Man I hope this fixes my idle issues gonna try it mine was doing exactly what you said decelerating zoom and hunting then some times stalls and sometimes he finds it and idles Hope this fixes my high rev on start up after car is warmed I revs to like 2500-3000 rpms then slowing comes down
@imstockyo86154 жыл бұрын
If its gen 4 it should do you well
@ktcarroll47234 жыл бұрын
imstockyo it’s a 2000 5.3 using a 0411 ecu and wiring harness from a 2002 suburban with flex fuel injector. Howard cam 598/601 headers CAI TURBO 400 bored 30mm stock truck intake. Runs pretty good cruising just stopping at stop signs and in traffic is horrible
@imstockyo86154 жыл бұрын
@@ktcarroll4723 give it a try without removing the 20% also make sure you log stit and ltit to see if the car is adding or subtracting airflow
@ktcarroll47234 жыл бұрын
imstockyo will do. Really appreciate your help
@Good-Enuff-Garage4 жыл бұрын
whooooom, whoooooom, ha ha, thanks for the video
@bitcanics68925 жыл бұрын
can you upoad another video of getting the rest of the idle tables, like the idle spark advance and etc
@imstockyo86155 жыл бұрын
I though about doing another video of a big cam ls3, from scratch to give people some help
@bitcanics68925 жыл бұрын
@@imstockyo8615 I need help with idle spark advance tables. Can we graph those? I have a c6 ls2 all done up and everything is good but I want a loopy idle
@bitcanics68925 жыл бұрын
@@imstockyo8615 I'm subscribed. How tuners content would be amazing
@imstockyo86155 жыл бұрын
Idle timing you just gotta play with I normally end up between 18-22* you want smooth but play with spark in the scanner for better sound
@bitcanics68925 жыл бұрын
@@imstockyo8615 when i play with spark in scanner that doesnt edit the idle spark tables just the main spark correct? how can i edit idle spark tables from scannner diag
@MichaelDiPirro5 жыл бұрын
awesome video
@firemedic38665 жыл бұрын
Plan on doing adaptive spark vid?
@johnrodriguez61365 жыл бұрын
What fuel system are you using?
@imstockyo86155 жыл бұрын
Was stock z06 pump at the time, now a custom shoretuned fuel system
@robby_skaz21675 жыл бұрын
i have a 500hp ls3 in my corvette c4 its got a zr1 rear end with the fatty tires and ive been looking into nitrous but im hesitant as i know nothing about and am terrified of blowing my engine
@swangin_dirty_rods_tv5 жыл бұрын
Do u do email tunes
@imstockyo86155 жыл бұрын
I normally do not since we would both have to license the ECU, but I can help you with your tune just send me a text or or email.
@swangin_dirty_rods_tv5 жыл бұрын
@@imstockyo8615 whats ur email ill send u a log of my car at idle and the tune file and if possible u can walk me through it
Do you flash the ecu with the table at 0 then data log? Or can I data log it with the stock data? Thanks in advance
@imstockyo86156 жыл бұрын
Rosa Arreola I 0 the table and then log but either has worked for me
@imstockyo86155 жыл бұрын
Either will work I like to use 0 so there is nothing changing or adding value.
@coarsegrind6 жыл бұрын
When will you show idle adaptive spark tuning?
@coarsegrind6 жыл бұрын
This is a great video!! I don't care if your flashlight was on. Subscribed!!
@bossmob256 жыл бұрын
Thanks for the help I'm going to subscribe
@bossmob256 жыл бұрын
So if mine is going by temperature do I put the temperatures in the Box
@imstockyo86156 жыл бұрын
bossmob25 yes instead if rpm
@nickcheatham62896 жыл бұрын
What nitrous system are you running if you don't mind me asking? I've got a 2013 grand sport that's already making 483 whp just cam and exhaust and I've been looking into going to nitrous.
@mr440boy6 жыл бұрын
Nick Cheatham nick waht ur cam
@flxsuki6 жыл бұрын
I have the same engine i want to turbo! Ik its been 2 years after this video do you still have the turbo on and is it reliable?
@randysullivan57236 жыл бұрын
How do you set it up by rpm instead of by temperature
@imstockyo86156 жыл бұрын
Randy Sullivan you have to set it up in the scanner, right click on the graph list and go to layouts and just build it to be the way yours is.
@scottsdale33236 жыл бұрын
Should you follow this process once your car is warm? Or on cold starts?
@imstockyo86156 жыл бұрын
scotts dale if it is by temp start cold but either way cold starts tend to produce similar results
@thebigtickit127 жыл бұрын
Great info, but that glare is annoying!! Any plans on making a video on how to tune Ve using stft and ltft
@imstockyo86157 жыл бұрын
francisco gallegos yes I could possibly do something like that I think it would be more informing if it did that with a wideband input. stft is nice but it is useless if you are not targeting 14.7 afr.
@TheFi1thyCasual7 жыл бұрын
mind sharing cam specs?
@imstockyo86157 жыл бұрын
my custom spec 236/248
@TheFi1thyCasual7 жыл бұрын
nice, looking at a similar spec cam think you sold me on it.
@imstockyo86157 жыл бұрын
thaddeusabear well I can get you a full cam package if you would like
Пікірлер
Nice cobalts are sick
Thank you for the information
What gas?
Punp 93
Man I hope this fixes my idle issues gonna try it mine was doing exactly what you said decelerating zoom and hunting then some times stalls and sometimes he finds it and idles Hope this fixes my high rev on start up after car is warmed I revs to like 2500-3000 rpms then slowing comes down
If its gen 4 it should do you well
imstockyo it’s a 2000 5.3 using a 0411 ecu and wiring harness from a 2002 suburban with flex fuel injector. Howard cam 598/601 headers CAI TURBO 400 bored 30mm stock truck intake. Runs pretty good cruising just stopping at stop signs and in traffic is horrible
@@ktcarroll4723 give it a try without removing the 20% also make sure you log stit and ltit to see if the car is adding or subtracting airflow
imstockyo will do. Really appreciate your help
whooooom, whoooooom, ha ha, thanks for the video
can you upoad another video of getting the rest of the idle tables, like the idle spark advance and etc
I though about doing another video of a big cam ls3, from scratch to give people some help
@@imstockyo8615 I need help with idle spark advance tables. Can we graph those? I have a c6 ls2 all done up and everything is good but I want a loopy idle
@@imstockyo8615 I'm subscribed. How tuners content would be amazing
Idle timing you just gotta play with I normally end up between 18-22* you want smooth but play with spark in the scanner for better sound
@@imstockyo8615 when i play with spark in scanner that doesnt edit the idle spark tables just the main spark correct? how can i edit idle spark tables from scannner diag
awesome video
Plan on doing adaptive spark vid?
What fuel system are you using?
Was stock z06 pump at the time, now a custom shoretuned fuel system
i have a 500hp ls3 in my corvette c4 its got a zr1 rear end with the fatty tires and ive been looking into nitrous but im hesitant as i know nothing about and am terrified of blowing my engine
Do u do email tunes
I normally do not since we would both have to license the ECU, but I can help you with your tune just send me a text or or email.
@@imstockyo8615 whats ur email ill send u a log of my car at idle and the tune file and if possible u can walk me through it
[email protected]
With 4 people in the car too lol.
Do you flash the ecu with the table at 0 then data log? Or can I data log it with the stock data? Thanks in advance
Rosa Arreola I 0 the table and then log but either has worked for me
Either will work I like to use 0 so there is nothing changing or adding value.
When will you show idle adaptive spark tuning?
This is a great video!! I don't care if your flashlight was on. Subscribed!!
Thanks for the help I'm going to subscribe
So if mine is going by temperature do I put the temperatures in the Box
bossmob25 yes instead if rpm
What nitrous system are you running if you don't mind me asking? I've got a 2013 grand sport that's already making 483 whp just cam and exhaust and I've been looking into going to nitrous.
Nick Cheatham nick waht ur cam
I have the same engine i want to turbo! Ik its been 2 years after this video do you still have the turbo on and is it reliable?
How do you set it up by rpm instead of by temperature
Randy Sullivan you have to set it up in the scanner, right click on the graph list and go to layouts and just build it to be the way yours is.
Should you follow this process once your car is warm? Or on cold starts?
scotts dale if it is by temp start cold but either way cold starts tend to produce similar results
Great info, but that glare is annoying!! Any plans on making a video on how to tune Ve using stft and ltft
francisco gallegos yes I could possibly do something like that I think it would be more informing if it did that with a wideband input. stft is nice but it is useless if you are not targeting 14.7 afr.
mind sharing cam specs?
my custom spec 236/248
nice, looking at a similar spec cam think you sold me on it.
thaddeusabear well I can get you a full cam package if you would like
imstockyo shoot me the details
thaddeusabear send me a email at [email protected]
Nice my brutha'! Similar mods coming soon. Lol How many miles on the motor if you don't mind me asking
Southbay Verse 30k
about 40k
thanks
are you high? listen to the count
gayýyyy 👬vette jump like a mofuggin frog cmon ladies pls next time take professional driver.
That was 385 wheel
Yea 420 wheel and 405 17° of timing so if you felt like adding more you could squeeze 430 wheel depending on intake and exhaust
how much???
got any dyno numbers with this cam? i just ordered this cam for my 2009 Pontiac G8 GT