Even een vraag/dubbelcheck: Deze past dus mooi feilloos op de ATX-655, en past ook binnen de kooi, die heeft namelijk een binnenmaat van 65cm wat het minimum is om deze binnen te kooi te kunnen gebruiken, correct?

looks good how can buy those?

@fitnessseller

Жыл бұрын

This product has since been renamed to the ATX Curved Jammer Arms. They are available from ATX dealers worldwide. Find your dealer on www.atxfitness.com/find-your-dealer/

hello what thickness // what screws are used on this cage please thank you

@fitnessseller

Жыл бұрын

The Barbarian Line products are no longer available since 2019 and have been replaced by the ATX racks and accessories. But the ATX racks and accessories have different hole size and hardware size (21 mm holes for 20 mm hardware) so they are not compatible with the old Barbarian Line racks (which had 26 mm holes for 25 mm hardware).

2x2 or 3x3?

@fitnessseller

3 жыл бұрын

These were made for our 75 x 75 mm (3x3") Barbarian Line racks, however this series has since been discontinued. We now offer the ATX Curved Jammer Arms which are compatible with all 60 x 60 mm uprights up to 80 x 80 mm uprights (with 21 mm holes).

@EatShytake

3 жыл бұрын

@@homemusculation9360 the Lever arms will work with 2 inch spacing with 7/8 holes (slightly smaller but larger than 5/8 holes) racks with 1 inch diameter holes is too big. Simple hack: find your self a 1 inch sleeve to properly fit a 1 inch rack. I have a 2x3 upright poles with 5/8 diameter holes and 2 inch spacing from Northern lights fitness.. it would work because the pins are too large. In all, it will work with PowerTec racks

@EatShytake

3 жыл бұрын

@@homemusculation9360 Np.. however, id suggest Body-Solid jammer arms (they will work with your powertec rack)

@fernandoramirez9584

3 жыл бұрын

will these arms work with a prx squat rack 2x3

@EatShytake

3 жыл бұрын

@@fernandoramirez9584 PrX racks standard 5/8 holes with 2 inches spacing. It won't fit with their 7/8 lever arms. Id suggest Body-Solid Jammer arms (note: Body-Solid jammer arm will fit with 3x3) however, 2x3 will work as well. But youll have 1/2 or 1/4 inch space in the mount bracket. So, simple hack; cut a 2x3 from a gym stall rubber mat. After that you're golden