Man you're the OG of clipper maintenance and repair. I wish I had seen something like this about 5 Tliners ago!! Thank you so much for this info. I've been using my Dad's wet knife sharpening stone to sharpen my blades and they come out super sharp and smooth as silk!!

he look like that white boy that fixed my headphones when i was locked up only cost me 1 soup cool as a fan ty cornbread appreciate it

@knockhello2604

4 жыл бұрын

This comment got me dying 😂 wtf lol. Nah it's fine tho

@terrycrews1760

4 жыл бұрын

j blue nigga how long you been out? Sounds like you been in the pen since the 90s talking like that.

@ChunkOcoal

3 жыл бұрын

@@terrycrews1760 lmaoooo

@100Franky

2 жыл бұрын

😭

@uhhFez

2 жыл бұрын

“Cool as a fan,Thank you cornbread”😂🤣😂🤣

Yo my man I've been watching other Barbers zero gap there trimmers but your the only one that's actually shown it step by step bro. THANK YOU!!!👍

Thanks man. I just gave my old outliner new life. I cut the top off like you showed us and did all adjustments. Now it cuts like new and looks cool. Thank you

Great video, nice and simple. Straight to the point. I wish every barber video was like this. Great job bro

Brooooooo.... I was stuck your one comment saying make sure you put the negative screw on first before the small gold piece and positive side second saved me lol. Thanks for the detailed video!

Def explained it fair n simple, i will be subscribing to your channel

Nail glue and floor tiles , ingenuity at its finest lol.... actually a great video, you were able to bring those t-outliners back from the dead guud sht

This was very helpful thanks for the video

Yee. Can't wait to get my T-outlinerz and start cutting.

the best video i watched learn the best now i can make use of my andis takes a lot..

I know it doesn't matter, but did you notice the switch-up of the red and black wires? Just wanted to say, I really do think your channel is underrated. You may not have the expensive cameras or flashy intros, like other more popular channels, but your explanation of the fade is the best I've seen. I've known to use the corners of the clippers, but you've explained the reason why for those that don't. The little details that are hardly ever mentioned, and overlooked by the veterans, need to be taught to those coming up in the barber life. Just wanted to say thank you and sorry for the long comment.

You have really good and informative videos. I do my own line ups and sometimes cut my friend's and nephew's hair, so I am not a serious barber, but it's still good to learn from your content. I do electrical work for a living as my main job, so I have a lot of knowledge with electricity. Just FYI, those 2 wires aren't positive and negative. The black wire is the hot that gets power from the outlet, and the red is the switched hot that feeds power to the motor when the switch is on. The white would be the neutral.

@illestofdemall13

5 жыл бұрын

@@KZreadBarberAcademy As long as you put wires back where they came from it doesn't necessarily matter what they're called. As far as barbering I am not interested in doing it as a career. I just like to cut my friend's hair every now and then. Built-in obsolescence is why we have to keep buying new ones. They don't make things to last like they used to. I wonder what kind of degree they'd want to hire someone as a designer.

@ThaRedPitbull

4 жыл бұрын

@@illestofdemall13 I have a question for you. Yesterday as I was cleaning my Andis T Outliners I somehow broke the red wire from the little metal thing that the screw is in. I don't have soldering equipment so I just stripped the wire back and wrapped it around the screw. It works again but what problems may I come across since that little piece of metal is gone that the screw originally went through? I hope I'm making sense. img.kzread.infoWaN2ifH5iF0/hqdefault.jpg It looks like what's on the end of the wires in the photo.

@illestofdemall13

4 жыл бұрын

@@ThaRedPitbull If the wire is secure under the screw then it should be ok but the terminal makes for a more reliable connection.

Thanks for sharing those tips! ♡☆. Now i figured why mine were hitting at they should after i changed the blade.

Real good video man appreciate that you had the idea to upload it ...respect !

Wow tile sharpening to get by i would have never thought of that!!!

I wish I could have found this video before I donated my old outliner to the thrift store

Nice idea of barber job

I have seen other videos where they mention to trim them down, so they won't get too hot, which makes more sense, you don't have to trim them down to make adjustments, they do get warm/hot in about 10 minutes

Super helpful

Great video to follow

Good playlist

Good job man

Wouldnt a dremell with a cutting disk work? Im going to cut mine down and replace the blades. Thanks for the "how to" .... Also, one set of my Andis outliners gets blazing hot and I opened them and it looks burnt on the copper wire thingy with plastic over it. Any ideas?

Hey KZread Barber, Did everything you said cept for the skeleton part (which imma do) but now my tliner is leaving lines??? Is is because i set the blade on wrong? Also REALLY appreciate your Fade tutorials started on my sons a couple of months ago 👌🏽👌🏽👌🏽. Got me feelin like a barber wit all the compliments 🔥🔥🔥

Your videos are excellent my man! Subscribed. I'm looking at a second pair of T liners and doing this modification on my older set with a fresh blade. Is the primary reason to trim them down, so you can control the tension?

@currentresident7760

2 жыл бұрын

I have seen other videos where they mention to trim them down, so they won't get too hot, which makes more sense, you don't have to trim them down to make adjustments, they do get warm/hot in about 10 minutes

I want to know if I can modify the Andis t outliner with babyliss pro fx 707z blade

Great video.... Questions.... why is that my t outliners andis overheat/gets hot.

Did the same thing to a pair of old t outliners i just bought. Cleaned them changed the blades , cleaned the switch & skeleted them . I may have gone wrong somewhere bcuz when i try to screw the case down and the pressure applies the case overlaps the designated bracket trenches and when i turn it on the case buzzes like mad. Can u recommend any fix for this ?

Love the Bills hat Go Bills.

@kmack282

4 жыл бұрын

We are all Patriots

Thanks you helped

Thank you!

Got my T-Liner on point!

Have you had any charging issues?? I think I need to either replace the lithium battery, the charger cord, or the charger base... but it wont hold a charge anymore after 22 months. #SUGGESTIONS??

How do you keep your cutter blade in place when you screw your blades back on ?😮

Interesting!!!!!

so does zero gapping make your trimmer hit like crazy and leaves thos white marks on the hairline?

Good VIDEO

Let’s Gooooo 💯 k!

To make the blade more even you could rub it on a grind stone it will also sharpen the blade as well.

@raultavares1202

5 жыл бұрын

SARSX452 what about a file ?

Over the years the quality of Andis Clippers had went down drastically but the prices have went up🤬👎👎

@gstacks510

4 жыл бұрын

That's a lot of things though...

What was the Achievement?

Man my t outliners suuuuuuck right now!! Pulling hair so bad!! I'm gonna try this tomorrow as soon as I get to the shop!!! Praying it works because I'm ready to toss them shits in the garbage!! Lol!! Great video bruh!! Barber love from Michigan!!🍀💈🍀💈🍀💈🍀💈🍀💈🍀💈🍀

@TheAGODAMI

5 жыл бұрын

Jeff the Barber * **WhaT websiTes do yoU uSe to oRdeR youR equipmenT fRoM bRo posT soMe linKs foR me pLeaSe.!??** 🙏🍻

@jeffthebarber8259

5 жыл бұрын

I actually order from a catalog.... Williamsport barber supply. I have an account w them...

@beaubell5638

5 жыл бұрын

I'm in MI too bro, what did u end up doing to them? About to modify mine tonight.

@SoloACE88

4 жыл бұрын

DETROOOIIIIITTT✊🏽

I have some items to send you. Where can I send them?

Can you do my clippers?

Appreciate the education bruh.

Been a cosmetologist for seven yrs and just got a pair of these a couple months ago, before I had always used the oster t finishers which suck ass compared to these (why didn't I discover the t outliners yrs ago is beyond me) but anyway this sounds like a dumb question but what is the purpose for cutting off the plastic top? And what would cause this trimmer to pull fine hair?

What if that tension arm will not snap down mines has no tension

@iam_gdot7467

4 жыл бұрын

Go to Larry the Barber man he has a video on that.

Is it safe to use in terms of electricity and wiring?

2:46 my girl loves when I do that

Do you have an idea where I can buy the older model of the Andis T Outliner like you have in this video,I have been trying to get it but they keep shipping the newer model to me. By chance do you have the model number,I will appreciate it if you can help me with the model number of this older model so that will help me in looking out for it.

@mvrdamonxy7942

4 жыл бұрын

They don't make them like that anymore what they shipping you is what they make now only way your getting a older model is if you buy a used one. Why do you want the old one anyways?

Will the andis gtx blade fit the t outliner

@reythebarber9070

5 жыл бұрын

I broke my regular blade yesterday and here they only have gtx blades in el salvador is harder to order things onlin shipping is too expesive so will the T ouliner work good with the Gtx blade? I really apreciate you help man

Large hacksaw is not the best to cut them with, use a Dremel, that's the best way to cut it.

Dude get a flat whetstone and some honing oil to sharpen the blades

@smiley-dr5qn

5 жыл бұрын

And this is a barber academy, going back to jeezy 360

@Phillygoon79

4 жыл бұрын

Buddy the smoker up the block that is an “expert” at everything for $10.00. FoH those blades weren’t centered at all, lopsided weight distribution is why the blades wear uneven. Smh. Barber Academy? More like meth shop

@erixgarcia5166

3 жыл бұрын

Awwh hell naa mayneeeee ajaja thats some rrona typashet

Could u do my andis t outliner like that???

Waht about oil

Go dj 4:46 😂

Nice presentation, please control the BACKGROUND NOISE as it detracts from what you are trying to present.!!

A Dremel with a cutoff wheel would probably work better

@asankasanjeewa7216

4 жыл бұрын

I wont to this naching, but how to get this it

My man just completed surgery

Why cut the top off?

Bro i owe u lunch

Hey bro. Do you know if the gtx blade will work on the og t-outliners?

@Netbanga

5 жыл бұрын

Logan Johnson of course they do

@loganjohnson4257

5 жыл бұрын

Thanks man. I thought I had regular t ouliners but judging by the stock comb pretty sure theyre gtx anyways

and oh on the floor are you sure bro?

Alright man, so you got this andis t outliner, and ITS SUCKS! And yerrr mad!! Lmaoooo FAX

@TheAGODAMI

5 жыл бұрын

Barber Cisco 661 **WhaT wouLd yoU recommend bRo I'm new to this shiT buT thaT's the saMe misTaKe I madE.???** 😒😠

@phabeondominguez5971

5 жыл бұрын

@@TheAGODAMI look into the Wall Detailer man, also T-Outliner is fire once you zero gapped it, takes all of 2mins.. oNe

Need to work on the focus

Bills mafia

I hate that design of switch these clippers should be made with a toggle switch.

@pLaCiDMoOoN

4 жыл бұрын

Having issues with mine... now I have to modify it.

Jesus is coming back very soon🥰🥰

Paul Wall face ass. Good video though

reminds me win use to sharpen shanks in prison.n staples to make tatto needles.n then .burn em to sanitize needs n alchohol wipes from imfirmery

@Daconnect5

5 жыл бұрын

michael bling sure you been to prison. We believe you 👎

#crescentmoon

You think your weather is cold? Look at your super bowl record

Good Men! holdon well

just make sure that you buy a new one

Cool vid but Half the video was shot outside the frame.

did mine with a dremel much faster

@LeonardVidaureAKASkinner

5 жыл бұрын

@MrEddieBarber have you heard of the Andis Pivot Pro? I have those and would like em to hit, but they're not set up like the T outliners.

@DONTCALLMETHAT

5 жыл бұрын

I did mine with a Dremel too.

Gobills!!!!!!

Dremmel tool

Your technique for setting the tension on the spring arm really needs improvement. It's not just a matter of pushing the spring down but adjusting the nylon ball to properly meet the cutter blade opening.

newsflash: the hacksaw is not the best tool for this job. invest in a dremel / rotary tool. thank me later.

Ac

I'm glad you're not a mechanic.

Did he just slide a clipper on the ground ?!!!!!! Ok im out

@19jc80

5 жыл бұрын

Sharpened it against a stone. I know it's a difficult concept to grasp, so difficult even our cave ancestors had this idea long ago. The first cavemen actually had a meeting about sharpening objects on stone and one guy said "I'm out." He failed to find a suitable mate because all his shit was dull and the men who used stone gained an advantage. He perished long ago, glad you are here to keep his spirit and memory alive.

@TuxieTude

5 жыл бұрын

@@KZreadBarberAcademy I'm new here. What a nasty attitude. Geez.

@elijah3977

5 жыл бұрын

@@TuxieTude facts. Like wth is up with dude. buddy can't take a joke 😒

New barbers......NEVER.....EVER...Slide your clippers on any surface!!!!!! This guy is a nutcase for that. If the board saw this he would lose his license immediately, (if he even has one).

@Jackofalltrades874

5 жыл бұрын

You won’t get fined for sharpening your blades

@dannyboii19891

3 жыл бұрын

KZread Barber Academy bro that dude seriously just needed to talk shit about your video, instead of just not typing shit. But thanks for your video it helped me out a lot.!

Bro have you been in jail? You know to much

@dannyboii19891

3 жыл бұрын

Lmao

If u have to do this then u prob shouldn't buy it 🤣🤣🤣

@blkschizo

4 жыл бұрын

That's crazy. There isn't a set of clippers known to man that barbers haven't modified to get better performance out of. Out of the box settings just don't cut it with these.

Dam I thought only black dudes use the T-Outliners.

@amadeus5403

4 жыл бұрын

Every race uses those andis and wahl are the biggest trimmer manufacturers in the world along with ConAir(Babyliss)

@joec4334

4 жыл бұрын

Only black dudes use the t outliners? WTF🤔🤔🤔

stalker alert

Wow. Really. On the floor? I wouldn’t want that blade on my head. No bueno.

@topnotchbarbertv9523

5 жыл бұрын

Thats why they have disinfectant spray js

@Jackofalltrades874

5 жыл бұрын

Tai Quality y’all must have never dropped your guards on the ground.... sterilize it and keep it moving

@davidmartin-mybeautifullif21

4 жыл бұрын

Tai Quality I was thinking the same thing😊

Ain't nobody got time for all that

@sean5520

5 жыл бұрын

Daconnect5 If you had time to watch the video, you have time to follow the steps I would think, especially if it will bring some of your trimmers back from the graveyard

@Daconnect5

5 жыл бұрын

Ace OfFades if you don't get your corny ass outta here 😂😂😂😂

lol u be listening to 2012 ass songs

Yeah just sharpen your clipper on a dirty ass floor and go and cut someone's hair.🤦🤷

Sloppy and unnecessary to do most of what you did. Watch a video or 20 before you make another video duke.

On the floor? If you do something why not doing it properly? You are a butcher.