Andis t liner how to fix when teeth don't move
T liner has power but teeth do not move. After i adjusted the spring my t liner started to work right away.
Interesting to note is that it cuts even better than when i got it out the box.
Please like, subscribe and share and comment below with your results.
Пікірлер: 189
This video is exactly what I needed, I’ve been trying to figure out this issue for years. You solved 3 years worth of headache in a 6 minute video!
@bunfiyah689
3 жыл бұрын
Glad to help and glad it works
5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.
@bunfiyah689
Жыл бұрын
😂😂 glad it worked cuz
I been looking rough for about a month. I was 5 minutes away from buying a new pair. Saved me 60 bucks!! Much appreciated
@Jeralddoerr
Жыл бұрын
60 bucks? You get yours off eBay... It's two years now so maybe it's inflation.. Mine where 100+
@user-bq2xu3mc1r
2 ай бұрын
@@Jeralddoerrcrazy, you could’ve got a nice cordless trimmer for 100
@Jeralddoerr
2 ай бұрын
@user-bq2xu3mc1r Yep... I own corded and the same version but wireless. Love them.
5 years later and this video is still saving andis clippers. Thank you bro!
Just got the Andis Stylist Combo & the T-Outliner blade wasn't moving out the box thanks for the vid just what I needed!
Skip to 3:10 you’ll thank me later. But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼♂️idiot
@Untinydancer
3 жыл бұрын
Thanks for the timestamped link!!!!!!!!!!!!!!!!!!!
@Jeralddoerr
Жыл бұрын
Lol... These are the best Clippers ever...
Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!
Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue
Thanks to this video it saved me a headache because I was about to throw this buzzer out the window lol
Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!
@bunfiyah689
4 жыл бұрын
Thanks a lot brother. I appreciate the love. God bless.
Thank you!!! You are the realist for giving all of us these helpful tools.
Had mines for over 10years and I was just about to buy a new one! Thanks bro
Dude thank you!!!! I had this issue for almost year after replacing my blade. Thanks for sharing, my andis T liner works great now !
Thanks man!! I thought my outliner was done but i followed your steps and it works!!
Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇
@bunfiyah689
Жыл бұрын
No worries. Glad it worked!
Thank you so much. Was just about to buy another one until I stumbled on this video. It really works.
My man, you just saved my some money. Fixed mine on first try. Funny enough it was the screws by the switch that had to be loosened. Thanks!!
Thank you bro! I was going to send mine off to get repaired but this worked perfectly.
This works. Such a quick and easy fix. I only had my timers for about a year.
Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good
@bunfiyah689
Жыл бұрын
Yes, this is accurate. I had to do that as well. Good tip to point out.
@Jeralddoerr
Жыл бұрын
I think that's when you want to adjust the silver tip outside with the flat head screws.
@km025
10 ай бұрын
🖤
Thank you, just fixed mines and they are working even better
Works like a charm thank you sir. You saved me $75
Hell yeah thanks man this is what was wrong with mine , cuts so good and sharp now thanks .
Thank you 🙏 it works now ,I had left mines in the truck and I believe from the heat the screw inside got super tight .loosened it up a bit and it works better than before
thank you was about to buy a new one. i try this and it works better than before
Exactly what I was looking for . Thanks for your video and much obliged.
Man your the best! I was this close to buying a new razor ‼️💯👌🏾
Exactly what was going on with mines, the switch was bad, I bypassed the switch and I'm good, better that buying a new pair ....👌🏾👍🏾
This helped out a lot. Thank you
Needed this vid, man! Came thru for me in the clutch. Much appreciated!
Great video. Just to add, I would try to line up the white ball just below the middle point. If it's too low that means its too tight.
THAAAAAAANKKKKKKK YOUUUUUUU!!!!! So grateful that you took the time to make this and share it. 💛✊🏽✊🏽✊🏽
great help, thanks for the direction, I just finished up working on mine and my dads!
@bunfiyah689
2 жыл бұрын
No problem. Like and subscribe:)
Awesome video. Thanks for the help!
Thnks I was able to fix my husbands clippers!!!!! Saved mad money
Totally worked! Thanks! Saved me $70...
A lifesaver man thank you.
Fixed. You the man, thanks my dude.
Tanks so much bro like it’s working better than before.
Helped me fix mine, thanks bro!
Nice job! Works like a charm
Thankyou this video saved me from going to buy a new pair of clippers
Thanks bro! Working even better.
This video showed me perfectly how to fix my Andis!
Thank you explained everything 10/10
Thank you bro!!! This just saved me another 40 from a haircut #godblessyou
This worked 100% you saved my weekend thanks a million. Thumbs up
@bunfiyah689
3 жыл бұрын
No worries. Like and subscribe.
Thanks going to try this in the morning. Mine went days ago.
Great vid thanx for that ...cant count how many new pairs ive bought
Amazing tutorial, worked like a charm!
@bunfiyah689
2 жыл бұрын
Glad it worked. Like and subscribe!
Dis a Game changer!! My Second pair was ready toss them like the first one back cutting like new
Much appreciated, sir! Thank you!!!
I was about to trash this clipper because it would not cut...now it's cutting again better than before 3 years old!!!
Thank you so much! It worked right away! Appreciate it!💪🏾💯
@bunfiyah689
2 жыл бұрын
No worries. Glad it worked.
Quick and simple, thank you
Works like wonder thank you man!
This video solved my issue thanks alot.
Thanks bro… worked perfectly for me…
You saved me $70. Thanks for sharing this
works perfectly you just saved me some money
@bunfiyah689
3 жыл бұрын
No worries. Like and subscribe fam.
This video came just in time. Good Looks
Saved me $60-70. Thank you❗️
Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.
It works !! Thank you
Thank you very helpful, just fixed mine. You saved me a $1000 Jamaican dollars.
@bunfiyah689
3 жыл бұрын
Bless up fam
@d3arb0rns
2 жыл бұрын
Sala mercy
Def worked for me! Thanks
great vid!! works wonders.
Thank you for this video, it worked for me!!
Thanks man great video very helpful
Thank u , saved me some dollars🙏
This worked Thank you!
Thanks for the video!
Blessings brother! Much thanks for this 🙏🏾
@bunfiyah689
10 күн бұрын
My pleasure!
Very helpful!! Thanks very much!
Thanks for the video. Saved me from buying a new one.
Good looking bro thanks a million!
Some say that the screw on the bottom to adjust it . But mine are like yours.. the very bottom part to adjust the blade from being even.. not to the very left or the very right .. and some people say it's the blades themselves.. coming from someone who modded their andis.. and it's been a problem since I first got it.. at first I thought it was the stainless steel blades .. upgraded and got a babyless blade on it.. compared to these blades .. and well I just want them to last for years.... And reason I got it for home cuts... Cut like butter the first few times . But still overheat...
Man than you so much. I was about to run out and buy a new one. It sounded like the motor was going out.
@bunfiyah689
2 жыл бұрын
No worries. Like and subscribe. Glad it worked.
This worked thank you for the video!!
Very helpful my brotha
It worked! Thanks.
Thank you and God bless!
Huge thanks man 👍🏽
I love hearing cp24 in the background 😂
@bunfiyah689
Жыл бұрын
😂😂😂
Man thanks so much 💯
Thank you bro I was about to buy a new one
Thank you!
Thanks the fix worked!
@bunfiyah689
2 жыл бұрын
No problem. Like and subscribe:)
Great video! I was ready to toss mine
@bunfiyah689
Жыл бұрын
Glad it worked!
Saved my ass appreciate it man 🤙🏾
@bunfiyah689
Жыл бұрын
No doubt fam
This video just saved my clippers
It work perfect, thanks
Than you , it's back working now
Thanks a mill!
Gracias!! It worked..!!
@bunfiyah689
4 жыл бұрын
De nada.
Great video! Only thing is it coulda been 3 min. Thx 🙏🏽
Helpful video thanks alot
@bunfiyah689
Жыл бұрын
Glad it helped
Good looking out
Appreciate that. Works like a charm now.
Perfect thanks!