Great video demo. One correction. It doesn't send a signal to a satellite. GPS satellites are constantly sending out a radio signal. The delay you are getting is the GPS RECEIVER in the trolling motor control locking onto the satellites and calibrating. It also likely gets a DGPS signal if your accuracy is to 1 foot. So to be clear the trolling motor does NOT send signals to satellites in space.

@highschoolfishingcentral7753

5 жыл бұрын

Thanks.

Nice video of the foot pedal and "issues." I highly recommend an on/off switch from the battery to the troller as the button provides a false sense of security in protecting the head unit. Also I'm a big believer in being able to pull off the motor to both store and then not have on when trailering.

Excellent, just what I was looking for.

@highschoolfishingcentral7753

2 жыл бұрын

Great to hear!

Very useful video EXCEPT : I wish you had the camera focused on the foot pedal when you were touching it... I'm V I S U A L and really need to see the buttons that are being pressed. I wanted to see the lights on the MODE and the ones on the left, so I could remember them on my Ulterra. I had an ISSUE with my battery dying on my ( Ipilot remote ) and couldn't stow the motor. If I had the foot control installed I would have a SECOND option. So NOW I'm bringing my foot control along next outing. Thanks Again.

Wow I wish I had fishing in my high school! I actually went to Edgewood in Ohio but any ways I just bought my the terrova I pilot and when I push the anchor button it says SL TMP on my remote. It will stay in spot lock for maybe 5 minutes then kicks out. Also I cant find the calibration setting anywhere on my remote. I thought I paired my GPS puck but maybe I didnt do it right. If not could that cause these problems? Thanks

@highschoolfishingcentral7753

4 жыл бұрын

You should call Minn Kota's customer service.

Can you use the fob/remote or is this strictly foot pedal only?

@highschoolfishingcentral7753

4 жыл бұрын

It came with a remote but I never use it. I know many people swear by the remote but I prefer to have both hands free.

Will that fit in a recessed foot pedal pan, it looks rather big width wise.

@highschoolfishingcentral7753

4 жыл бұрын

I think it would be too large to fit in a recessed pan. Also, there are several features on the foot pedal that you would not be able to click with your foot if it is recessed.

@Raven09s

2 жыл бұрын

Mine is in a recessed pan

Wife here,( I did this)accidentally deployed while still strapped down. Status is flashing red. Won’t go up or down. Tried the off, on, hit power switch three times... any other ideas?

@highschoolfishingcentral7753

3 жыл бұрын

Go to Minn Kota Website and search. I know there is a way to reset the Ulterra.

lol it's not "sending a beam to a satellite" it's receiving signals from multiple satellites constantly, and uses a minimum of 3 satellites pinging distances to determine it's own location on the globe. also, in case you think your phone "goes to space and back" it doesnt, they use local tower signals unless you're using a satellite specific phone, which are incredibly expensive and used mostly by military, government, and backcountry adventurers.

@highschoolfishingcentral7753

3 жыл бұрын

Ha, thanks for the clarification.

With spot lock, do you need talons/power poles?

@highschoolfishingcentral7753

5 жыл бұрын

The spot lock is great for deeper water. It actually works best when the wind is blowing - when the wind is a whisper the spot lock struggles. The Talon or Power Pole is used in water less than 10 feet deep. If you want to flip to a laydown for instance.

@fishingismydrug1

5 жыл бұрын

@@highschoolfishingcentral7753 Thank you very much for your reply !

How to you set depth when deploying in shallow water? So you don’t hit bottom!

@highschoolfishingcentral7753

5 жыл бұрын

You can hit any of the 3 buttons at the "heel" part of the foot pedal to stop it from deploying any farther.

Next year they are coming out with "spot pizza" ! You hit spot lock, and then hit it again....and a pizza restaurant boat senses your position and delivers a nice pizza for you. maybe a beer as well. Revolutionary !

I dont recall mine being so loud on the stow, when your deploys, that is how it is supposed to sound. Something isnt right.

@highschoolfishingcentral7753

5 жыл бұрын

Hmm, I have never heard another one so I have nothing to compare it to. LOL

@Boatright

5 жыл бұрын

Here is a link to another video showing how it should sound, if you registered it you should have a 2 year warranty, I would have it looked at. kzread.info/dash/bejne/c6qpk5SYiLTKd7w.html

@highschoolfishingcentral7753

5 жыл бұрын

It doesn't seem to be making that noise for me anymore, I wonder if it was just a little misaligned when I shot this video?

@Boatright

5 жыл бұрын

Figured out the cause of that sound. Your belt is not running within the guides. I just had my trolling motor require some service today and I asked him about yours and said that within the motor unit, it has a guide that keeps the belt in place, if it continues to make that sound, take it in for service work, as the guides could cut the belt. I would suggest taking it in anyways to have them double check and show them the video of what it is doing. Also, on the Ulterra they have an upgraded motor unit with new seals that will stop water from getting inside of the unit, they may change that out for you too for free, if you are still under warranty. If you registered your motor, you will have a 2 year warranty.

please point camera to where you are pointing

Your high school has a FISHING TEAM?

@highschoolfishingcentral7753

3 жыл бұрын

Yes

That wind is brutal on the audio

@highschoolfishingcentral7753

2 жыл бұрын

Sorry about that. I actually purchased a nice microphone shortly after making that video.

Batavia NY?

@highschoolfishingcentral7753

4 жыл бұрын

No, Illinois.

Doesn’t sound right. When it was stowing sounded kinda funky

stopped watching as soon as I started...wind noise

@robertspeakman8107

3 жыл бұрын

Video very helpful thanks . I put the same motor on my old 690 Ranger. Nice job on the video .👍