔네.. 메인보드 위아래로 케이블 구멍 뚫어놓은거며.. 등등 전체적으로 올 커세어 시스템 감성 아주 좋습니다. 최고.

@PCTechnician

2 жыл бұрын

감사합니다. 실제보면 겁나크고 무거워서 큰 케이스 좋아하시는분께는 좋을듯 합니다.

I love this video. Based on that, I built my dream PC. Many thanks for this video.

Awesome thank you!

How do you cable manage so well with so many wires? There were 3 fan hubs! Very impressive

Asm Build man came out pretty clean do another no rgb pls

This looks really nice! Could you possibly do a Rezension APU build with the duzen 7 5700g?

Now that is a bueatiful case. mind you , I already have the 5000D

awesome build!

Beautiful pc!!

Great tunes man

Great Job! 🙌💯

I just picked up the 7000X and built a really good pc for my older sister it packs an i5 12600K, RTx 3070 TI Gigabyte OC, 16gb 4800MHZ DDR5 a stunning z690-A,

Underrated

Cable management for the argb fans was a struggle for me it took almost 2 hours And all of that was without an aio as I'm using a tower air cooler

Beautiful build.

Wow love your video so satisfying

Have the same case and cooler, the h170i is quiet loud but it keeps my 13900k under 70c while gaming 😊

I don't like those big towers but you've done an extremly good job

@Graphics_Card

2 жыл бұрын

Uhh, those are what you see in almost every computer

@unknown81360

2 жыл бұрын

@@Graphics_Card uhm no

@Graphics_Card

2 жыл бұрын

@@unknown81360 so no atx mid towers are available in your country? That’s literally a normal sized computer

@korruption2802

2 жыл бұрын

@@Graphics_Card dude the 7000 is a very large case lol

@unknown81360

2 жыл бұрын

@@Graphics_Card the 7000D is a full-tower with a volume of around 80 liters... Definitely not what you see in almost every computer. Mid-towers are more common with around 40liters in volume. I personally own a Dan-A4, which is a SFF case with a volume of 7 liters, making this case absolutely gigantic in comparison.

great build :))) good components.

This is the exact build I’m going for. Not the Dark hero but the hero viii. It’s like KZread read my mind, or maybe great minds think a like. Thanks for the vid.

Please, more air cooled builds :D

와.. 이번 빌드 진짜 아름답네요..

@PCTechnician

2 жыл бұрын

오 감사합니다.

Beautiful build. Thank you for the great content!

Yes mom, I need this for school 👀

My dream machine, very nice build. Could you make detailed CPU/GPU thermal /noise review? Thanks.

Nice build! Do you have the AA code all the time? I have AA showing on mine after a bios update and wondering whether you can clear it?

Love this vid, i've brought a similar build to this just the 5000 series version. I can see that you didn't put the top dust filter back on, is that due to the fans being an exhaust or...

@PCTechnician

2 жыл бұрын

Correct

sick build! where have you been? almost a month dude

this is the exact build im doing but im having a noctua NH-D15 cpu cooler and lpx ram. plus ill have some silver cable mod cables. 😛

Just got one, the wiring is a little confusing for me...so trying to find a really good wiring video.. but the case is great so far temps on my CPU dropped by 7-10 degrees.

I love to watch these videos, and I wish I would build PCs for a living

@wa_music

2 жыл бұрын

you speak out of my mind

@aujuscrisper5528

2 жыл бұрын

Yeah sounds like the life

I just built my new PC using the case! I used RX 7900 XTX 24 GIG GPU with the Ryzen 7 7800X3D CPU!

wanna build this thing when all the prices total drop down to 3k, nice video

never clicked so fast to watch a pic build before lol

It's very helpful to me because I want to buy .. 👍❤️❤️🙏

Made it look so easy! I’m thinking about building my very first computer but the wiring seems complicated. Im scared to screw it up.

@dubbleplusgood

Жыл бұрын

It can get a bit hairy, especially first time. But a bit of planning and making sure you have all the right parts that are supported by each other will make it go smoother. Expect the assembly to take several hours when you're new. Heck, I'm done it many times and I still take my time, never rush. Watch a lot of videos ahead and check for ones using your specific case, psu, mobo whatever. Measure twice, cut once, is the best rule of thumb for most anything in life, especially tech.

@garbonomics

Жыл бұрын

@@dubbleplusgood built it about 6 months ago. This video among many was what I used to prepare. Went perfectly fine on the first try.

This vid sold me on the case and fan setup for my build. Curious could you not use the extra 3 case fans, that came with the case, up top to do a push pull on the aio?

@PCTechnician

2 жыл бұрын

You can do push & pull on the top

Really good vibes , love your vids. Can you do a build in the lian li o11 mini ? Thx for the content ❤

@PCTechnician

2 жыл бұрын

Wow. I just received the Li 011 mini from Lian Li. It will be next video. Edit: Lian Li is pushing release date to September so I'll upload the video on September.

@Ux0w_

2 жыл бұрын

@@PCTechnician thx ❤

This is basically the same as my build, just mine has a different motherboard and Strimer Plus RGB Cables.

Just dope

Parabens pela montagem, Montage+Music lofi= Perfect

i like this build very much because it is very non-rgb and very coool

Beautiful build, I have a question on your Formila Mod Sleeve did you buy two sets of this? why was 2 needed ? Just curious i want to get the same ones

@PCTechnician

5 ай бұрын

Yes I used two sets of sleeves as this GPU required three GPU cables.

Corsair's chase😊

Very nice video! To the point and delivers solid info. What was your intake/exhaust fan setup?

@PCTechnician

9 ай бұрын

Front fans are always intake, top & rear fans are exhaust

water-cool is the new standard

Should've spaced out front fans evenly to cover the whole bracket

Great build. Can you clarify which fans were connected to the back of the motherboard? I supposed only the chasis? And the AIO went to the commander pro? Thanks!

@PCTechnician

Жыл бұрын

Radiator fans are connected to Commander pro & systems fans are connected to Lighting node core.

@alexandergarciaponce7037

Жыл бұрын

@PC Technician thanks a lot mate 👍

I've been looking for some sort of support for my 3090 build, I'll give this one a go. Mind sharing what you did with your walls? Those panels look great!

@PCTechnician

2 жыл бұрын

Art3d Textures 3D Wall Panels White amzn.to/3hj8gsF

hello sir! i have some questions.. can i just put the corsair water cooler radiator on the front? and remove those stock fans and put them on top? thanks! great setup btw!

@PCTechnician

Жыл бұрын

Yes, absolutely