Nếu bạn thấy thú vị, thích, đăng ký và nhận xét về câu hỏi ý tưởng của bạn, kênh sẽ hỗ trợ và tạo ra các video tuyệt vời cho bạn! Chế phi thuyền điện từ xốp sử dụng Motor 6000W | Build a boat from electric 8hp foam kzread.info/dash/bejne/fKB-15iTZqyaXdo.html

@kotrpa4377

Жыл бұрын

Дла таких типов привода винта надо делать тоннель мерт 1.2 метр 1.5. Типа катомаран с саединенным носом а также меньше двигатель с вареатором классно 😁

@sunaryo_mursalie_satam

Жыл бұрын

Coba Buat perahunya berbentuk mobil Seperti jet car Pasti tambah unik

@hajimuda2185

Жыл бұрын

Lyjykp0nbbbuang

@ngoctrannguyenthi5206

Жыл бұрын

Có bang không ban

@user-hy3pu7xc6s

Жыл бұрын

Рускийку

I'm very impressed how everything was engineered from basic raw materials! Also excellent video and camera recording. Thank you for your hard work!

@Nasatchannel

Жыл бұрын

Thank you very much, I will try to do better!

@dikiyVolk82

11 ай бұрын

Класс💪💪💪💪👍🤝🇷🇺

@larou14

9 ай бұрын

What a magnificent boat, built entirely by hand, you impressed me and the result is superb. You really do great things with things you already own. Well done young man! 😯😉

Việt Nam thật sự rất giỏi , chẳng qua dân chưa giàu nên ko nhiều người có kinh phí để thỏa sức sáng tạo mà thôi

@assassinforex6240

Ай бұрын

Giỏi nhưng vẫn nghèo 😂

@anhuchoang8832

4 күн бұрын

K phải k đủ kinh tế mà luật pháp k cho phép thông minh hơn, giỏi hơn là đi buôn muối

As someone who built competition race boats out of wood and fiberglass in the 70's and 80's, this was very impressive.

@sadelisadeli8365

11 ай бұрын

😊😊

No stopping this guy. if he needs a piece he'll just whip on up . Fun to watch him go at it and then like magic its a boat. Good Job

@Nasatchannel

Жыл бұрын

Thank you very much, I will try to do better, hope you always support me!

Tuyệt vời một sáng tạo rất hữu ích, loại bỏ bánh lái ngoài và góc lực đẩy chân vịt tùy chỉnh giảm lực cản tăng tốc độ và tiết kiệm nhiên liệu, rất Tuyệt vời

Tôi không thể tin rằng anh chàng này đã xây dựng như vậy trong hiên nhà của mình! ...... Tôi bỏ mũ và chào bạn từ Argentina

Молодцы ! Я на такой лодке уже 5 год хожу , тоже сам сделал , с таким же валом . Привет из России ! 👍

@PEKAT_boats

Жыл бұрын

Вы можете сделать на заказ такой привод арнисона?

@Vvs79

Жыл бұрын

@@PEKAT_boats могу , но на продажу не делаю

One of the most irritating things about KZread is reading the commentary. This man goes out of his way to build a boat to the best of his ability. Then the experts come out of the woodwork and have a comment about everything. You could have done it this way you could have done it that way. Meanwhile they probably never built anything in their lives a lot of dreamers out there with no money. They want to buy everything and they want to know how much everything cost but they don't have any money to buy it. They don't even know what part of the world it's located in. It could be 6,000 miles away from their homes They don't even take that into consideration about how much it's going to take to ship the item. Today location no common sense anybody who has the money and wants a custom boat all they have to do is find the shop in their area and have one made if they have all that cash then it should not be a problem.

@namarhodge568

Жыл бұрын

Amen my friend, people are like the armchair quarterback. Never done any thing in their life, but are experts on every thing. This guy did a fantastic project, and made a very good video doing it. He made it look simple, quick, and easy. This guy is very skilled, and has the imagination it takes to devlope a project and see it through. GRATE PROJECT!!!!, GRATE JOB!!!!

@ichigo5050

Жыл бұрын

Your Right 🙏♥️ Amazing Skills of this man nice content

@Mr.Robert1

Жыл бұрын

@@namarhodge568 Thank's for seeing the truth and not attacking my opinion. Something that I normally have to deal with. LT Rob United States air Force retired.

@Mr.Robert1

Жыл бұрын

@@ichigo5050 Thank's for seeing the truth and not attacking my opinion. Like I normally have to go through on KZread. LT Rob United States air Force retired.

@Mr.Robert1

Жыл бұрын

@@namarhodge568 Armchair quarterbacks, that one I never heard before. The one that I've been using my entire life has been "Sidewalk Supervisors" as so many times I would see a group of men working busting their ass and then somebody would come over and start to give them advice. Like they really want to hear it.

Parabéns pelo esforço ! Ficou linda a lancha ! 👏👏👏😉😉😉🇧🇷🇧🇷🇧🇷

Вот она гейропа посмотрело видео больше 1 миллиона а лайков 10 тысяч ты парень талант! - Инженер, удачи тебе здоровья и фарта из России!!!

@Boris_printmaker

Жыл бұрын

Ну, вот и Kрейсер "Москва" отметился коментарием. У вас там как дела с моГилизацией, все нормально? Ты уж о гейропие не безпокойся. Счастливого Двухсотия тебе и всем твоим, груз милинкий.

@HUNGtran-wt7tm

Жыл бұрын

Welcome to Viet Nam

@user-pl3kq3vt3p

Жыл бұрын

@@Boris_printmaker не Переживай Борька мой дед всю войну прошёл отца застала и меня ты молись там ты уже давно груз 200 просто это не осознал а наше дело ПРАВОЕ фашизм давили и давить будем слава Русскому солдату и смерть поганой бандере веть есть же нормальные парни призыв идёт жди баклан идём к тебе костьми ляжем за то чтоб в наших домах был свет и газ и настоле еда и чтобы вас ублюдков небыло Слава Путину он настоящий человек преданный своей Родине не то что вас наркоман зеля продал вас всех а вы как подстилки хотя вы ими и были всю историю ты ответил не тому кому надо баклан...

@brozer1326

Жыл бұрын

@@Boris_printmaker а ты чем гордишься недобыток? Главным полицаем, который крашенных собак продавал или азовцами которые иконы жгут или может наркошей с 95 квартала или его бабой которая тратит миллионы по парижам и лондонам? А? Ты думаешь вам весь мир помогает,да? Так прозревают уже , или ты думаешь они не знают про их оффшоры? Бывай, пока еще не двухсотый. А вообще не нужно желать другим, чего себе не пожелаешь, примета такая. Если ты думаешь, что тебя по старости уже не призовут и выживешь, так на обольщайся, карма она для всех ублюдков одна

Quá giỏi hơn cả kỹ sư và tiến sỹ của VN

Bloody good job old mate ,I've built a few boats myself even living on one now. Did the same set-up as you no gear box. Just shows what can be done. 👍from Australia

@funguy7218

Жыл бұрын

Hey man, Im planning on doing something similar with a 14ft Fletcher and a 1.1 rover engine. Would you recommend direct drive over a gearbox?

Projeto lindo muito bem feito queria eu ter essa sabedoria e estrutura financeira para fazer um desse muito top Deus abençoe vocês 🙏 parabéns 👏

Great job! Love the way you cut the plywood almost by eye, to produce a hull profile that just works so well. A couple of safety concerns, though.. 1. that fuel tank? If it comes adrift or splits, you might just incinerate. 2. The steering arrangement needs some extra cable unions.. if one let go while at speed you could get flipped pretty quick. The engine seems to be operating at a good temperature, but you should probably check the temp. of the water at the outlet. If too cold, your motor won't last. Regulating the temperature is easy on a system like this: if running too cold, restrict the outlet to slow water flow through the block. If running too hot, install a small scoop at the inlet to help force water through the block. Adjust the scoop size until you get the outlet temp you want. I hope I don't sound nit-picky... because your build is great, I am so impressed (and inspired... I have a Jag XJ6 motor I'm wondering what do with). I'd just like to see it even better: reliable and safe.

@ct1762

Жыл бұрын

isnt the actual temp of the cyl head what matters? for an outboard (2 stroke anyway), indicator water temp means absolutely nothing.

@Nasatchannel

Жыл бұрын

Thank you so much, I will try to do better!

@josepeixoto3384

Жыл бұрын

jag 6 cyl 4.2? too too heavy,forget it

@ct1762

Жыл бұрын

@@josepeixoto3384 yeah any iron block 6cyl and bigger is gonna be way to heavy.

@CaptainCrunch4817

Жыл бұрын

Very good points youve shared with these gentlemen. You read like a very smart man indeed! I thank you for your input, and will keep it in mind if I ever decide to do something of this nature, either on the water or on land. Thank you again.

Не устаю удивляться, ребята, вашими работами👍👍👍. Спасибо за видео- вдохновляет. Надеюсь на скорое посещение моего любимого Вьетнама.

CHỦ NHÂN CHẾ BỘ TRỤC LÁP ĐẲNG CẤP ĐẤY, TÔI ĐÃ TÙNG CHẾ NHƯNG THẤT BẠI VÌ KHÔNG CÓ MÁY TIỆN SẮT , LUÔN ỦNG HỘ KÊNH.

Espetacular esse projeto ficou fantástico coisas assim .que me inspiram a continuar sonhando com projetos futuros de professor pardal abraços.continue construindo projetos e conteúdos espetacular ares saudações brasileiras .🇧🇷

Sou brasileiro e sou seu seguidor por que adoro suas artes,,, são ótimas,,,, parabéns

Thêm ca bin nữa là y như du thuyền chúc mừng bạn đã chế tạo thành công quá đỉnh

Simple, practical and elegant. Few know what it feels to be able to build something completely with your own hands. Congratulations to the 👷‍♂️.

За табой давно наблюдаю, очень хорошо и понятно всё делаешь. Молодец 👍👍👍. Большой привет из России.

@Nasatchannel

Жыл бұрын

Большое спасибо, надеюсь, вы всегда поддерживаете меня!

@alex94015

Жыл бұрын

@@Nasatchannel да я всегда ставлю 👍👍👍лайки

@ramlantrimban512

Жыл бұрын

Mntapppp 👌👌👌👌👌

Сделать такое - моя мечта. В России такая лодка по цене как хороший автомобиль

@Nasatchannel

Жыл бұрын

Большое спасибо!

@user-hb9ot1mq6r

Жыл бұрын

Сам с России с Урала и удевляюсь смекалек привет

@user-nw4ck4eg2o

Жыл бұрын

@@user-hb9ot1mq6r такие давно делаются в РФ.Самоделки.

Very nicely done. Built by a very smart young man and possibly his Dad? I'm very impressed by his design. Great job sir.

Bạn đúng có tài thiệt sự.phế liệu mà biếng nó chạy dc là quá sức với mình rồi.🍻🍻🍻

Excelente trabajo y muy potente esa lancha, saludos desde mexico.

Настоящий изобретатель, большой мастер - золотые руки! Удачи в жизни! Почему без помощника- одному это тяжело наверное.

Отличная работа!!!❤❤❤ РЕСПЕКТ ОТ ДУШИ.

Phong cảnh đẹp và một chuyến thuyền tuyệt vời 👍👍

essa forma de fazer o molde do casco em compensado comum é uma arte, me abre a mente para varias ideias, muito bom mesmo, continue trazendo mais videos assim.

@Nasatchannel

Жыл бұрын

Muito obrigado, vou tentar melhorar!

@kevintran7763

Жыл бұрын

@@Nasatchannel hoàn thành tầm nhiêu tiền bạn làm bán ko

Parabens meu amigo. Voce merece nota 1.000, para não falar em 1.000.000 em criatividade. Continue sempre assim, nos proporcionando novas visoes de possibilidades possiveis . Saudaçoes brasileiras.

@Nasatchannel

Жыл бұрын

Muito obrigado, vou tentar fazer melhor, espero que você sempre me apoie!

สุดยอดมาก จินตนการของคุณในการสร้าง สามารถอ่านระบบการทำงานของมันได้ดีมากๆ ไม่ว่าจะเป็นการติดตั้งอุปกรณ์ส่วนประกอบต่างๆ สมบูรณ์แบบได้เฉียบมาก คุณเก่งมากครับ

Bạn làm thuyền đẹp khéo tay quá

Perfeito, lindo demais 🇧🇷

@Nasatchannel

Жыл бұрын

Muito obrigado!

This is amazing to see how you built the boat. I don't know how fast it will go. It looks like a good boat for shallow water. However, being a boat captain myself, I can see a lot of disadvantages to this boat. I don't see any cleats on the boat. What if you wanted to tie up or anchor? What if you needed to give another boat a tow. How do you walk around in the stern? It looks like you need a excavator to put it in the water. It doesn't look like you could pick it up with davids. What if you needed to get a tow from another boat? How would you do that? Anyway thanks for making the video. I enjoyed watching it.

Trên cả tuyệt vời anh bạn mình ơi , đỉnh của đỉnh . Chúc anh thật nhiều sức khỏe và thành công trong cuộc sống.

Bạn rất khéo tay và sáng tạo, cảm ơn bạn đã chia sẻ, chúc bạn thành công hơn nữa, luôn ủng hộ,

You don't see a lot of surface drives around my side of the world. Great way to reduce drag and pick up speed. Another great build, sir.

@Nasatchannel

Жыл бұрын

Thank you very much, I will try to do better!

What a magnificent boat, built entirely by hand, you impressed me and the result is superb. You really do great things with things you already own. Well done young man! 😯😉

VN ko thiếu nhân tài,, tuyệt vời,,,

good ! 멍하니 끝까지 보게되는 영상 입니다. 넘 멋지고 훌륭한 기술을 가지셨네요... 당신같은 분이라면.... 훗날 지구에 위험이 닥치게되더라도 노아의 방주 도 만들수 있을것 같아 보입니다

Думаю что автор скоро начнет готовить корабль для космических путешествий...... Молодец однозначно!!!!!!!!!!!!

Захотел покататься на лодке,придумал, сконструировал, изобрёл немного труда и ума.Классная лодочка получился! Ура...

@Nasatchannel

Жыл бұрын

Большое спасибо!

Really love to watch this guy build a boat from scratch has great ideas thanks for sharing your video very interesting 😊

After your hard work and precise plan,when the boat speeds in qater splashing the waves its amazing. The recordings are superb.👍😊

Sensacional! Lindo barco!

Awesome idea !! I enjoy to see your boat so fast and stable on the water….😊

@Nasatchannel

Жыл бұрын

Thank you very much!

OK ở VN luôn á ! Khâm phục ý chí của bạn !

@Nasatchannel

8 ай бұрын

Cảm ơn bạn rất nhiều nha!

My life is simple. I like to build things and I like to watch other people build things. Great job!

Show de projeto, muito top mesmo!

Another great build! What is the red coating painted onto the wood? I want to build a boat using this type construction and I like how the wood releases from the fiberglass.

@Nasatchannel

Жыл бұрын

I put a layer of wax nonstick on the wood and then applied a red gelcoat polish

@The_Cat_Princess

Жыл бұрын

I was wondering, thank you for listening

wow ganda nice talaga god bless idol ingat

@Nasatchannel

10 күн бұрын

❤️❤️

Bạn có những sáng tạo tuyệt vời

Quá đỉnh, hóng bao lâu nay cuối cùng cũng đã được xem tuyệt phẩm

@Nasatchannel

Жыл бұрын

Cảm ơn bạn rất nhiều nha!

@dungphamhoang3637

8 ай бұрын

Chị phí đóng 1 chiếc nón bảo nhiêu vậy ad

I really like your content bro, it really inspires me to make a ship that is exactly the same as yours. greetings from Indonesia🇮🇩✌🏾

@Nasatchannel

Жыл бұрын

Thank you so much!

Wow I wonder if a houseboat with that kinds of engine can go that fast. Hopefully you guys did a walkable houseboat and take it out for a fun ride.

Muito bom , muito proveitoso seu trabalho , parabéns,ficou maravilhoso, top demais. Deus te abençoe!

@Nasatchannel

22 сағат бұрын

❤️❤️

By far, your best effort so far, an impressive design and execution!

@Nasatchannel

Жыл бұрын

Thank you so much!

Muito bom gostei show ótimo trabalho ficou top

Интересно а если бы у них были современные технологии. 🤔 Просто молодцы.👏

A good looking design! When making the plywood mould you made it look so easy. That is very difficult to do but you did it so easily. Keep up the good work!

@Nasatchannel

Жыл бұрын

Thank you so much, I will try to do better!

I often considered using car A frames mounted to transom with the CV Axle and bearings still in tact. Attach propeller where hub would normally go and the suspension travel would provide your trim up and down. Your knuckle would still provide steering

@Nasatchannel

Жыл бұрын

Thank you very much, I will learn that!

Thành niên có đam mê chế tạo. Là đỉnh thời nay.

Отличная работа, мастер!!!! Лайк!

Beautiful boat sir! I live in Thailand and this would help greatly during floods. What is red stuff you use on fiberglass? Is it just paint or special glue?

@Nasatchannel

Жыл бұрын

Thank you very much, it's gelcoat

Wow! 🤩 Amazing project😎✌️ Max Speed of this boat?

Bạn làm quá đẹp nhưng nếu bạn làm vô lăng và khoang lái đẹp hơn thì hoàn hảo

Bravo, bro! Làm thêm cái kính chắn nước nữa là thành 1 canoe chuẩn rồi.

This is an awesome work! I never saw this type of propeller before. When youtube pays you, make a more confortaeble seat and interior side and a new video! I would like to watch it! 😆

@Nasatchannel

Жыл бұрын

Thank you very much, I will try to do better!

@ericsmith-gs8po

11 ай бұрын

Bro your very talented bare bones boat love the surface e drive engineering

Very creative. I would buy one of those

I love the simple ingenuity as well as Camera work ... GREAT JOB!!!

@Nasatchannel

6 ай бұрын

Thank you so much!

Amazing work, awesome idea, great skills. It is so relaxing to see this build. Keep up the good work.

@Nasatchannel

6 ай бұрын

Thank you so much

Excelente Maravilhoso Super

@Nasatchannel

Жыл бұрын

Thank you very much!

Waw the best boat fishing nya 😍👍👍

@Nasatchannel

Жыл бұрын

Thank you so much!

A true craftsman 💯👍

Rất sáng tạo và giỏi. Cháu nên tổng kết tổng giá thành cho mọi người biết để đánh giá về hiệu quả vì đó là thước đo thành công của sáng tạo hay phát kiến.

WOW! Look at how slow the prop is spinning and all that water gushing out! Amazing engineering! Now THAT is what I call efficiency :)

Awesome Beautiful Boat My Friend 🙏🙏🙏🙏🙏🙏 You are a true Genius 🙏🙏🙏🙏🙏🙏🙏🙏

Молодцы!!! Рукастые ребята!!!

Sớm nhận nút vàng em trai ơi

@Nasatchannel

Жыл бұрын

Cảm ơn anh rất nhiều nha!!

Great job. Congratulations for your hard word but needs some more ideas like: 1)blob on the steering wheel. 2) Trolley for transporting the boat to the riverside. 3) visor in front of the dashboard. 4) Outboard engine available especially for such boats. Only then it will have a professional looks and finally he can start a boat building business on a small scale. Keep it up. With much love from India 🇮🇳🌷

@fazili4192

Жыл бұрын

Hahaha you out of contact with this YTber

Amazing engineer for a car engine use in boat wow super bro love respect from balochstan 🇩🇯

@Nasatchannel

3 ай бұрын

Thank you so much!

Excelente trabajo, felicitaciones.

Beautiful boat, very graceful looking, and FAST TOO!

Yes, that distance is safer... Awesome work! Good soundtrack too!

Backyard engineering at its finest. Totally amazing!

@Nasatchannel

7 ай бұрын

Thank you so much!

Perfeito, Parabéns Jovem !! Você é muito talentoso !!

Quá tuyệt vời 👍

Bravo NASAT.... You have created the machine I have been thinking about 7 years now....I have learned from your masterpiece some new practical ideas... I was thinking of adding the the gear box ,,, I have a question, How do you calculate the engine temperature when you are using the running water....I just need this information for my application. Thank's NASAT

@cncongnghe6121

7 ай бұрын

Heat sensor and input water flow extractor. In my opinion, that is enough

I'm so so impressed with this boat build excellent Job, well done. Cheers.

@Nasatchannel

4 ай бұрын

Thank you so much! ❤️

São belas embarcações! Parabéns!!!

Very beautiful with all the necessary mechanical details, but after going to such trouble you didn't make it half a meter longer to get a second seat, it would have made the boat even more beautiful!

That was really impressive. Nice work.

@Nasatchannel

7 ай бұрын

Thank you so much!

Amazing work! Your boat seemed to glide effortlessly on the water. You are a master of your craft!

cara não sei vc ira visualizar esse comentário, mais seu trabalho ficou top! parabéns!

Em giỏi thật, chúc em có nhiều sản phẩm tuyệt vời hơn nữa

@Nasatchannel

6 ай бұрын

Cảm ơn anh rất nhiều nha!

very good.best wish sucessfully

@Nasatchannel

Ай бұрын

Thank you so much! ❤️

Seeing your masterpiece really wows me. Greetings from Thailand

I watch all of your videos and everytime is awesome!.. as malaysia welder, i give you full respect

Tôi luôn thấy bạn sáng tạo, tôi rất thích thú với tư duy sáng tạo của bạn. Chúc các bạn luôn thành công và sức khỏe. Hãy tiếp tục sáng tạo.

@Nasatchannel

2 ай бұрын

Cảm ơn bạn rất nhiều! ❤️❤️