Building a futuristic energy boat 2 Electric motors
Ғылым және технология
Welcome to NASAT Channel!
I guarantee you won't be disappointed with the uploaded videos as there are some of the best videos that no one has done yet.
Thanks and hope you will enjoy and not be disappointed with your time spent watching my videos.
Support the channel by subscribing to see more great videos!
If you find it interesting, Like, Subscribe and comment on your questions and ideas, the channel will support and make great videos for you.
Пікірлер: 1 200
The total power of 2 motors is 4000W, the solar battery capacity is 300W. Boat runs from battery storage and solar panels load electricity when stopping, not running directly from solar cells! Tổng công suất 2 động cơ là 4000W, công suất pin năng lượng mặt trời là 300W. Thuyền chạy từ pin lưu trữ và pin mặt trời nạp điện khi thuyền dừng, thuyền không chạy trực tiếp từ pin mặt trời! Chế phi thuyền từ xốp sử dụng động cơ 570cc V-Twin Crafting boats from foam kzread.info/dash/bejne/dqKdpJJygru1Yqg.html
@hayatadairhersey1757
2 жыл бұрын
Can we write the dimensions?
@Andy-df5fj
2 жыл бұрын
How many watts are you running at full speed? How long does the battery last at full speed? How long does it take to recharge the battery with the solar panel?
@hailuu2000
2 жыл бұрын
Khoản bao nhiêu km trên giờ vậy
@vantruongnguyen1702
2 жыл бұрын
anh ơi cho em hỏi điều tốc đó anhua ở đâu vậy
@aikenPL
2 жыл бұрын
@@Andy-df5fj From the pure calculation looks like average lasting time is around 5min. Probably up to 10min if you are easy on throttle. I don't expect charging time to be less than an hour. Even if solar panel can deliver a lot of energy usually batteries can not charge as fast as discharge but of course it depends on type of cells. I'm curious how the reality is hopefully Sang can answer your questions.
Your projects style is simply extraordinary, it's quite rare to find people who dare to try and build such a unique propulsion system, amazing, don't ever stop.
@Nasatchannel
2 жыл бұрын
Thank you very much, I will try harder, hope you always support!
@mjodr
2 жыл бұрын
Very well said. Sums up my thoughts from this video and all the previous one's I have viewed.
@user-bv6yz4hy6j
2 жыл бұрын
Казахстан и Украина русская земля 🌎
@asus7117
2 жыл бұрын
@@user-bv6yz4hy6j Zaeball
Love that boat and how well you filmed the build making it clear for everyone what was happening - many thanks
đóng quả pin to đi du lich cả tuần luôn!!!!.. quá tuyệt vời
@Nasatchannel
12 күн бұрын
Cảm ơn bạn rất nhiều nha, có dịp mình sẽ thử
If you use a mold release agent, with the right draft angles, you could reuse the plywood mold again and again to form many boats with the same design. Love that hull shape. Excellent work!
@Nevir202
2 жыл бұрын
Ya, but I think the point of all this was just to make a video, neither the mold nor the boat appear to have been built to last.
@ltambrosekurt2
2 жыл бұрын
@@Nevir202 nothing wrong with re-usability, or maybe even selling 1 or two of these hulls
@Nevir202
2 жыл бұрын
@@ltambrosekurt2 Sure, but again, here the video is the product, so don't think he cared about anything other than fastest way from nothing to a boat he could record driving around in. It's probably already been scrapped.
@LoneBlackBear
2 жыл бұрын
I agree, excellent work! Better than most of us are capable of. I also agree you need to streamline it and strengthen parts and hide/protect your gear. Just some ideas that would take nothing to update. 1. When you screw into things, hit it and all attachment points with some kind of marine friendly filler. Holes in a boat scare me. 2. Make a removable cover for running gear, those zip ties aint going to like all the UV. 3. A front screen/spray/wind/fish guard would be nice. 4. Use some of those pvc pipes to line the edges so you can dock, hit stuff. 5. Extra seating? Bring someone along! 6. Molded in storage spaces/12v TV, fridge, WIFI, GPS, its all cheap and small. 7. Save your mold! Or at least incorporate it into the design, I see floaty bits being torn off. 8. Come to my country, start a business with me making river boats, we'll make big bucks. 9. Make full paper cut outs for your molds so we can not start blind. We'll pay! 10. Keep it up and continue evolving, I love the pace of going from gas, to electric, to solar, now go hybrid! Thank you for your work.
@Alrukitaf
Жыл бұрын
@@Nevir202 he looks like an experienced boatbuilder (at least fibreglass layups, and wiring up electric drivetrains), and no-one would spend the time effort and energy to produce an electric boat with solar panel and bilge pump, and then scrap it. He’s likely sold the thing.
Thank you for your wonderful videos. I've been interested in boat making for a few years and have been self-taught, and this video is always amazing. The electric type that charges with solar has long been admired, but it seems that it will not be damaged immediately due to the burden of electronic devices because stable power can be obtained by storing it in the battery once and then taking out the power. I also want to make a solar boat someday, because I do not know how long gasoline can be used due to soaring fuel prices
Three words for you: Absolutely Bloody Amazing!!! Thankyou for sharing your passion and your skills with us!
Simply brilliant... With stuff you can get anywhere, no 3D printing, no special tool... Very simple, the shortest way from A to B.... Love it
Cám ơn bạn đã tạo ra năng lượng xanh
You must have a fleet of about 30 boats by now. You should make a video showing all of them and talk about what went into building each one and what future plans you have for them. That would be interesting to watch. Keep up the good work.
@Nasatchannel
2 жыл бұрын
Thank you very much, I will try to do better, hope you always support!
I wish that this guy was my neighbor. His skills are freaking awesome. It'd be cool to have one of his electric boats to take out on one of the lakes in my area and run my rc electric boats around.
@b3owu1f
2 жыл бұрын
Build one. I actually am inspired to try to at least put together foam + fiberglass. It looks so cool. Not sure I could figure out all the motor stuff though.
@sharonbraselton3135
Жыл бұрын
You need. See chief eltric Bocelli rice icean
Quả thuyền năng lượng này thật đỉnh cao.quá chất lượng
Những ca sĩ khác cho mình cảm giác thư giãn khi nghe! Còn ĐP luôn cho mình bị cuốn theo tinh thần bài hát.
Gratuluje super pomysłu i super wykonania :)
Друг ты молодец, очень просто и в то же время сложный проекты, успехов тебе
@Nasatchannel
2 жыл бұрын
Большое спасибо, надеюсь, вы всегда поддерживаете!
Good idea,, hindi na need mag sagwan pa.. At hindi na need pa mag gasoline.. Pwedeng kayo gumawa ng pang rescue in case pag emergency.. At kaylangan matibay na at pumasa sa test and heavy duty.... Galing nyo...
Thank you for your wonderful videos.Your projects style is simply extraordinary, it's quite rare to find people who dare to try and build such a unique propulsion system, amazing, don't ever stop.
That is awesome I really like that hull design, looks like you got great speed with the v twin motor setup super cool! How long does it run for? And how long does the solar take to charge it?
*Thuyền chạy bằng năng lượng mặt trời quá tuyệt, tiết kiệm nhiên liệu*
@Nasatchannel
2 жыл бұрын
Cảm ơn bạn rất nhiều nha!
@sharonbraselton4302
2 жыл бұрын
solar cars síar rvs tó
Ảo tưởng! Bạn là những chàng trai đáng kinh ngạc. Lời chào từ Nga. Фантастика! Вы невероятные молодцы. Привет из России.
tuyệt vời quá cảm ơn bạn đã chia sẻ
I am impressed those hobby grade motors move the boat at those speeds. Imagine how fast it can be without a person in it. Make it RC just for fun.
That's really impressive for the size of the brushless motors it runs at a good speed. Very nice build. You have awesome skills, buddy!
@solderbridgelab4003
2 жыл бұрын
First thing I thought when the boat gets up to speed. I wonder how hot they get? Seem pretty small for amount of power the motors make.
@ericstarmer7779
2 жыл бұрын
The selfie-stick videos are definitely speeded up - the drone videos are maybe at true speed - maybe 12- 18 kph
@callmeweeee
Жыл бұрын
Its fake bro
E này kết hơp với thánh chế sẽ ra chiếc thuyền tuyêt vời
Chau oi ! Chau rat la gioi va thong minh chu rat la nguong mo chau. Chu cung rat dam me ve sang che nhung chu khong co nhieu kinh nghiem va khong gioi nhu chau. Chu mong la khi ve VN co the gap chau khoan 1 gio de chia se them chu nghi se khong lam phi thoi gian cua chau dau. Cam on chau
Maravilha, um. Grande projeto!! 👏👏👏👏👏
I love the boat projects, but could you please always list a top speed of each project in the video or description?
I liked seeing the two motors wired to the same ESC, I once wondered about this and asked my EE professor about it. Just as you demonstrated, he said if the motors are identical in design then they should in theory be able to function together as if they were a single motor on an ESC. Gotta love electricity
@sunnyfpv3694
9 ай бұрын
Also as you can see, both motors are tied to the same shaft ensuring both of them will run at exactly the same RPM
@johgude5045
7 ай бұрын
@@sunnyfpv3694 not only the rpm must be same, also the commutation angle. So all three phases line up perfectly. That is very hard to achieve. Better go for two separate controllers as this will always be more efficient
Hay quá . A nên kêt hợp làm ca no to chạy máy xăng nhưng dùng năng lượng mặt trời dùng tủ lạnh và máy lạnh cùng hệ thống chiếu sáng trên cano . Nó sẽ giúp bạn hiện thực hoá hơn những ứng dụng
Éste proyecto si que me ha gustado... no solo futurista.. muy realista...viable y muy ecológico!... QUE GRAN IDEA!! Felicitaciones y Gracias por compartir!!
@Nasatchannel
2 жыл бұрын
Muchas gracias, intentaré hacerlo mejor, ¡espero que siempre me apoyen!
@procorotiempo8413
Жыл бұрын
@@Nasatchannel Sir i like your idea ,Sir i ask a favor could you please send me a complete details about your DIY boat,thanks a lot. Stay safe
A nên thử lắp động cơ xe đạp điện có thể ổn hơn. Và phải làm hộp kín nước để bảo vệ mạch điện an toàn hơn vì môi trường dưới nước
*Rất hay luôn*
Trabalho incrível amigo 👏👏
@Nasatchannel
2 жыл бұрын
Muito obrigado, espero que você sempre me apoie!
I didn't think those motors would work so well, great job!
@sharonbraselton4302
2 жыл бұрын
yes they dó
Việt Nam mình cũng lắm người tài
Damn impressive!!!!! I wasn’t expecting the boat to hit those speeds!
Очень интерестный проект, главное на такой скорости и с таким углом расположения солнечной панели не отправиться в космос
Jakiej mocy są silniki ekrktryczne,i jaka prędkość osiąga łódka? 👍😀
nên đăng kí thiết kế, và sản xuất hàng loạt. có thể tăng cường thêm 1 tấm pin và gia cố khung để giữ tấm pin chắc chắn hơn. đây có thể là thiết kế tương lai 1 năm nữa.
Bạn quá hạnh phúc khi được sống với đam mê
Could you provide drawings, specs, and range for your configuration? It's amazing what you've done
Brilliant build! Maybe raise the solar top a little for easier access!?! great stuff! thanks for sharing!
@Nasatchannel
2 жыл бұрын
Thank you very much, hope you always support!
@reijohyvonen3915
2 жыл бұрын
Everything is perfect. Roof height, angle of roof, hull shape, economy, motor size, motor location vs belt drive, belt drive power loss, belt tighness, etc.. etc.. I think at the way of build of this tells only for huge experience everything. It tells also for trying and trying to do similar boats. Thanks for sharing!
2 con motor 3 pha công nhận khỏe thật Bữa sau bác chế môtor bằng xe đạp điện 1500 w chậy thuyền xem
Thuyền đẹp nhìn thích quá bác ơi 😍
Beautiful work. Can you post a link to where you got your pulleys shaft and belts please. Thanks. Again amazing job. Motivated me to start my own solar boat.
@rakim126
2 ай бұрын
Diy boat building is so fun!
Anh có thể cho em xin thêm tài liệu cách chế tạo nguyên lý hoạt động của cái này được không ạ,em muốn tìm hiểu và đưa nó vào đồ án Bách Khoa
The top speed from those two little brushless motors is mind blowing!!!
I am amazed and fascinated by your build ingenuity! Of course, the construction is sped up, but your skill and ability is hard to surpass! I am I'm in wonder at what you do!! Keep up the good work, and keep up the good work!
Quá ấn tượng anh ơi
@Nasatchannel
2 жыл бұрын
Cảm ơn bạn rất nhiều nha!
С такой крышей это уже почти экраноплан!👍
Fantastic build. They look like modal boat motors but you were flying along. Well done.
I made a solar powered floating dock/barge 20 years ago floats from home depot - 36 volt minnkota electric motor - 400 watts of solar on the two bench seats - it went slow, but was awesome for fishing and hauling stuff to my island! This build is BRILLIANT - that motor setup, creating the boat….where did you learn all of that!!???
@sharonbraselton4302
2 жыл бұрын
hasd 12 fur games fußh 36 on trying ukengung maximum oiwer 360vwattsc400 watts unkitedd rang
@sharonbraselton3135
Жыл бұрын
Yes unlimited range 36 pound. 360 watts naxoiu. Energy
Thank you friend for sharing an extraordinary design as an alternative in the very near future to traditional fuel boats, just as it is happening with electric cars.🥇🥇
@Nasatchannel
2 жыл бұрын
Thank you very much, hope you always support!
@sharonbraselton4302
2 жыл бұрын
oresvyv1500vyradrßctooc5100vyears one 10000 yras fusé guess bist ègvry bstrrsç
Muito top
nên sài chân vịt tự gấp lại khi dừng và có mốc cắt gát nhé loại mốc cắt gát day lươi nhỏ ấy ...
@user-wf7qp3hn8s
8 ай бұрын
vẫn rất hữu ích..
👍💐🏆🥇. Chúc bạn luôn có nhiều sáng kiến mới và luôn thành công trong sáng tạo.
Gostei demais do projeto amigo. Ficaria grato se fizesse um vídeo com mais detalhes sobre a construção do barco. Queria fazer um igual.
@Nasatchannel
2 жыл бұрын
Muito obrigado, eu vou fazer isso, espero que você sempre apoie!
@nettofonseca9439
2 жыл бұрын
Deve ser um pouco caro aqui no Brasil, porem deve ser legal de se construir. Compesado 3 milímetros e fibra de vidro. So aconselho a reforçar o casco. Talvez eu construa um também.
@marcia2095
2 жыл бұрын
@@nettofonseca9439 , assista ao Professor Pardal Brasil. Nao o vi fazendo Barco, mas ja fez muita coisa com sucata. Ate carro movido a vapor.
@brunob.7792
2 жыл бұрын
Os bolsonaristas que você atende nos pontos turísticos aí, não vão deixar você colocar isso pra atender eles. Vai contra as diretrizes das companhias que eles trabalham.
great, love your work!!! i think a few of us would like to know what glue you are using please?
@Nasatchannel
2 жыл бұрын
I used polyester resin glue Thank you very much, hope you always support!
Даже смотреть на сам процесс изготовления такой лодки приятно. И да, я не отказался бы от такой лодки для летних прогулок по местным речкам и ерикам.
@sharonbraselton3135
Жыл бұрын
Chief ev boats river ocean
give this man a design award
Excelente dia, tarde e noite. Achei seu projeto excelente, estou fazendo um para mim, por gentileza poderia me passar o modelo desse motor que você usou, e todo esse esquema elétrico? Iria me ajudar muito. Ficarei muito grato se poder me ajudar. Fico no aguardo. BRASIL- SÃO PAULO CIDADE DE SOROCABA.
you just realized my dream 👍👍👍👍👍
@Nasatchannel
2 жыл бұрын
Thank you very much, hope you always support!
I honestly didn't expect it to go that fast. Great job, I want one...lol.
Thông minh quá, sáng tạo tuyệt vời
Super awesome 👏
@Nasatchannel
2 жыл бұрын
Thank you very much, hope you always support!
Hello, it's seriously a great project !! Could you send me the reference of the motors ? I wonder how powerful your boat is
I don't know if it was it plan or not, but then boat faster go than less resistance it meet. The solar panel in addition to charge the battery creates a lifting force for the boat to get lighter and put less pressure on water. Great construction!
How are you able to drive it without smiling? I would have a huge grin after building something so awesome!
Клёва👍
It will be great if you can list the electronics that you used in the project. Size of the Bl motor, ESC, battery, gears and propeller size. Thanks
@muhammadharits586
2 жыл бұрын
agree.. you should re-upload the vidio with listed as my buddy wrote upside..
@pauldunn7000
2 жыл бұрын
I would love to see the motors that are defying physics.
@krisbergin8628
2 жыл бұрын
@@pauldunn7000 i was looking for this comment. why did they cover up the brushless motors? they added an extra large battery under the driver seat. why use the two lipos then? i call B.S
@georgestfd7148
Жыл бұрын
@@krisbergin8628 wondering for that too.
Now that's the kind of boat the people need, build more boats and make it an income and also thank you for giving this technology to the world , keep it up, congratulations!
Amazing project.. Good speed, impressive.. Love from India 💖💖
Com todo respeito ao construtor do barco e seu modo inventivo mas é muito improvável que ele tenha de cabeça todas as formas de construção e encaixe perfeitamente. Algo me diz que existe uma grande equipe de apoio por trás. O resultado é muito bom. Só não pode esquecer das horas e ter que passar a noite no meio do lago.
@cloudview4220
2 жыл бұрын
What do you mean. What part of the build do you question
Tenho muitas duvidas nesse milagre todo só com a energia do sol . O certo é listar todos os equipamentos que foram usados na propulsão do barco como potencia da placa , motor , baterias e controlador de carga
@cloudview4220
2 жыл бұрын
I agree
@kotnapromke
2 жыл бұрын
Its not solar boat. Its batery e-boat.
I love these videos. Also how it's done at home with basic tools. If you happen to have time, make a list of the electronics components etc so we can make our own without too much hunting. Thanks.
You've inspired me to create my own boat and I barely know boats haha. I don't know all the components you used in there. Does anyone have a complete list to do something like this on my own? Beautiful build my friend great work! Sir, if you have a complete component list you could send me that would be AMAZING!!!! Thank you again for the inspiration!
Более поразительный факт, что она склеена с помощь обычного суперклея 🤣
Deveria colocar a venda no mundo inteiro
@helderfutre4642
2 жыл бұрын
Awesome boat which, an IKEA style, could make it explode into a new tool pleasure era for the water adventure lovers... Best wishes going into the next level.
Muy ingenioso facil de construir lo felicito por saber utilizar energías,
Rất tuyệt vời sáng tạo hay thương mại đi bạn mình thích quá bạn❤
@Nasatchannel
2 ай бұрын
Cảm ơn bạn rất nhiều nha! ❤️❤️
Great project! However, my extensive experience with photovoltaics tells me that a polycrystalline panel could produce a maximum of 10-15W in a specific weather, which is not enough to drive two motors with regulators. In this case, only the capacity of the charged solar battery was used. The photovoltaic panel only slightly and insignificantly charged the battery through the MPPT. This does not diminish the idea of the project, because these things really work as long as the parameters are met.
@stonyfieldmotorsports
2 жыл бұрын
Thats probably about 300 watts of solar, plenty to charge that battery throughout the day.
@DL-kc8fc
2 жыл бұрын
@@stonyfieldmotorsports Za jeden jasný nebo polojasný slunečný den dokáže tento polykrystalický panel vyrobit 0,6 - 1,2 kWh elektřiny - žádný problém. V této situaci (vybíjení motorů) a počasí (slunce za mraky) však příspěvek z panelů není významný - polykrystalický panel v této situaci (slunce za mraky) produkuje maximálně 15W, což v celkové spotřebě cca. 2x300W a více je úplně ztraceno. Energii tedy dodávají především baterie, které nedostatkem energie z panelu rychle ztrácejí kapacitu. Daleko lepší by byl projekt se stacionární nabíjecí fotovoltaickou stanicí na břehu potoka s několika solárními bateriemi. Baterie by byla připojena pouze k jízdě lodí (bez fotovoltaické střechy). Mohl by to být dobrý rekreační podnik...
@BrianRoddaDesigner
2 жыл бұрын
I wonder where he hid the gasoline motor?
@DL-kc8fc
2 жыл бұрын
@@BrianRoddaDesigner :) It doesn't have to have a gasoline engine. A fully charged 100Ah solar battery (most often gel) can really handle it. :)
@Miodowski
2 жыл бұрын
Hi Valen, I don't think you really have experience in PV. I'm renewable energy professor in university, actually there are pv panels up to 600w, this specific pv is 300w, it is not providing energy directly to the engines, it is just charging the battery, it is the battery that works as a buffer what is powering the engines.
Hi I've seen several videos of yours and you are amazing. Also you use a glue that sticks absolutely everything (white little bottle). Can you tell me what it is and where I can order it? Thanl you
@Nasatchannel
2 жыл бұрын
I used quick-drying metal glue to stick everything in place, as the name of the glue differs from country to country. You can find them at your supermarket, Thank you very much, hope you always support.
Tuyệt vời trên cả kỹ sư
Nice electric tunnel boat design good job!
sea fishing boat😁 Thankyou..Nice bro👍🏿👍🏿👍🏿
a good design, only defect the roof is against the air flow(slow the ship down)
Respect your passions building fast electric boats... may one day the fortunes is yours
Parabéns, ficou top. Poderia especificar o material e componentes usados e onde comprar...
Tuyệt vời👍
Điện mặt trời thì dùng động cơ 24v hoặc tạo dinamo kéo điện 220 phục vụ motor 1 pha, motor 1 pha sẽ kéo lại dinamo và sinh ra điện để kéo 1 motor 1 pha khac nữa thì bạn sẽ không cần đến tấm pin năng lượng mặt trời mà vẫn có thể du lịch vòng quanh thế, dù sao cũng là sự sáng tạo, good job bạn
@sharonbraselton3135
Жыл бұрын
Buy. Aqawatt 848 twin carbon 2 baters 124 Mike's teksa cels 143 mioe or 71 mile rsnge
O cara é um gênio ....parabéns pode colocar pra venda em escala que vai vender muito
Just simply amazing 💞👍👌Good work of Art. Very stylish 👌
สุดยอดมากครับ เก่งมาก (from Thailand)
Tuyệt vời mình nghĩ tấm pin này công suất 440W 2 động cơ chắc tầm 300W - 350W và thêm 1 bộ lưu trữ pin 1kg nữa là đủ xài. Chắc vận tốc tầm 35km/h. Cái này lắp được 2 tấm pin nâng công suất 2 động cơ gấp đôi thì ngon à. Chúc mừng bạn.
@sharonbraselton3135
Жыл бұрын
Do it
Beasutiful craft, I'm always so happy to see what you good people come up with next, this is a brilliant design and cuts the waters beautifully, good work, I want one too! Cheers from the PNW Canada! Peace Works!
@vuNguyen-pz4fq
4 ай бұрын
Hi tks you
Mong rằng lần sau đc xem anh chế động cơ phản thủy lực
Impressive. The only thing I'd change is I would install the solar panel level, so that it got the same power irrespective of your direction. Also probably better aerodynamics.
@opticmanz
2 жыл бұрын
raise the back and you get more headroom too
Awesome! I want to do something just like this for Florida and putt around the intercoastal str8 chillin.
Asian people are the smartest people on earth !!!
ước mơ lúc bé, giỏi thật đấy