Andis T-Outliners How To Fix Adjust Them For The Best Performance
Andis T-Outliners How To Fix And Adjust Them For Best The performance, in this video, Larry the Barber Man demonstrates how to adjust the tension spring in your Andis T-Outliners to ensure that they’re cutting at their very best if your Andis T outliners are not cutting. The step by step instructions in this Andis t outliner adjustment video will help any barber get the job done without any fuss!
For more from Larry, the Barber Man don’t forget to subscribe to the channel and head over to www.Instagra.com/larrythebarbe... and / larrythebarberman for more - Larry provides regular, free information about taking care of your clippers and powering US clippers abroad. You can also email him directly at info@larrythebarberman.com
Blog post: larrythebarberman.com/blog/an...
/ larrythebarberman
/ larrythebarberman
www.larrythebarberman.com
=================================================
Email info@larrythebarberman.com
=================================================
Barber Videos: www.barbers.tv
=================================================
www.larrythebarberman.com ( My Online Store )
=================================================
Barber Blogs: www.frequency60hz.com/blog
=================================================
Hair Clipper Converters: www.frequency60hz.com
info@frequency60hz.com
=================================================
Пікірлер: 107
I have only one critique.The camera should've been zoomed in a lot closer. He keeps saying "NOW YOU CAN SEE" but I can't really see 😐
@RaveXmusic
4 жыл бұрын
True that bruh.
@dep7up
Жыл бұрын
@@RaveXmusic bruh that true
@judesepulveda682
Жыл бұрын
That pissed me off so much
Best video explaining how to adjust the trimmer. 👌🏼
Aaaaand my problem is solved .... great video, thank you Larry.... this video brought a pair of my t-outliners back from the dead...
Dude I'm high as fuck watching this, lol
thanks for taking the time to make this video! ! you helped me have my t outliner set perfectly
Just did this adjustment last night...works like a charm, takes a bit of playing with to get it right but amazing results! Thanks Larry
Worked like a charm! Thank you!
You are amazing. Brought my clippers back! I kept zero gapping and had zero results, but I adjusted the tension spring and they are slicing like they used to!
Thank you so much!!! This video was VERY helpful
Thanks Larry The Barber Man. Now my tension is perfectly set
subscribed a few weeks ago , love this channel !
Excellent video ! You have saved me money !
Good job Larry!
Mandem u saved me from throwing out my liner fam… love
Awesome video mate. Appreciate it.
Thank you, Larry!
Thanks for the info!
Awesome gona have to try this out
this was the best tutorial ever
Awsome guide
Thank you, Larry. I've had such bad luck with these trimmers. I've had them used on me in barbershops, and watched them in videos cutting flawlessly. But mine never cut. I've sharpened the blades, set the blades, and never got them to work properly. I think this may be the problem. I won't give up on them.
nice work brother
Love your accent from London
nice work
Thanks for the great video. I was very close to trashing mine and buying a new one.
Great video, can u tell what is the power converter are you using
legend, must do this as I dropped mine
I'm going to try this
Good stuff
Can you please do a video on the Styliner II's?
#BOOM Thanks bro!
i just got a wahl 5 star liner , how can i get it to its best performance ? i been working with andis t outliner trimmer and no problem , but my new wahl 5 star is not as great , but so many friends have recomended it.. can you do a video on how to turn my new trimmer up ? thanks larry.
should you do this to the gtx trimmer?
Big machine 👌🏻
Where can you find those kind of Screw Drivers? What should you do If the Tension Spring won't even and breaks trying to squeeze the curve part slighty?
do you use the stock blade or does anyone have a good alternative?
Hey bruv. I'm born in UK live in L.A. Went to London plugged in my andis without the converter and be em up. lol! What u think about the new Andis GTX T outliner?
i have new clippers and once the oil was added, the vibration was insane. how can i tune the vibration part down?
i want to buy this machine..when i buy it do i have to adjust it right away to get the cleanest lineup on my forehead
I have one that is vibrating very loud and shaking hard. What do i do because they are suppose to run almost silent
Where did you get the converter from ?
hi larry the barber man i wanted to request a video for a repair service for an andis fade masters when its clattering and replacement for broken teeth on the blade replacement. thank you
@larrythebarberman
7 жыл бұрын
Damion Suarez you need to push down bottom blade correctly on to the mount
Hello where can I buy the power adjuster thanks
Do yo modify your liners?
Bought your 60hz converter and my andis gtx and master is making a loud noise like it's not connected to a 60hz converter
Larry I got the transformer from you and its stopped working the car lighter bit still works but the battery seems dead can I get a replacement or fixed?
@larrythebarberman
3 жыл бұрын
Hi Connor, email me frequency60hzconverter@gmail.com and we will get it sorted
Excellent. What size screwdriver are you using?
@theoravelo136
Жыл бұрын
I use #1 Philips screwdriver
My t outliners turn on and you can hear the motor but the blade is not moving, any idea of what it can be? I already open it and cleaned everything, but still the same thing
@kk1780
5 жыл бұрын
Same
@kk1780
5 жыл бұрын
@DatKidKod a they were totally mashed up so i got new 1 and zero gapped it
If you loosen the screws that hold the stationary blade ,and shift The stationary blade down words it will do the same thing...... also when you stretch out the adjustment arm spring ,It tends to put pressure in a downward force on the stationary blade causing Unproper tension. The best way to explain this is having Center tension on the stationary blade. If the cutting blade has tension going upwards or down the words that's where it will fail in the long run
which power converter would u suggest to us?
@williamswink5144
7 жыл бұрын
Gio Rusia you dont need a converter in the US. US power IS 60 Hz
great video .
what causes the trimmer to pull or snag hair?
@CarlosGonzalez-jv2rn
7 жыл бұрын
top screw to tight
@williamswink5144
7 жыл бұрын
Carlos Gonzalez and i still havent seen a video addressing that problem! i do like a lot of other barbers ive seen and take the screw out and wrap them with electrical tape..
Between this and the blades never being zeroed when you buy them new, I wonder if Andis has any quality check system. Seems like they ship new clippers all out of whack. 🤔
@bL3dbL4k
7 жыл бұрын
True. I bought 5 from Amazon. Only 2 cut good. Same adjustments to each. It's a hit or miss with each Outliner. And you rarely get one perfect out of the box.
@nathanjohnson8990
6 жыл бұрын
This is why I'm switching to Wahl detailers
@Staboogie777
3 жыл бұрын
Just got mine brand new and they cut like garbage smdh
@ruminating1596
3 жыл бұрын
I think they do it because your common consumer is an idiot and would slice their head open and try and sue the company. SO the only true way to zero gap your blades is by voiding the warranty. Therefore, they can prove you altered them and they are guilt free.
@TraumaER
3 жыл бұрын
@@ruminating1596 wouldn't be surprised. And you got idiots using these clippers for other parts of the body and wind up finding a way to cut off something else. But yeah, I still have these going on 10+ years. Got a new blade just once. Use them a lot now since I cut my own hair again for last year and line up my own hair with them.
I've adjusted my tension spring and seem to have set my blades right but my clippers still don't seem to cut? Could they just be faulty?
@BL-pv7et
3 жыл бұрын
Hello did you oil the blades
@BL-pv7et
3 жыл бұрын
Maybe you have the tension screw to tight that would stop the blade from moving
how do you zero gap and is masters ?
Would be nice if u end it off buy cutting some one hair or u r hair to see if it really work I'm not doing that to my clippers I been cutting good with them same clippers for years now when I first got it out the box
Sooo where the PDF link at????
does anyone know the name of the tool he's using to adjust the tension spring?
@Wiggaway318
7 жыл бұрын
needle-nose pliers
@travionwashington4753
7 жыл бұрын
Wigga thank u very much!
@peterangel9186
7 жыл бұрын
travion washington needle nose pliers
It's the same rattling sound as hos before and after. At that point, he knew he fudged up. Lol
Sometimes when I'm cutting with the T Outliners it tends to not cut. It makes a loud noise and sound like something is getting stuck in the blades. What's the cost of that?
@sebvaja8571
8 жыл бұрын
i know what u mean like you bald out and it makes a weird noise ? both my andis have done that dont know how to fix tried this video but made it worse
@darthclone7
8 жыл бұрын
+Seb Vaja but is it still cutting good though?
@sebvaja8571
8 жыл бұрын
+darthclone7 they cut but feel like the pwer has been zapped
I jus put a sponge in mine to reduce the sound
@kingmecutsaaron4252
7 жыл бұрын
Gav M does that increase the heat?
@gavinactivateja3869
7 жыл бұрын
Naa
@dtchevy7317
6 жыл бұрын
Where u put the sponge at?
"a-shoe-men"
@thevibestation5174
7 жыл бұрын
The LPS Man I read it right when he said it 😂
@thelpsman953
7 жыл бұрын
Zugy 😂 I couldn't even pay attention
@IMCHRIS13
5 жыл бұрын
lmfaooo
sounds exactly the same!
Larry the barbaman (Jamaican voice)
Good video but need better angles
Just bought this.the motor getting crazy hot ,3-4 minutes after i start cutting.is it normal?
@larrythebarberman
6 жыл бұрын
if it is not oiled
Rather annoying I had to line up the blades and adjust the tension to make this a quality pair of trimmers. Why can't andis just make them this way from the start?
@ssaini5028
8 жыл бұрын
+Bestoftherest222 I went with the Wahl Detailers, out of the box they cut much closer than the Outliner
@williamswink5144
7 жыл бұрын
Bestoftherest222 they dont send them out adjusted because if youre inexperienced, you can slice someone open with zero gapped trimmers. they work well enough for home use out of the box
How about you unplug the machine before you shock yourself!
Is it just me or did I just see him touch all the inside of the machine while it's plugged in? 😒😒
Salute
thanks for taking the time to make this video! ! you helped me have my t outliner set perfectly
nice work