Thank you for your videos. I have been in the automotive field for years yet I am still learning.

@macsboneyardbuilds

3 ай бұрын

Thank you. I'm just a guy who enjoys wrenching, figuring out solutions, and sharing anything I figure out along the way.

I've gotta do a cluster swap in the coming weeks so when I pull my dash I'll come back and let you know!

@macsboneyardbuilds

Жыл бұрын

It's not hard at all. Thanks for checking out the channel!

@ufster2398

11 ай бұрын

How’d the swap go?

Wow, that was super simple. Nice video, new sub.

@macsboneyardbuilds

9 ай бұрын

Thank you. I appreciate you checking out the channel and subscribing!

2:48 took note of my mileage and was able to have a guy put the original miles on my Escalade cluster

@elchinolas777

8 ай бұрын

That’s what I’m looking for How much did he charge you ?

Good video bud! That's what's I appreciates about you's! Question for you... What about the odometer matching miles for miles? Thanks

@macsboneyardbuilds

Жыл бұрын

For now I just documented the miles on the cluster vs what I actually have. You can change the miles in the cluster but you have to have access to the software, cable etc. There are companies you can send it off to for a fee to correct it. I may do it in the future, but I have no plans on the truck going anywhere anytime soon. Thanks for checking out the channel!

You have a 03-05 cluster now in your 06/07c Now you will have a permanent battery light and no prnd indicator

@macsboneyardbuilds

3 ай бұрын

You're correct. Learned of the difference after the fact. All the gauges are working, so the light doesn't bother me.

I just got an '03 Tahoe. I'm used to working on older trucks. My previously ''newest'' rig is a '71 GMC Jimmy. My instinct would be to disconnect the Battery before switching out any dash components. I'm wondering why you leave it live?

@macsboneyardbuilds

28 күн бұрын

Sure, it's never a bad idea to pop a cable before doing work. The dash is signals from the pcm and bcm. Both are giving off no signals when the trucks off. And it's plugs so the probability of anything touching is very slim. But your right being safe is never sorry.

Yo that for the vid man. What year Escalade was the cluster from?

@macsboneyardbuilds

Жыл бұрын

This one was out of an 03 I believe. 99-02 have a different plug than the 03 and up. I also learned the 06/07 have a different read out of PRNDL so it is not showing up on my 07 classic but it doesn't bother me much. I believe this is also why the battery light suddenly turned on. But all the gauges work great including the trans temp. Thanks for checking out the channel!

My question though, did the transmission gauge start reading since you didn't have one before with just hooking it up?

@macsboneyardbuilds

7 ай бұрын

Yes, the trans temp will work for all models. Even if yours originally did not have the gauge.

My gas gage does not work. My oil pressure is always pegged even when the truck is shut off. Sometimes my speedo stays at 60 when the truck is shut off so when I am doing about 40 it says I am doing 120. 2005 GMC Sierra.

@macsboneyardbuilds

4 ай бұрын

May be a combination of sensors and cluster. Oil pegged at 80 usually means bad sensor. Pegged at 0 is usually a bad cluster. The gas gauge could be could be the sender in the tank or the gauge in the cluster. The speedo would more than likely be the cluster or the VSS signal from the transmission. An OBD scan tool that can register the oil and speed would help you determine those. The fuel gauge I would either try another cluster or see the OHM reading coming from the sending unit. If it's stuck wide open it will be stuck at 250, I believe. Hope this made sense

@MitchellTheOperator

3 ай бұрын

It's all stepper motor and cold solder joints in the board. I can repair your cluster for $300 and even add led lights

Mahalo nui!!! What is approx price of a rebuilt gauge cluster? If anyone can throw a guess. Where I am at we do not have many or any boneyards anymore. And what is needed to get the trans gauge working if my 03 did not come with one?

@macsboneyardbuilds

Жыл бұрын

There are several rebuilders online and on eBay. I would read reviews and pick one with a lot of good reviews. The trans temp provisions are already in the wiring. Mine reads the trans temp, and my original gauge cluster did not have it.

I put an 03 Escalade cluster in my 04 Silverado 1500 and the only lights that worked were my engine light and blinkers. Literally nothing else worked. Any suggestions? Thank you

@macsboneyardbuilds

3 ай бұрын

Yeah, that's weird. Your high beam, tow/haul, etc should all be cross compatible. Did you get to see the cluster working in the escalade?

Does it have a to be specific year cluster? Or just relatively same years?

@macsboneyardbuilds

3 ай бұрын

They are grouped 99-02, 03-04, 05-07. They will work across the groups, but some things will be weird. Like the PRNDL indicator, battery light (like mine), etc.

What year did the cluster come out of

@macsboneyardbuilds

Жыл бұрын

Believe it was an 04'

I pulled the dash off of my 03 and the name was Peggy

@unpluggedgarageliftercam9714

7 ай бұрын

4/06/04 Peggy There are many like it but this is mine!

@HobbitOfChaos

7 ай бұрын

Mine too 10/12/05 ottowa onterio

What was the purpose of noting the milage? I was under the impression that you were going to change it to match your old one.

@macsboneyardbuilds

7 ай бұрын

The milage can be corrected with the proper software, GM Tech II or a high end obd scanner. It has a hefty price tag, and for a novice like myself, I can not justify purchasing it. There are services on eBay that will do it for you for a fee or possibly a mechanic near you. I noted the milage difference just so I would know what the difference is.

@kelvincampbell2523

7 ай бұрын

@@macsboneyardbuilds thank you.

Would this fix my 02 silverados fuel gauge issue,it goes from F to E even though it’s never on a empty tank and the low fuel message comes up as well

@macsboneyardbuilds

5 ай бұрын

The two I would look at are the gauge cluster and the sending unit in the fuel tank. If it's moving around crazy I'd gamble the gauge. If it's pegging to one side no matter how much fuel is in it, I'd say sending unit. To confirm the sending unit, you would need to get under the truck and find the wires going to the tank. Probe the sending unit wire and see the OHM resistance it's putting out.

@MitchellTheOperator

3 ай бұрын

You need a 99-02 cluster they are different plugs and computers.

I'm wanting to do this swap in my 02.....What range years do I need for my swap...I'm assuming 99-06?

@macsboneyardbuilds

8 ай бұрын

So, the cluster will work across 99-06, but there are differences. They are broken down by 99-02, 03-04, 05-06(07 classic). In my case, I put an 03 cluster in my 07 classic. All gauges work, and it functions as it should, but I have no PRNDL and a constant battery light due to different charging systems and displays. It doesn't bother me, but to be 100% functional, get a cluster in your same model year group.

Dose the trans temp gauge work?

@macsboneyardbuilds

Жыл бұрын

Yes. The wiring for trans temp is already in the factory wiring harness.

I got a 2002 suburban,what year Escalade cluster will fit my suburban?

@macsboneyardbuilds

4 ай бұрын

Should be 00-02. Others would work, but some lights may stay on, like my batt light. And the PRNDL indicators are different.

Will this work on a 2000 yukon xl?

@macsboneyardbuilds

9 ай бұрын

Yes. The cluster needs to come out of a 99-02 though. The cluster would work for other years, but some functions may be weird. My battery light is stuck on since my swap cluster was out an 03, and my truck is a 07 classic. They used two different types of alternators, so the cluster isn't reading my alternator correctly. But all the gauges work fine.

So no programming required?

@macsboneyardbuilds

Жыл бұрын

Nope, the trans temp wiring is already there as well. Just make sure you get one that matches up. 99-02 I believe we're different than the 03-06. You can have them programmed with the correct milage, but I plan to drive mine until the frame breaks, so it doesn't bother me.

What year caddy cluster??

@macsboneyardbuilds

Жыл бұрын

I believe it was out of an 03 or 04

I did an Escalade swap many years ago. My gauge pod has stainless rings around every individual gauge. It looks much better than yours.

@macsboneyardbuilds

4 ай бұрын

Your style is the best one, I agree. They had several different style escalade gauges throughout the years.

Did anyone miss the battery light on??😭😭😭😭

@macsboneyardbuilds

6 ай бұрын

Nope, have another video on that too. Wound up being due to the cluster being from a different model year alternator. Good eye 👍

Do it matter what year Escalade you pull it from ???

@macsboneyardbuilds

5 күн бұрын

Yes, the cluster I used was from an 03, and my truck is an 07. They used different alternators so I have a battery light on. It works, but just have the dummy light. The years are grouped 99-02, 03-04, 05-07 classic

@RVP_redbull

4 күн бұрын

@@macsboneyardbuilds thanks man much needed

@macsboneyardbuilds

3 күн бұрын

No problem

Can’t get airbag light off mine

@macsboneyardbuilds

Жыл бұрын

Is a scan showing service airbag from pcm?

@PhilTooTrill

Жыл бұрын

@@macsboneyardbuilds I have a 2000 mine don’t have the 03-07 dash

@macsboneyardbuilds

Жыл бұрын

Run a scan tool on the obd port to see if it actually has a service air bag warning, usually a sensor on the front bumper, or if the cluster is just acting up. My charging system is working fine, but my battery light is stuck on. I think it's a short in the cluster or since my truck is an 07 and the cluster was from an 03/04 it may not be happy with me.

Can you add a trans temp sensor and hook it to that cluster ?

@macsboneyardbuilds

Жыл бұрын

The factory wiring already has the provisions for trans temp. If you get an HD cluster or Escalade cluster, it reads the trans temp with no modification necessary 👍

@MitchellTheOperator

3 ай бұрын

I can add transmission temp to your cluster, it's as easy as wiring in a stepper motor changing the overlay and adding a needle.

Mine is Aldolfo 😂🤦‍♂️🇺🇸

Nancy lol

Battery light stayed on 😢

@macsboneyardbuilds

Жыл бұрын

Yep, have another video where I tried to track down the cause. The gear indicator is also not functional, I'm thinking it's got a short in the board somewhere. Good eye 👍

@josealvarez8888

Жыл бұрын

​@@macsboneyardbuilds what year escalade is that cluster from?

@Alex68dash

Жыл бұрын

@@macsboneyardbuilds gear indicators not working is not because you have a short. It's because your original cluster was from an 06-07 and those clusters don't have a digital gear shift indicator they have a printed gear indicator. If you're going to put a gauge cluster that has a digital gear indicator, those are only compatible with 03-05 trucks

@macsboneyardbuilds

Жыл бұрын

You're right, thanks for the heads up.

@Alex68dash

Жыл бұрын

@@macsboneyardbuilds also the gauge cluster that you have is an 03-07 cluster and 99-02 clusters don't use stepper motors, they use air core motor. So the title of this video should be 03-06