Tried my best sorry if the video/ commentary is bad, hopefully this helps you guys.
@shaneporter7280
8 ай бұрын
mate you did very well, like you said 'you are the only person on youtube addressing this exact issue.... good job
@jwherron
5 ай бұрын
I'm a N55 owner, and I appreciate the video. We have a similar hose that runs the same route. Unfortunately, the N55 has two plastic clips in the center section. Over time, they get brittle and break. When this happens, the hose can rub against the crank pulley. Managed to catch it before it cut through. I'll be changing mine very soon. Thanks again.
@jaredvelazquez564
5 ай бұрын
Yoo bro what did you use to remove the 2 bolts from the bracket that holds up the hose.. currently working on this right now
@onearmy9424 ай бұрын
Thank you for this. The visual of where that hose is attached and mounted under the driverside is extremely helpful.👍
@cesardiaz2467 Жыл бұрын
The only video that I could find about this hose. THANK YOU
@andyroo30229 ай бұрын
I nose my front end slightly onto a concrete garden bed kurb at home centre carpark, cracked the lower plastic part and dumped all my coolant. My new part arrived yesterday. Thanks for your video.
@j0taz1 Жыл бұрын
I did this repair on an automatic 07 328xi and the bracket was a 10mm bolt. This video helped a lot, thanks.
@NoEmotionsPodcast
7 ай бұрын
How did you manage to reach that other bracket?
@Everybodyshinetogether1
6 ай бұрын
The hose befor the water pump part is that a clamp because autozone sells that part but I’m not sure if I’m gone need for his this whole set up all I need is that part can u help me out
@firstmkb
4 ай бұрын
@@Everybodyshinetogether1all 6 of those metal bands on my 328i automatic are a single piece of steel, slightly crimped in a factory to hold them tight. If you try to use a regular screw radiator hose clamp to replace those bands you will likely crush the plastic connector - which would put you back to buying the BMW part (not any worse off).
@sacebaby10 ай бұрын
Man I did mines with out this video about a year ago and I was looking for this video but same thing happened to me and I thought about making a diy thanks u for saving the world
@OtissSpunkmeyer
5 ай бұрын
Same. Have done this twice now. lol
@firstmkb4 ай бұрын
Thanks for posting! The ONE thing I came for is to find out how to get that damned third bolt off. I’ll try one of those little ratchets with a 10mm on my automatic, and if that doesn’t work I’ll start taking suspension off until I can reach it! Do you ever want to smack around the engineers that designed a specific part? 😅
@thps8931 Жыл бұрын
Informative, thank you for making this video!
@AutomotiveTherapy Жыл бұрын
Appreciate it man!!
@slitherdurant Жыл бұрын
Thanks a lot good video
@sufyansohail1237 Жыл бұрын
Thanks alot man!!
@iskandermamedov92546 ай бұрын
Thank you bro!
@user-wm3fc1sk1p3 ай бұрын
6:17 We've all been there🤣🤣
@geofer8633 Жыл бұрын
I was waiting for this video Thanks
@user-ci3sp3mx9e3 ай бұрын
Can you not take the hose apart, specifically the part that connect to the expansion tank
@Osamabeenleanin210 Жыл бұрын
This is probably the only video I can find on this and it's still not exactly what I was looking for. I've been trying to find a video showing the 07 n54 hose because there's a small horse shoe shaped hose we have and that's the part I'm leaking from. A shop wanted $1038 for labor and $330 for the hose, claimed it would be a 6 hr job🤡 You a 6 hr lie. Ima give you over 1,000 dollars to replace a $30 piece of rub and plastic🤣🤣 hopefully mine gets here Sat😮💨
@KingjaqueSnipez
Жыл бұрын
Did you figure it out?
@firstmkb
4 ай бұрын
The dealer wanted about $2,000 to fix the oil leak on my 328i xDrive, which I thought was crazy until I saw how much of the subframe you have to remove to get the oil pan off. Planning to DIY at some point, using shortcuts from other KZread channels.
@spade65525 ай бұрын
You a real one🫡
@nebuchadnezzarii64236 ай бұрын
this job sucked on thec335i. yhe reservoir side had no room
@ryankjamess6 күн бұрын
What’s the part number
@manincastle Жыл бұрын
Any idea what the part's name is? Can I find it at any auto parts store?
@sweetvrevenge740
Жыл бұрын
It’s called a coolant recovery tank hose on the FCP Euro website, but as far as auto parts stores I think they would have to special order it I don’t think they would have it in stock
@izaiahallen54575 ай бұрын
Will this be the same as the 2011 328i xdrive n52 engine?
@OtissSpunkmeyer
5 ай бұрын
Pretty much except your gonna have an extra hose that connects to your transmission cooler. In the e middle. It’s gonna be a 3 way connection almost dead center.
@firstmkb
4 ай бұрын
I have the same car! I was in a hurry and found an unforgiving curb.
@jaykarlsson2296Ай бұрын
I cannot get the damn higher hose connected for the life of me!! Thought I had it but it popped out a week later and drained my whole system!! Plzz help!!
@leemac9070 Жыл бұрын
Line heater return to thermostat
@user-ou3pv7ti2b8 ай бұрын
yo bro wasn’t that house tank was supposed to come with another small hose in the middle of the whole thing? you know what i mean?
@wise_soul8886
7 ай бұрын
*i have that hose in the middle... don't know what its for because it's connected to the same hose*
@OtissSpunkmeyer
5 ай бұрын
It’s for the trans mission cooler. You’re only gonna find that extra hose on cars with an N52 I believe. Don’t quote me on that. But that’s def what the other hose is for. I’ve done this job twice.
@user-hs5jb8yr2x11 ай бұрын
Did you have to bleed your engine to do that?
@sweetvrevenge740
11 ай бұрын
What’s sup! After installing the part and refilling your coolant reservoir, you do need to bleed it to get all the air bubbles out which is super easy to do if you look up the video But, if you meant that, if you need to drain the coolant to replace this part then no you don’t have to, but it would make it less messy if you did lol
@adiletmurzaliev3386 Жыл бұрын
Hi BMW e93 328i automatic transmission, leaking on connection between coolant reservoir and this lower hose, which one should I replace?!
@sweetvrevenge740
Жыл бұрын
I would definitely do the coolant reservoir first it’s easier and also the o ring on the lower hose, before doing the entire lower hose hopefully that fixes it
@adiletmurzaliev3386
Жыл бұрын
@@sweetvrevenge740 thanks for answer. Do you know what is the size of that o ring?
@Antonio-pq4fb
Жыл бұрын
@@sweetvrevenge740 what size is the o ring please? Mine is leaking between expansion tank and hose
@sweetvrevenge740
Жыл бұрын
@@Antonio-pq4fb I’m not sure bro I tried looking it up but couldn’t find an answer, I would try just buying a o ring kit and seeing which fits or maybe just getting one in person at the bmw dealership parts department
@Antonio-pq4fb
Жыл бұрын
I found it!! 28mm OD 20mm ID 4mm CS Mine is fixed now
Пікірлер: 49
Tried my best sorry if the video/ commentary is bad, hopefully this helps you guys.
@shaneporter7280
8 ай бұрын
mate you did very well, like you said 'you are the only person on youtube addressing this exact issue.... good job
@jwherron
5 ай бұрын
I'm a N55 owner, and I appreciate the video. We have a similar hose that runs the same route. Unfortunately, the N55 has two plastic clips in the center section. Over time, they get brittle and break. When this happens, the hose can rub against the crank pulley. Managed to catch it before it cut through. I'll be changing mine very soon. Thanks again.
@jaredvelazquez564
5 ай бұрын
Yoo bro what did you use to remove the 2 bolts from the bracket that holds up the hose.. currently working on this right now
Thank you for this. The visual of where that hose is attached and mounted under the driverside is extremely helpful.👍
The only video that I could find about this hose. THANK YOU
I nose my front end slightly onto a concrete garden bed kurb at home centre carpark, cracked the lower plastic part and dumped all my coolant. My new part arrived yesterday. Thanks for your video.
I did this repair on an automatic 07 328xi and the bracket was a 10mm bolt. This video helped a lot, thanks.
@NoEmotionsPodcast
7 ай бұрын
How did you manage to reach that other bracket?
@Everybodyshinetogether1
6 ай бұрын
The hose befor the water pump part is that a clamp because autozone sells that part but I’m not sure if I’m gone need for his this whole set up all I need is that part can u help me out
@firstmkb
4 ай бұрын
@@Everybodyshinetogether1all 6 of those metal bands on my 328i automatic are a single piece of steel, slightly crimped in a factory to hold them tight. If you try to use a regular screw radiator hose clamp to replace those bands you will likely crush the plastic connector - which would put you back to buying the BMW part (not any worse off).
Man I did mines with out this video about a year ago and I was looking for this video but same thing happened to me and I thought about making a diy thanks u for saving the world
@OtissSpunkmeyer
5 ай бұрын
Same. Have done this twice now. lol
Thanks for posting! The ONE thing I came for is to find out how to get that damned third bolt off. I’ll try one of those little ratchets with a 10mm on my automatic, and if that doesn’t work I’ll start taking suspension off until I can reach it! Do you ever want to smack around the engineers that designed a specific part? 😅
Informative, thank you for making this video!
Appreciate it man!!
Thanks a lot good video
Thanks alot man!!
Thank you bro!
6:17 We've all been there🤣🤣
I was waiting for this video Thanks
Can you not take the hose apart, specifically the part that connect to the expansion tank
This is probably the only video I can find on this and it's still not exactly what I was looking for. I've been trying to find a video showing the 07 n54 hose because there's a small horse shoe shaped hose we have and that's the part I'm leaking from. A shop wanted $1038 for labor and $330 for the hose, claimed it would be a 6 hr job🤡 You a 6 hr lie. Ima give you over 1,000 dollars to replace a $30 piece of rub and plastic🤣🤣 hopefully mine gets here Sat😮💨
@KingjaqueSnipez
Жыл бұрын
Did you figure it out?
@firstmkb
4 ай бұрын
The dealer wanted about $2,000 to fix the oil leak on my 328i xDrive, which I thought was crazy until I saw how much of the subframe you have to remove to get the oil pan off. Planning to DIY at some point, using shortcuts from other KZread channels.
You a real one🫡
this job sucked on thec335i. yhe reservoir side had no room
What’s the part number
Any idea what the part's name is? Can I find it at any auto parts store?
@sweetvrevenge740
Жыл бұрын
It’s called a coolant recovery tank hose on the FCP Euro website, but as far as auto parts stores I think they would have to special order it I don’t think they would have it in stock
Will this be the same as the 2011 328i xdrive n52 engine?
@OtissSpunkmeyer
5 ай бұрын
Pretty much except your gonna have an extra hose that connects to your transmission cooler. In the e middle. It’s gonna be a 3 way connection almost dead center.
@firstmkb
4 ай бұрын
I have the same car! I was in a hurry and found an unforgiving curb.
I cannot get the damn higher hose connected for the life of me!! Thought I had it but it popped out a week later and drained my whole system!! Plzz help!!
Line heater return to thermostat
yo bro wasn’t that house tank was supposed to come with another small hose in the middle of the whole thing? you know what i mean?
@wise_soul8886
7 ай бұрын
*i have that hose in the middle... don't know what its for because it's connected to the same hose*
@OtissSpunkmeyer
5 ай бұрын
It’s for the trans mission cooler. You’re only gonna find that extra hose on cars with an N52 I believe. Don’t quote me on that. But that’s def what the other hose is for. I’ve done this job twice.
Did you have to bleed your engine to do that?
@sweetvrevenge740
11 ай бұрын
What’s sup! After installing the part and refilling your coolant reservoir, you do need to bleed it to get all the air bubbles out which is super easy to do if you look up the video But, if you meant that, if you need to drain the coolant to replace this part then no you don’t have to, but it would make it less messy if you did lol
Hi BMW e93 328i automatic transmission, leaking on connection between coolant reservoir and this lower hose, which one should I replace?!
@sweetvrevenge740
Жыл бұрын
I would definitely do the coolant reservoir first it’s easier and also the o ring on the lower hose, before doing the entire lower hose hopefully that fixes it
@adiletmurzaliev3386
Жыл бұрын
@@sweetvrevenge740 thanks for answer. Do you know what is the size of that o ring?
@Antonio-pq4fb
Жыл бұрын
@@sweetvrevenge740 what size is the o ring please? Mine is leaking between expansion tank and hose
@sweetvrevenge740
Жыл бұрын
@@Antonio-pq4fb I’m not sure bro I tried looking it up but couldn’t find an answer, I would try just buying a o ring kit and seeing which fits or maybe just getting one in person at the bmw dealership parts department
@Antonio-pq4fb
Жыл бұрын
I found it!! 28mm OD 20mm ID 4mm CS Mine is fixed now