Finally Someone took my build to the next level. Great job on the outcome! Next person will have to focus on the budget numbers to make this homebrew a DIY hack all should build! Great Job Zach

@MartinBogomolni

Жыл бұрын

No kidding... it's an amazing build, right?

@guilhermefranca3099

Жыл бұрын

English not my native language but, if we build conversion kits to sell around world, will be a great business.

@CodysGarage

Жыл бұрын

I watched all your videos before doing mine! :) Standup E-ski: kzread.info/dash/bejne/fqhk0cWjd7LRk7Q.html

@ZachsGarage1

Жыл бұрын

Max Speed: ~35 mph Max RPM: ~6,000 rpm Runtime: ~30 minutes Weight added: +50 lbs Battery Voltage: 128 volts Hopefully people will see these stats, I should have put in the end of the video!

@ZachsGarage1

Жыл бұрын

@CBDC CHRIS 🤣

So I have built a number of electric vehicles. That much power (66kw) by my calculation should have been a lot more impressive then what you are experiencing. I hate to say it, man, especially since it's a year after you post this video, but I think your controller isn't programmed properly. The heat building up is also a sign of improper programming. I know it takes a lot of power to push through water at high speed but the torque off the line should be pretty insane with 66kw of electric power. I don't know if you have moved on from the project but you might want to have another look at your programing. You could be sitting on a real monster and not even know it.

@D2O2

17 сағат бұрын

Jet pump efficiency is the problem, 35-40%

Pretty sweet build! You should try a more aggressive impeller pitch since the electric motor isn't intended to run at the 6800 rpm max of the gas engine.

@zxggwrt

Жыл бұрын

This is it. More pitch

@eh6971

Жыл бұрын

I know a guy who owns a company that makes impellers for jetski's to provide more height in flyboarding. Maybe that's an idea.

@sfort42

Жыл бұрын

For the purposes of this build, which is quick and dirty, the continuous max of the motor is 5,000 rpm and max rpm is 10,000 rpm. And the motor is designed for 120-164 volts. IMO he really needs at least 144 or 156 volts and crank up the rpm to around 7,000 rpm to match the original ICE and the top speed of the ski to around a more pleasing 45 mph, and at optimal conditions, maybe around 50 mph. He’s not gonna be at WOT for long enough to be an issue to blow the motor. But he should run this at WOT for only short amounts of time given that caveat. This is really more of a proof of concept. But yeah, ideally you’d want to tune the impeller to lower the rpm so it doesn’t exceed the continuous rpm of the motor.

@mrsixtyfuckingnine

Жыл бұрын

@@sfort42 as someone who owns two jet skis, I have to disagree that he'll definitely want to be running them at wot for long periods of time. When I'm on mine, the throttle is really just a light switch if I'm not in a no wake zone

@sfort42

Жыл бұрын

@@mrsixtyfuckingnine It's a prototype, as he said himself. He can leave it like it is, which still exceeds continuous motor rpm by 1000 rpm and get subpar performance. I'm just suggesting as a prototype, he should be trying to get 45 mph out of it, which means he exceeds the continuous motor rpm even more. I totally agree with you that it would be ideal to change impeller pitch, but for a prototype that has already costed way in excess of thousands of dollars over his budget, nah. It's irrelevant that you currently own a jet ski. My parents owned one and I've rented them numerous times. I know WOT is more fun, no one is disputing that.

FANTASTIC video! I love all the details you included such as where you purchased parts from, why you chose them, and how much they cost, as well as the details for how you did the build. So many videos skip so much important stuff. I learned a ton from watching your video and loved how you DIY not only your own battery pack but your own spot welder! I hope you make more content like this!

Wow what an amazing job! Can’t believe you worked it all out. Very fun to watch and see come to life. Well done brotha

Great work! Had a fun time watching this. I was having bad thoughts when I imagined Lithium mixing with water, haha.

Zach, the seadoo itself has a max load capacity as well. If you weigh less than the max load capacity then you can add the remaining capacity after subtracting your weight to the weight allowed for batteries.

Fantastic build man, it was great to follow along step by step. I really like that your not afraid to be honest about when things didn't work out... some creators are too proud but i think its cool to see the stumbles along the way to the final build.

@noeaguinaga4018

5 ай бұрын

Yeah most youtubers try and mislead those that aren't too mechanically inclined. Like it all came together with no hiccups. Especially the young youtubers. The ones that you know damn well were learning about the same speed as the viewer. . They also talk the whole time like you can't see wtf they are using and doing. If your good at using objects in view for size reference then you can mostly judge how large an object is. A little off topic on the last part. Sorry

Some job Zach. I’ve never ever though about how much goes into the creation of batteries and pairing a motor. It’s insane

WOW! ... just WOW! You crammed a TON of great stuff into this video. Excellent job with the mechanical and electrical bits! Oh, and very cool how nicely the battery boxes fit inside! I'm subscribing!

THis is the DIY I want to watch. Not someone using 3D Printer and machines worth Thousands of Dollars. All done in the Garage, nice!!

Being an electrician and 16 years experience in lithium batteries for model aeroplanes and helis together with their needs, I admire your work. You are a very clever fellow. The technical detail (put very well in plain English) is really well done. 10 points for your entertainment value too. I wish I could do a video like that. You have your BMS. Just to let everyone else to know it is critical for charging. Cheers.

Well done mate. Great that you have gone into all the details. Inspires me to kick off a project of my own. Keep up the good work

Zach, you are a genuine hero. It was great fun to watch your fascinating journey of PWC conversion.

@MrKdr500

9 ай бұрын

Hero? WTF are you smoking?

Pretty darned cool project there mister! Thanks for sticking with it, and sharing it.

So super jealous that's the coolest dump trailer I've ever seen I absolutely love it

Love this! And your roll your own spot welder is pure genius! One issue that I didn't see any mention of in your video is about thermal management of the batteries. Lithium-ion batteries are subject to thermal runaway which can cause the entire battery pack to catch fire. There are three basic ways that a battery could suffer a thermal runaway, but in your case the most likely cause is that the battery internal temperature gets too high. This is due to high internal heat generation from running at the maximum continuous amps combined with the fact that your sealed plastic battery boxes and foam pieces are actually thermally *_insulating_* and so make it difficult for heat generated by the batteries to escape. My suggestion is that at a minimum, you figure out a way to put a temperature sensor inside each of the battery boxes and connect them to something that will sound an alarm if the temperature inside any box reaches a maximum safe temperature. The sensor should be buried in the middle of the battery pack since this is where the temperature is likely to be the highest. You can also make some modifications to better manage the heat. A simple way is to simply blow air over them to add some forced convection. Another improvement would be to drill a hole in the lid of each battery box and a second hole in the side near the bottom. This would pull air in the hole in the bottom and as that air is heated by the batteries, it rises and exits out the hole in the lid. To keep water out, you could put a riser tube from PVC pipe in the bottom hole and going up to at least the top of the box. Doing both of these would be even better. The ultimate would be to blow air into a box on the underside of the battery area lid and then run small air hoses from the air box to the bottom holes in each battery box to add forces convection directly inside the battery boxes. And for the ultimate thermal management system, you could use the fact that you are operating in a huge body of water, and add a water cooling system that takes lake water and pumps it through copper tubing inside the battery boxes. Only tubing inside the boxes would need to be copper. The rest of the water lines could be PEX tubing. Likely this would be major overkill, but it would definitely be a technical tour de force. Again great video! BTW, I am in the process of designing away to take an old commercial walk-behind mower being sold for cheap because the gas engine is shot and convert it to battery-electric. This would involve 5 electric motors, one for each of the three blades and one for each of the rear wheels. The blade motors will have a controller that varies current to keep the rpms of the blades constant. By having a motor for each rear wheel with its own throttle, I can turn the mower by differential throttling of the motors. I could just use one large motor to directly replace the gas engine, but then I would have to retain the pulley and belt system from the original gas engine configuration that just adds to maintenance. My biggest effort is designing the battery pack to have enough energy to mow my large yard while also being able to provide enough power to drive the motors. Right now my leading candidate for the battery is a lithium-iron-phosphate (LiFePO4). These have the advantage of having very high maximum specific power at the cost of a reduction in specific energy. Their greatest benefit is that the are faaaaar less susceptible to thermal runaway. And the electrolyte they use isn't flammable, so even if they do have a thermal runaway, the result should be just a venting of vapor without catching fire. Your video has been enormously helpful in my efforts to design my battery pack. Thanks!

@mattparke4322

Жыл бұрын

You don't know what your saying. Lifepo batteries and heat have parameters but seriously you obviously are an arm chair captain. Go make your own projects.

@lee-tx5mw

2 ай бұрын

bms can monitor temp etc

I see now why it took so long to get this video out. you did a ton of research! well done Zach! I'm impressed!

If you have an electric setup thats super reliable and ride it alot in the summer, it saves alot of money on gas especially for a 2-stroke. 5 rides in with $4.25 a gallon is roughly $25 or more per boating day which is probably $1000 per summer which is insane. 1 Hour of runtime is acceptable because 2-stroke skis only get about 1 hour or so, 2 hours if conservative on fuel.

I love all things motorized but a two stroke is just so well suited for this application. Regardless it’s a cool project. Hopefully we will have better battery tech in a decade or two but for now it seems we’ve pretty much plateaued.

e propulsion conversion for boats will be a huge industry within the next decade. thanks for your early leadership and vision for this! ~tgb

As a marine engineer I've been working the last three years full time on converting and building new watercraft. Your design choices are really interesting. Your attitude is what made it work in the end. However a small disclaimer would have been in place I believe. It will start to get interesting if a lot of jetskis are converted like this. You have earned my subscription, looking forward to your future projects!

@r.a.monigold9789

Жыл бұрын

I was in the Army - my cousin was a Marine. He also drove a train - a Marine Engineer. Full time working on an "invention" for THREE YEARS - and you got SWAMPED by a young man in his garage - Bright guy...

@willhall7777

Жыл бұрын

Love this comment.

@cerealspilla

Жыл бұрын

@@r.a.monigold9789 Stand down soldier.

@MiddlePark

Жыл бұрын

"As a Marine engineer" This is more electric propaganda. This battery powered boat is extremely underpowered, has basically no range, and is over amped for the amount of battery's installed.

@cerealspilla

Жыл бұрын

@@MiddlePark so it seems this is Grinch's alias outside of Christmas season.

The process is the reward! might not be the "newest, fastest,etc..." But rather, the knowledge, skills, fails, successes, and memories obtained during the entire project is the true reward! Its priceless and youll own them forever.

Congratulations...I am convinced that this is a thorough project wrap-up. I'm appreciative that someone proved to me I can't afford the time, money, added weight and lost performance for my jon project.👌👍

I'm glad you did this project so that I don't have to 😂😂😂😂 I've been considering something like this for one of my projects / videos, but I think I will stick to gas engines in my projects for now. Thanks for the great video !

The issue you're having with the coupling, is that you're out of spec for alignment of the spider type coupling. You might try a polyurethane tire coupling. They allow for a high degree of misalignment.

I'm not certain if you are an engineer, but if you aren't (you missed a good opportunity professionally), you did a pretty good job on this project.

Outstanding! Sometimes the road traveled is more fun than the destination. Good job and looking forward to your next adventure.

Long time no video! Glad to see you back man!!! Hope all is going well with you!!

THIS is the answer! Way to go Zach. Never stop creating and inventing... Thank you for sharing!

My first jet ski was a 1995 Sea-Doo XP I loved that jet ski I love the old jet skis there are more fun then the newer bigger ones

WOW! Amazing job there. You definitely took it to the next level buddy. And did a terrific job building this replacement. Really enjoyed your video mate, and thank you for sharing. Be safe out on the water and god bless 👍 👍👍👍👍👍THUMBS UP👍👍👍👍👍

I have two jet RIBs and one Suzuki 15 Hp project for potential conversion to electric. Thank you for this video and detailed explanation of the process! 😊

@sharonbraselton4302

Жыл бұрын

byy 14 hp ektr7c

@rberglind

Жыл бұрын

@@sharonbraselton4302 ??

@sharonbraselton4302

8 ай бұрын

buy ektr8c rib jeys

Easily the best ev conversion video I have watched. Everything was explained super well and was easy to understand. This was an awesome project that you went all of the way on! You earned a sub! Keep up the good work!!!

@ZachsGarage1

Жыл бұрын

Thanks man!

Grate Prodgect!!! Very important thing you explained people that electric power now still more expensive then combustion engines .

Also, another logical detail, that everyone know, but to mention for future builders: fix all bateries and elements, and make covers water tight / sealed, as much as possible, in case you turn over in water (thats not unusual). Water could destroy almost everything inside (particularly salt water). In any case, ruff ride over waves, can throw things inside left/right, so fix them as much as possible. Excellent project - Bravo! Regards from Serbia

I bought that ski brand new in 95 and have been around pwc for over 30 years. NEVER did anyone think back then we'd ever see it run on an electric motor. Extremely impressed. I'm sure the engineers at BRP Sea-Doo would be entertained with your project. They're already working on an all electric model. Great job!

@christophermueller3370

Жыл бұрын

Already in the works called the E- GTI.. it’s coming by seadoo

@sharonbraselton4302

Жыл бұрын

buy it innsake kniw

Fantastic video and build! Run time could be expanded by expanding battery obviously. What I like about this is the cost savings to have some fun. A set of solar panels can keep your operating costs to a minimum. You also have an emergency power supply in the event of an outage at your home.

To take advantage of the higher torque out of your motor, you could swap the impeller from I believe was the 717 engine that ski came with with the 787cc impeller, it has tighter pitch, you’d also need the 787 impeller shaft kit for the jet pump. Easily doable.

Considering the cost of jet skis and the fact that no one wants to work on them when they break down, this is an awesome idea.

This is a cool video. Being a big personal watercraft fan and having a lot of experience with 1990s Sea-Doos, I will say that your ski is a 1995 Sea-Doo XP that had a 720 cc Rotax. That engine, when new, was capable of 85 hp. It would also spin close to 7800 RPMs. That would give it a top speed, in perfect conditions, trimmed up and leaning back, of about 54 mph. You definitely have the power of the electric motor it just seems you need the RPMs. And that coupler is getting trashed. Pay close attention to alignment. Very cool video.

As soon as you said “18650”, I thought, “How will he ever locate a bad cell?” Glad I kept watching! Excellent work, young man!! 👍🏼 Edit: find an old tire and grind out a replacement for that spider gear 👍🏼

@johanv4668

5 ай бұрын

when you see fire you know where the hotspot or bad cell is. thats why tesla uses a fuse wire on every cell. to be safe. but all in all, he did great. very nice project.

@FilosophicalPharmer

5 ай бұрын

@@johanv4668 Storage yards have to charge for extra space around a wrecked Tesla because they have been known to spontaneously ignite days after being parked. 🫤 Edit: added “wrecked” 👍🏼

Great EV Build, I really appreciate all the technical details and the lessons learnt on undervoltage.

That was a really awesome build video much gratitude for all the hard Labour & research

Awesome job! But for the price you could've put like 6 seadoo motors in that thing but watching this and doing that DIY build and learning stuff is well worth it!!! You got something unique now.

@ZachsGarage1

Жыл бұрын

Knowledge is priceless! 😉

@WindFireAllThatKindOfThing

Жыл бұрын

@@ZachsGarage1 So is the instant torque.

@Zt3v3

Жыл бұрын

@@WindFireAllThatKindOfThing Yeah, but in a jet ski the instant torque doesn't translate like it does with car or bike. The jet pump inherently lags, especially if you want any top speed. It's still an awesome project though and probably something we'll see in the future from powersports manufacturers.

@jt_fpv5555

Жыл бұрын

Could you have used lipo batteries like the ones we use for the quad copters or is that to dangerous 😂 because a 6s battery fits in my palm and produces 25.2 volts? 5 in series 30s? (I’m not an electrician)

@Zt3v3

Жыл бұрын

​@@jt_fpv5555 It's a fair question, I think he'd need 40 6s 5000mah packs to get the same voltage and capacity as his 1st battery, (4x 6s in series with 10x in parallel) remember he had to add a few more too, so 50-60 packs to be usable. I think the 18650's are a less expensive option, but I could be wrong.

Awesome project! There may be some batteries from salvage EV's that you could have bought to save you some time. On second thought you probably took that into consideration and found that either the weight or the cost would not make sense. I found this episode a lot more interesting than some science TV shows. Great job!

@Hansen710

Жыл бұрын

a tesla batterie is made out of 18650 battires that are connected together... people buy the 18650 from the factorys.. they are sold cheaper if they does not meet the standars.. you can probetly buy a pallet of batteries you sort in to a couple of standards, for the same price that he paid for his batteries.. it is probetly more from hybrid cars the batteries can be used, because of the size and weight. but those have value for other hybrid car owners

@petedude2lu3

Жыл бұрын

thunderstruck sells used ev batteries. i got some ought of some smith trucks, rated 84v

@actual_nonsense

8 ай бұрын

Exactly. To combat the moisture problems that come with interacting with a body of water, just put four wheels under it and use it on dry land. Add a cooling system. For rider comfort, just enclose the passenger compartment with door access and put an cargo area on the back. Increase the engine HP to go faster or haul more stuff. To save a bunch of time just buy a made in America Ford F150 since trying to do new things is for losers who read books.@@BOSS_DOG

Amazing job! but you completely missed one of the most important aspects of a watercraft RPM. the first thing you should've been conscientious of was how many rpms your old gas motor was turning. Since your old gas motor is spinning at higher RPM's than the electric motor, you need to adjust the pitch on your prop on your jet pump. And since you have a electric motor, which has wayyyy more torque than a 2 stroke gas motor. It will make up for the amount of RPM's you lost, if you have a higher pitch prop on your jet pump. You can make that ski go way faster than what it's going.

You cracked me up when testing the spot welder when the other person mentions the sparks from it and you say "Silence" lol i was in stitches laughing my head off... Great work too 👍

Very cool video! This brought back my creative side that I was born with, though @ 70 long in misuse. I had 3 different jet-ski rental business's in Florida, I jet-skied to work. Jet-skis were my life. Watching all this and your fantastic explanation of each step kept me mesmerized. Great job! I will leave with "The One" question not answered. All jet-skis and water-craft will Always have to deal with Water intrusion, it's un-avoidable. So I see that motor controller being fried after a few good hard waves with water intrusion. Maybe someday all these electronics can be sealed and still get the necessary cooling. Just my input is all, but absolutely love the creativity combined with searchable knowledge! Kudos!

@ZachsGarage1

Жыл бұрын

I appreciate your comment! Sealing all the batteries from the water and ironically water cooling them is a must for sure! This was a fun prototype though!

Zach you nailed it man. This is why EV's are not going anywhere fast. The capacity and power cannot be compared to fuels.

Great project. Well done. Few more years of battery advancement and these kinds of conversions will be a no brainer.

That was a pretty awesome project! 🤩 A few tips if you ever need to build a big lithium pack again: While 18650 cells were the go to size for a long time these days you might want to look for 21700 cells, they are a bit bigger and tend to be a bit cheaper for the same total capacity (also more capacity per cell means a little less welding) for the spot welder you can get ready made modules that use a bunch of MOSFETS instead of a relay for switching the welding current giving you more consistent results...

1000A around water = genius!

As a electrical technician I have been working on 3 phase induction motor, variable frequency drive, dc-ac inverter, battery charger for years. My plan is to buy a broken outboard, keep the propeller, replace the engine with a 3 phase motor which attach to the shaft.

This is actually amazing content to follow, Love this type of videos

For all those people who don't fully understand just how powerful and useful those "dirty" gasoline engines really are! Excellent build sequence and I'm sure whichever engineering school you go to will be happy to have you. ;)

@devswell6538

Жыл бұрын

It just proves how inefficient jet-skis are by design. That much power spinning a prop would have you going 50knots. Jetski engines are actually pretty massive.

@timrussell1559

Жыл бұрын

And currently there is no viable alternative to all of those dirty and inefficient gasoline engines. And there won't be anything available anytime soon either

@jasonbroom7147

Жыл бұрын

@@timrussell1559 - I tend to agree, except that things are evolving very quickly in this space right now, as a result of all the money going into EV development. NASA claims to have a safe battery chemistry with gravimetric energy density high enough for commercial aircraft...that oughta move a PWC just fine.

@jasonbroom7147

Жыл бұрын

@Nathan Smith - That is a fact, and one reason why I think it is inevitable that both options will exist for many years to come.

@devswell6538

Жыл бұрын

@Nathan Smith would you consider biodiesel or ethanol to be a petro chemicals?

Just be careful running the jet pump at that high of an rpm, for that long, out of water. Awesome Project Build! Came out Great! Also i know it sounds like a bad idea bc of wires and metal.. But using metal battery boxes or some fire proof plastic, would work good and double as being a fire protection battery box, if a lipo battery cell assembly was to puff up or catch fire. I've seen some 4s & 6s rc lipo batteries go bad, usually nothing but sometimes smoke.. but fire isn't common but if you google for pictures you will see examples of it happening.. its a lot of power an a lot of Amps being pulled from the batteries and wiring.

Love seeing these conversion videos, sure cost wise is not even close to getting a new ICE engine, but it does show what can be done and what a Manufacturer could offer. Great work :)

If there is one thing that I must respect, is your persistency and drive!

That was AWESOME! I was thinking about converting an old sailboat to electric when the diesel goes out. I think in 3-4 years when it does, prices will have dropped dramatically. Definitely saving this video for the future. Great Job!

@ddexter8723

Жыл бұрын

You probably have 3 to 4 weeks at best

@joebeech7423

Жыл бұрын

Check out Sampson Boat Company. Leo powers his rebuild with a hybrid system. Worth a look👍

@sharonbraselton4302

8 ай бұрын

bhy bew elrric sail boat eterr speed rabfe

24 volt inverter and 220 volt low amp reduce heat. There's a guy who did it. Great job thanks 4 sharing

Man I love to tinker and this is right up my alley, there are some jet skis that don’t have motors on marketplace by me so I’m thinking of trying something like this. Thanks for the video!!!!

Good job! It could be even a little better, using a water cooled motor and motor controller as you will have all the cooling media needed available.

Congratulations, I am an engineer and I admire your way of thinking and daring to go so far!!!

Good on you for following through with the project

Thank you for spending your time, money + positive energy,by not being negative (see what I did??? 🤣) I have been thinking of doing this to several different modes of transportation! After watching your investment of everything I decided to go back to the good ole suck,squeeze,bang,blow motor with a transmission....both is a boat & a snowmobile

Dude, what a fantastic build! I liked the software you used to make a motor mount. Do you think I could use it to modify a ring gear for an RC car? I have a build I'm doing and I want to use some bigger output shafts since the stocks ones weren't a versatile as the ones I planned to use.

Back in 2000 I built a Yamaha Wave runner 3 person into a Ultra lite. The first thing was the weight of this hull, 240 lbs. with Nothing in the hull. This was not going to work. So the hull mould was made. Carbon/Kevlar & honeycomb vacuum bag we go. 65lbs later we began the build. She had a very hard time getting up to plain, over 30 seconds of full power( rotax 582 aircraft engine) and she picked up speed. So I knew the hull was needing some help. I used thin fiberglass under the hull extending outboard another 5" and curved upward in the bow, like a water ski. Back testing this out, 5 seconds of power she was on top running great. Top speed take off, 26mph and were up. 6,000 feet in minutes. So what I'm saying here is, make the hull change as above. Good luck.

Thanks to KZread algorithms for recommending this video! Searched for three years, there were no good examples! I have the same jet ski, even colors and years, but not XP but GTI! I have long dreamed of transferring it to electric, I have even bought a motor! In the video, everything is done very competently, everything is super, except for the battery! the battery in the electrical theme is 90% success! Lithium iron phosphate prismatics in blue cases are highly recommended! they give more current, do not heat up, and are not very afraid of the cold, and they need less quantity! It is important to seal all wire connections against water! I really liked that the author taught the culture of weight! according to my calculations, about 80 kg is allocated, this is about 15 kWh of energy Thanks for the video, good luck! Subscribed!

I think you'll have better performance with a suitable coupler. Maybe you could find a different impeller if the RPM isn't matched right.

Wow! That's not a vehicle that I thought anyone would be interested in EV swapping, but man, your build is impressive! How long could you ride before the battery pack was flat?

@ZachsGarage1

Жыл бұрын

you could go about 30 minutes, but probably would run into overheating before draining the batteries all the way! I'd use larger wires. The battery cells themselves actually didn't generate too much heat ( some other chemistries for more capacity but less discharge amps like 7amp max, would generate heat faster at the same amp draw. I did some testing with other cells first, but ran out of time to show that in the video ) :P

He's very smart, no gas no changing of oil, he should be working wit one of those top companies or start his own business..

A crazy amount of work went into this😮 Good job bro

Amazing build.. I worry about your Chinese cells built that big.. Terrible experiences building packs with 18650.. I always try and use the minimal number of cells I can get away with any project. For eg. headways where you can get 200amps per cell and each cell is 8ah. Much more stout connections too.. I figure with vibration and all the hammering in a seadoo.. you're connections in those batteries will fail in short order and upon a few charges you will ruin adjacent cells.. Also no BMS will be a true nightmare to charge those batteries..

@ryurc3033

Жыл бұрын

I attempted 18650 in rc cars, they don't like a strong draw. When I geared it up for more top speed it almost burned my rc car to the ground. But I always use Velcro straps on all my lipo batteries so I can get them out in a hurry when I need to

@procrastinator1842

Жыл бұрын

Agree. Also with those cheaper cells I have had about a 15% early failure rate. And 500 cycles on these....maybe at 0.2C discharge, but at 20A....no way.

Great video and cool DIY. I worked for a company that converted a jet ski with an HPEVS AC induction motor about 15 years ago or more. A few things I would recommend are a torque converter, a proper bms - yours doesn’t seem to do anything other than monitor cell voltage, a stronger motor mounting system, and an actual lithium battery charger (not two DC-DC converters). Lithium batteries have a different charging curve than lead acid which is super important to recognize.

Amazing that you did this in your home garage! Love to see it!

I'm very proud of you. Great job. Somebody's old man. Be safe. B. Dremin.

Kinda a cool experiment but this just goes to show the ease and simplicity and longevity of using gas over electricity for powered vehicles there is just no replacement for the gas engine

@sharonbraselton4302

8 ай бұрын

wtibg

Salt water and electronics do not play well together. Maybe for a very short term, but that pesky salt *will* destroy your electronics. Every single time.

@mvmedved

Жыл бұрын

Does he swim in a salt lake?

@davidfinney6855

7 ай бұрын

Greenline yachts seem to have it under control

@Greg-io1ip

7 ай бұрын

Golf courses on salt water coastlines around the world. Golf world figures it out but others can't?

@ivicamilosavljevic4706

6 ай бұрын

There are a lot of electric jet surf boards last dacade at the Sea...still working

@davidfinney6855

6 ай бұрын

@@ivicamilosavljevic4706 solar on sailboats is a standard for years. T

Thanks for the guide!

Awesome build. Can’t wait to see what you put that motor into next.

Gas all day

@fidlekid

5 ай бұрын

Horses are more efficient

@cwykidd

22 күн бұрын

For now. Internal combustion is just way too dirty. They are on there way out. Electric is like instant torque.

Thanks dude for an amazing video!!👍👍😁 Enjoyed all the seconds of it😁👍

AMAZING PROJECT EFFORT, AND YOU MANAGED TO FILM AND EDIT. GENIUS!!!

This felt more like a feel good movie then a yt video

You going places in life. I’m so glad to see you doing what you love. I wish I had the brain power at your age, at 53 I’d be able to just help others and have no other worries of how to retire. Hope all young men and woman in your generation pay attention. If you do read this tell your parents , thank you. They did a great job raising you..

Great video, with a lot of good technical details!! thanks and congratulations.

I thoroughly enjoyed this. I have great ideas but near zero electrical engineering knowledge & experience. I really like the idea of projects that drive innovation with off the shelf tech. Technological alchemy. 🤓🤔😎

Amazing work! Congratulations!

Great job young Skywalker! If I were your father, Darth, I would be mighty proud of my young Jeti!

Great work all around!

Amazing video and a lot to improve on that project. I think you can compromise on capacity if you use higher discharge rated batteries and get the voltage much higher as you already said by connecting more in series. I am currently running almost the same exact project in Greece and you cannot imagine how much you help with that video.

Awesome! Thoroughly enjoyed your project.

Great project!! You're a crafty young man.

Great job, awesome project!!!!! 👏🏻 👏🏻 👏🏻 👏🏻

Cool project; remember water and HV can be problematic. Thanks for enriching the interweb. Inspiration for alll.

Nice storey. Well done and thanks for taking the time to post it. Now all you need to do is add a hydrofoil system - it'll reduce your drag by up to 70%... It would be interesting to see how many cells you could have got in the original fuel tank... But you'd probably need a good 2 x improvement on volumetric energy density of the Li cells to make that work...

The XP was one of the best handling and powerful of the skis of the day. I went to a demo and rode every single ski. The wave raider was the worst, wouldn't turn, no power just trash. Love the XP

@sharonbraselton4302

8 ай бұрын

wríbg😊

Excellent video! One that I really enjoyed watching and can relate to. Subscribed.

This is beyond amazing.