Nice job on the video! Really helped me out. I saw another one and they forgot to mention the part where you take the tension off the cables.

Just getting ready to put a Maxxum on a tracker, hopefully my new one won’t need adjusting. If so this was a big help, anyone that didn’t get anything from this video evidently aren’t handy, don’t listen or road the short bus! Thanks again.

Just the video I was looking forward! Thank you sir

@OneObjective

Жыл бұрын

Your welcome

I’ve got an 06 Nitro with the original MotorGuide trolling motor. The directional arrow is way off. I received some guidance on how to adjust the arrow…and if that doesn’t work…the tech says he’s just put a piece of duct tape on the cap with the ore t orientation. Seems simple enough if disassemble either fails or ends up in the “too hard to do” pile. Your mileage may vary.

You are the hero homie. Mines been driving me crazy with it being all the way down going straight 😂😂

@HP-tr2cd

Жыл бұрын

Was it easy?

@swamp2saltoutdoors935

Жыл бұрын

@@HP-tr2cd yes, just take your time. First time I did it, it didn’t work out and I gave up. Few weeks later I did it again only thing different was I pulled the peace he talks about all the way up and it worked.

Man, this was sooo helpful. Great video.

Thank you, it worked just as the way your video showed...

Having the same issue on mine. Thank you for the video bud, I’ll tear into mine today !

@r.l.hulbert3476

2 жыл бұрын

Good luck, info 👎

Great video keep up the good work

Thanks I didn’t know about the screw on the foot peddle

Where can u buy the arrow and stuff for the trolling motor

I would have like to have seen you actually make the adjustment. Showing me the inside of the head and telling me it’s super easy doesn’t give me what I need.

I want to know how to adjust the pressure it takes to move the pedal

I have a question my maxximum 80 # 24 volt my pro turns slow and when I change from 01-30 it still turns slow would that be the mother board please let me know

After the direction dial is rotated, pedal is level, the motor is facing forward, and covers are put back together...Do you then re-tighten the foot pedal screw back to the original desired tension?

Would you happen to know if I disable the motor (propeller) would the unit still be able to spin around? Want to use my old one as a livscope stand alone mount.

I want to know how to adjust foot pressure needed to move the pedal 4:04

I just got my first bass boat on Saturday and it's my first boat and trolling motor. I understand how the trolling motor works however the pedal is tilted all the way forward and it's almost impossible to operate. I thought it was broken but it seems maybe I just need to adjust the pedal? Do these instructions work with the base model edge 45? Thanks!

Thanks because mine was all screwed up ...all the way forward was like 3 o'clock.

@OneObjective

2 жыл бұрын

Glad we could help

Thanks

Will any of your mounts for the 1103 work on my kaku Zulu?

@OneObjective

2 жыл бұрын

Do they have the four bolt pattern for the powerpole

@downsouthallah4800

2 жыл бұрын

@@OneObjective yes sir. I was looking at your non actuated torqueedo mount the square looks bigger but I mean if all kayak brands use the same size for the power pole should be good then.

My fortrex when I take my foot off the pedal and the power is constant it will turn one way or the other so I can’t even retrieve bait or measure a fish without screwing up my spread of planers how can I tighten the tension up. New subscriber 😎

@michaeldonaldson5322

21 күн бұрын

Buy a Troll Perfect

Yours looks opposite from the until to the propeller

that told me nothing ,

@Okinanam69

Жыл бұрын

You took the words out of my mouth.