This is a great video!! I don't care if your flashlight was on. Subscribed!!

awesome video

Thank you for the information

Thanks for the help I'm going to subscribe

When will you show idle adaptive spark tuning?

whooooom, whoooooom, ha ha, thanks for the video

Plan on doing adaptive spark vid?

Man I hope this fixes my idle issues gonna try it mine was doing exactly what you said decelerating zoom and hunting then some times stalls and sometimes he finds it and idles Hope this fixes my high rev on start up after car is warmed I revs to like 2500-3000 rpms then slowing comes down

@imstockyo8615

4 жыл бұрын

If its gen 4 it should do you well

@ktcarroll4723

4 жыл бұрын

imstockyo it’s a 2000 5.3 using a 0411 ecu and wiring harness from a 2002 suburban with flex fuel injector. Howard cam 598/601 headers CAI TURBO 400 bored 30mm stock truck intake. Runs pretty good cruising just stopping at stop signs and in traffic is horrible

@imstockyo8615

4 жыл бұрын

@@ktcarroll4723 give it a try without removing the 20% also make sure you log stit and ltit to see if the car is adding or subtracting airflow

@ktcarroll4723

4 жыл бұрын

imstockyo will do. Really appreciate your help

So if mine is going by temperature do I put the temperatures in the Box

@imstockyo8615

6 жыл бұрын

bossmob25 yes instead if rpm

Should you follow this process once your car is warm? Or on cold starts?

@imstockyo8615

6 жыл бұрын

scotts dale if it is by temp start cold but either way cold starts tend to produce similar results

Great info, but that glare is annoying!! Any plans on making a video on how to tune Ve using stft and ltft

@imstockyo8615

7 жыл бұрын

francisco gallegos yes I could possibly do something like that I think it would be more informing if it did that with a wideband input. stft is nice but it is useless if you are not targeting 14.7 afr.

How do you set it up by rpm instead of by temperature

@imstockyo8615

6 жыл бұрын

Randy Sullivan you have to set it up in the scanner, right click on the graph list and go to layouts and just build it to be the way yours is.

Do you flash the ecu with the table at 0 then data log? Or can I data log it with the stock data? Thanks in advance

@imstockyo8615

6 жыл бұрын

Rosa Arreola I 0 the table and then log but either has worked for me

@imstockyo8615

5 жыл бұрын

Either will work I like to use 0 so there is nothing changing or adding value.

can you upoad another video of getting the rest of the idle tables, like the idle spark advance and etc

@imstockyo8615

5 жыл бұрын

I though about doing another video of a big cam ls3, from scratch to give people some help

@bitcanics6892

5 жыл бұрын

@@imstockyo8615 I need help with idle spark advance tables. Can we graph those? I have a c6 ls2 all done up and everything is good but I want a loopy idle

@bitcanics6892

5 жыл бұрын

@@imstockyo8615 I'm subscribed. How tuners content would be amazing

@imstockyo8615

5 жыл бұрын

Idle timing you just gotta play with I normally end up between 18-22* you want smooth but play with spark in the scanner for better sound

@bitcanics6892

5 жыл бұрын

@@imstockyo8615 when i play with spark in scanner that doesnt edit the idle spark tables just the main spark correct? how can i edit idle spark tables from scannner diag

Do u do email tunes

@imstockyo8615

5 жыл бұрын

I normally do not since we would both have to license the ECU, but I can help you with your tune just send me a text or or email.

@swangin_dirty_rods_tv

5 жыл бұрын

@@imstockyo8615 whats ur email ill send u a log of my car at idle and the tune file and if possible u can walk me through it

@imstockyo8615

5 жыл бұрын

Shoretuned@gmail.com