Andis Masters Hair Clippers: Tuning, Service And Repair For A Kick Ass Performance
Тәжірибелік нұсқаулар және стиль
Tuning & Service your Andis Masters clippers for a kick-ass performance, after a fall, or in general. After the fall of this Andis Masters hair clipper, it doesn’t have to be the death of it or a strain on your wallet. In this demonstration, I will show you how to perform a full service and hair clipper repair on your Andis clippers that aren't cutting on an Andis Masters so you can get a kick-ass performance so they are at their best once more - without having to call Andis customer service.
If you liked this tunning and services tutorial, be sure to subscribe for more interviews, lessons, and other fantastic free barbering content. I’d also like to invite you to follow me on Instagram @larrythebarberman as well as check out my Facebook page at / larrythebarberman pages for other free barbering content. You can also email me at info@larrythebarberman.com.
USEFUL BARBER LINKS
/ larrythebarberman
/ larrythebarberman
www.larrythebarberman.com
=================================================
Email info@larrythebarberman.com
=================================================
Barber Videos: www.barbers.tv
=================================================
www.larrythebarberman.com ( My Online Store )
=================================================
Barber Blogs: larrythebarberman.com/blog/20...
================================================
Hair Clipper Converters: www.frequency60hz.com
info@frequency60hz.com
=================================================
Пікірлер: 240
Tears of joy! These clippers have put my mother Andy I through beauty school over 20 years ago and when I dropped them my heart broke because my mother passed away shortly after she graduated. Thank you so much for helping me bring them back to life!! They are really all I had left of her and I thought it was over. Thank you again from the bottom of my heart Larry! - Angela
@glennharaldsen3222
6 жыл бұрын
And I* sorry I was literally crying😂
@courtneywilson1373
3 жыл бұрын
Thanks for the help
@rain3743
Жыл бұрын
Mine too! I dropped and jacked them up and hadn't done anything with them. I am gonna try this.
I have a pair that’s 16 years old, still working, just replaced cord and adjusted them and they still work like new. Andis is the master!
@larrythebarberman
3 жыл бұрын
GOOD STUFF!!
@Moeonit
Жыл бұрын
Me too but 22yrs strong and both pair of outliners too
Thank God for people such as yourself!! My clippers have been broke for nearly 3 years after a fall, I tried my luck searched some videos and boom you were the first video I watched and now my clippers work. Amen!!!!
Larry, I cant tell you how long I've looked for a video breaking it down step by step like you have done here. Man, thank you so very much!
@larrythebarberman
6 жыл бұрын
your welcome!!
@blacafrikan9876
4 жыл бұрын
Thank you
@theoldbigmoose
3 жыл бұрын
You saved my clippers to Larry! I wish the cord on the Andis Masters was a softer more flexible silicon though.
Larry many thanks this was a a game changer. I restored my 20+ yr old Andis Master clippers with a new motor and replacement parts. After taking the entire thing apart I couldn't get them to cut right. It turned out I hadn't adjusted the tension correctly. Thank you so much for showing this. Much blessings stay safe !
THANK YOU LARRY! My Masters were acting funny so I looked at the Andis videos and Ivan calls the "2 hole screw" the "Dont EVER touch" screw, instead of explaining its function... which is helpful if you want to understand your equipment!! Turns out the mechanism reset is EXACTLY what my machine needed! Thank you again!
@angelawalters1975
4 жыл бұрын
William Swink for real !!! Everyone has always said do not open up your masters it ruins your warranty and they make you so scared of it thank you Larry for teaching us how they actually work makes our job so much easier
@angelawalters1975
4 жыл бұрын
Everyone has always said do not open up your masters it ruins your warranty and they make you so scared of it thank you Larry for teaching us how they actually work makes our job so much easier
I know this is an older video, but this helped me fall in love with the Masters. Thanks Larry! I like to tinker with my clippers and the Masters really have a lot of tuneability in them. I found after watching this, that I can run the power higher, with slightly higher tension and they really blast through hair. It effects heat slightly, but regular oiling definitely helps. I think this clipper is overlooked in 2023 because of their maintenance needs. I feel like its actually a benefit
Video was a big help waiting 3years to find a video like this mate appreciate it now my clippers are gonna be on another level 🙏🙏🙏🙏
Larry I just want to say that you are doing an amazing, amazing job with your channel. The content that your provide is relevant, in depth, practical and also inspirational. Barbers like myself (and I believe many in the industry) gain so much from your work. Your presentations are so well communicated and so easy even for the layman to understand. It really shows how much you prepare for the videos that you make. I'm surprised to see the numbers of views that you are getting. More people should know of Larry The Barber Man! I'm a barber from Malaysia and the guys here back home all know of your stuff. Just wanna appreciate you and thank you for all that you're doing. It made a difference for us! Keep up the good work (:
Bro, dude you seriously saved me a lot of money man. I loved how my clippers worked before they fell and this brought them back instead of buying new ones. Thanks so much!!!
Larry broke it down he even has props!! 🔥🔥🔥🙏🏽
Thank you Larry, I was clueless before I watched this video.
Took me a couple times to get it right. Also watched other people’s videos incase steps were missed here. When I came back and followed your steps again, my clippers came back to life. Thanks bro!
@rdeepu7778
5 жыл бұрын
MorningBlubber
I started watching because of the accent. I kept watching because of the knowledge. Excellent information and exhibition!!!
Larry, I've "tuned up" my andis clippers before.. but never like this. I learned more in your video than ever before. You got yourself a new subscriber. Thx
Best clipper repair EVER hands down!seriously. Everyone else says to never touch that adjustment 🤨... now my clippers are running great!
BEST VIDEO on tuning a Andis Master... my clippers where bogging down even with a new blade and after all the quick fixes on KZread... nothing until this video Thank You My Masters are running BEAST MODE!
Thank you so much!!! You saved my clippers!!! I was about to order a new pair!
I thought my clippers were done for...Thank you!!!!!!!!
Great video Larry. Your video helped me understand hair clippers. I had no Idea it was such an easy design. Very little troubleshooting involved. Thumbs up for sure 👍
Just tuned mine and it worked perfectly. I was about to buy a new pair. Thanks for this!!
This man broke it down to ABC!!! Wow 🙏🏽🔥
Thank you Larry I drop my Clippers yesterday they where not running right now they are running great thank u again ....
@larrythebarberman
3 жыл бұрын
Your welcome 🙏
Thank you Larry! My Andis Master's tension screw kept getting loose. You're instructions helped tremendously
Thanks Larry💈 you bring my masters back to life
Thanks for the info I found my old Andis Masters and this helped me tune them back up. Now they are cutting lie new again.
One of the best videos replaced the blade and the middle cutting blade won't move back and forth it was only moving to the right so I turned the screw and watch the blade go back and forth fixed it now it is quiet before it was loud and only the blade moving to the right
Hey Larry, do you have any tips on dealing with the heat from the Masters? Thanks!
I have the same clippers! I appreciate this!
Perfect explanation... thanks man
Thank you bro, finally took my masters out of the the cabinet and tuned it. Working strong as day one. Miss the power out the corded version.
Thank you so much. I was just getting ready to take my clippers to the repair shop. Now I won't have to.
Dope video. Thanks for the help!
@larrythebarberman
4 жыл бұрын
DoubleD2500 Your welcome 🙏
know I know why your name is Larry The Barber Man cuz you the man...
Thanks Larry. Your video gave me confidence to fix my Andis today myself. I just needed the right size screwdriver. The so called Only repair facility in Malaysia was too hard to deal with.
Great frickin job man my clippers are great
I was unable to lift the “fork” up. But I followed everything else by adjusting the power and tension screw , and they seem great anyways !
@Numbr1beast
4 жыл бұрын
The fork on my clippers wouldn't lift either. Maybe we both missed something?
great tutorial. I hope I am gonna fix mine which I just received as a brand new instead of OPENED NEVER USED.
thank you! I was so lost and knew their had to be a way...
Thanks Larry! It worked! I was about to buy some new clippers cause i thought there were too old.
This exact video helped me pit today! So thankful!
Awesome thank you Larry!
Larry. You ARE the man !! Just a quick question ... are you moonlighting as an Andis engineer assigned to assist the masses?
@larrythebarberman
3 жыл бұрын
Not at all 🤓
Thank you. I had dropped mine and last time that happened I had to send them out. This time I got them back in order myself.
Thanks To Larry I was able to fix my andis fade master, really helpful video and channel, appreciate it 👆🏾🤟🏾
Subscribed. Awesome video🤟🏽🙂
Thanks for the heads up on what to do if or when a person drops their Andis Master Clipper. Much appreciated that Video, thx!
Excellent job Larry..Thank you.
Solid video, found super old andis mastwers in my garage and got them back to what feels like brand new. love it
I wanted to thank you for your videos. Your videos are simple to follow and your techniques actually work. I'm glad I found your channel. Have you done videos on how to clean the blades; especially how to remove buildup on them? Thanks
Thank you! this was very helpful.
@larrythebarberman
4 жыл бұрын
silvia goicochea I am glad to hear so !!
Worked for me! Thank you!!!
Since I've don't it the clippers are not as quiet at they were when I bought them and I've done everything you did....and the bottom blade seems a little crooked and loose but if it tighten it anymore it won't move???
@helpfulthingspracticalwisd5777
5 жыл бұрын
Matt Loomis kzread.info/dash/bejne/amur1NBroNSWnJM.html
thank you Larry The Barber Man.
Thanks, and hey done a grate job with your hair cut
Legendary! Nice one brother
Very helpful vids man.... just wondering if you could do a breakdown of the cordless seniors?
Super job!!!
Good shit brother !!
Thank you soo much! You are the man Larry
Thank you this truly saved me money .!
tanx larry i will follow your procedure mike
I was hoping you were going to say, if you loose your screws then you’re screwed :) great tutorial
Great video. I was just about to send in my masters as they are making the loud vibrations and not cutting. I will do as you suggest in the video and I up to be back up and running soon.
I'm having trouble with my cordless masters pulling, do you have any tips to stop that???
Thanks for the knowledge fam
very helpful video
thats some good intel, im gonna give it a shot tomorrow , thanks !!!
Informative thanks I'm going to give my clippers a tune up.
Hi pal how are you? I have a wahl it miking too much noise when I turn the screw down it stop the noise bout the blades it stop working. Do you know what to do? Thank you!
Great video.also like the Ronald McDonald screwdriver set
My man!!! I needed this video!!
What kind of blower is that..and thank you for video
What is the brand of the air compressor called? Great video help me alot thanks for the knowledge
@maddskills89
5 жыл бұрын
i have the same question
@maddskills89
5 жыл бұрын
Xpower Airrow
I replaced my metal blade with a ceramic. Now when I'm cutting, when it goes into the bulk it will randomly shut off for a second or two. My masters are maybe a month old. Any ideas why this is happening? Thanks!
Thanks this helped me so much. I put some oil on my clippers from Manila and it froze my shit up. I was scared for a second. Again thanks so much.
@larrythebarberman Questions when the clipper comes with a foam gaurd does it need it or can you remove it..
great video!!! now my masters cut like butter & are whisper quiet
Thank you for this great video. It helped me a lot!
im having thr same problem with the t outliners can u do a video on the t outliners as well .i dropped them
Hey Larry! What is that plug in air blower called?
@A1ExtraSauce
5 жыл бұрын
DataVac Computer Cleaner🙏🏾💈
Incredible thank you so much.
Excelente 👏
Exactly what I needed thanks
Thank you SOOOO MUCH
Cool video Larry I liked and subbed brother. blessings to you.
Larry, I dropped my AndisM a while back & now they're stuck in ON position, so I have to plug & unplug to turn off & on looked inside but my dumbass can't figure out how to get the switch to move back & forth. I know I'm just overlooking something, If you could help me out, it would definitely be appreciated.
Thank you
I had bought some of these off a friend and I dont know why but I get a real strong shock from my hand all the way into my elbow when I cut someone up
Thanks Larry you helped me totally f**k up my clippers. Watched 3x followed to a T and now they are noisy as hell and cut even worse
Thank you very much.
@larrythebarberman
6 жыл бұрын
Your Welcome!!
so when I get the andis masters fresh out the box, do I need to rotate the screw on the side counter clockwise?
Thanks
Great and accurate explanation.!Thank you.!!
@larrythebarberman
6 жыл бұрын
YOUR WELCOME!!
Great explanation...
Great video man! Question: I adjust everything as you say and the clippers seem to be running good but then when I get cutting and adjusting the blade for cutting length, the clippers start to mess up and ultimately the blade stops sliding back and forth at certain points when I adjust the level on side.
Thank you. My clippers would start that chatter and drive me and my wife crazy.
Hey Larry nice video!! Got a question for you tho, what kind of blower is that? Can you post the name or link? Thanks bro
great one brother
hey larry! love the vids! could please do a performance check vid with the andis magnetic guards please? my masters run fine with no guards, but the as soon as i put em on, they can end up rattling unbearably! any help will be appreciated! thanks!