Thanks for checking out Mac's Boneyard Builds. If you are looking for budget minded, do it yourself style channel featuring hot rods, garage projects, and all-around DIY content; you found it. I am not a full-time content creator, so videos will be posted as life happens, but I will always try to keep you up to date on projects happening around the Boneyard Garage. I hope my projects inspire you to get your hands dirty, jump in with both feet, and tackle that project you have been wanting to start!
Пікірлер
Did your temp gauge work ? I am about to start a swap on my 98 tahoe and I was under the impression you need to keep the wiring and sensor off the 98 harness that went to the sender in the cylinder head. Single green wire I believe
@houstontaylor9799 my project has actually been idle for about a month. I knew I had 2 temp sensors on the 350 and tried the one on top. If it doesn't work, I'll be moving to the other, on the head.
bennett seems a little sleepy not gonna lie
He slept for about half of the ride
@@macsboneyardbuilds 😭
😂😂😂😂😂 yep dad gets no respect.
Nice work. I like how you kept it simple. 👍
Thanks. Just a nice reliable driver, that can party when you want 😀
Can it read recently deleted codes?
Not that I have found. It does show when a system is not ready/recently cleared. If you or someone else goes in and clears all codes, all emissions systems will show red in color. Once it runs and is driven, it will slowly start to check them, and if it's working properly, they will turn green. If something is still not fixed or corrected, it will stay red and throw the MIL light again.
Lol Rookies
Foghat kicks butt!!
🤘😎
Dude, they trust you. They feel safe enough to fall asleep while you drive. Would you rather they all tell you how to drive?
That’s the best time to look for blondes in red Ferraris. 😂😂
🤫
Please dont tiktok and drive. I have had to scrape many families into a ziplock bag because they were distracted by their phone.
Agreed. Phone was spun on the mount and no texting, editing, or posting while driving. That was done hours after.
Was wondering did it work
Been swamped with life lately, but I can confirm she does fire up and initial checks are looking good. I'm sure I'll have bugs to work out.
@@macsboneyardbuilds so to hear definitely understand that got the same over here but also was wondering how the emissions kuz I have to keep emissions too
Im leaving only the front o2 sensors on both banks, so i only turn off sensor 2 on both banks right? I noticed you turned off sensor 1 on bank 2
Yes, it was super late at night and I had a brain fart moment.Turn off Sensor 2 on both banks, leave sensor 1.
I wish you would make a video from the very basic beginnings, with a bare laptop and just windows open. Where to download what and opening programs up etc. You lost me right at the start. :( Good presentation though.
Look at my previous videos. I go over the programs, the bench harness, etc.
@@macsboneyardbuilds OK will do,thanks
Brake check. 👍
😈
Same man
Put your old cluster back on
😊
Thats preferred 😂😂
I don’t mind this lol I put me on a good sermon or some oldies and just be chillin
Your their zone of comfort❤
Always announce youll wake up in another state
#transporteractivate
Dadlife for real!
Yup....looks about right 😂😂😂
As a single mom, I feel this pain too. 😂 when we're heading home and everyone's snoozing, I'm up front nodding off and jealous that I can't lay back with a pillow
Yep, add a light rain and it's so hard to keep going.
lol back in the 80’s we had a conversion van , reclining captains chairs windows with blinds and curtains and tables with cup holders and a tv/vcr it was like a living room on wheels . The shocks felt like you were floating and between that and the sunlight on your face it was dreamland for myself & the 4 kids .. my husband had to pilot solo 😴
I don't care who's driving I'm not going to sleep.
Same
We are the only Uber drivers that give a tip.
Wait till your turn on GPas day
Fatherhood can be a lonely road, but they love you when you get them there. 😊
😂 when my mom wanted us to stay awake with her. She’d SLAM the brakes 🤷🏽♀️
Deer! Didn't you see it? Lol
i thought it was the mom recording but nah she’s sleep too 😂😂
Man I can not wait to experience fatherhood like this
I can only sleep if my man is driving too😊❤
The one you can't see is the one playing a DS or other handheld in the back corner.
That was 30 min before the video
I like it better that way anyways
😂
Last time I realized everyone in the car was asleep aside from myself, I was sitting in the back seat.
HOL UP
Man same, we ended up hitting a Prius. My dad said he knew what he was doing so it must have been the Prius's fault.
@@JoshRossRogan guess my reply didn’t go through. Anyway, we were fortunate not to hit anything, and I woke them up as soon as I realized.
Holy crap, wake up!
I'm fighting the gas gauge in a 96. The purple wire runs from the pump into a connector under the brake booster. It continues into the firewall pass-through block, straight to the gauge from what I understand. I've followed the lt1 swap instructions but still cannot get the gauge to read correctly. Once the wire is hooked up, the needle points at the temp gauge...lol. I still don't understand why the purple wire needs to feed into C2-38 - so what connects to the wire going into the gauge if it's a direct feed?
@jway156 I'm still fighting it as well, haha. So I've figured out the sending unit sends 18-248 ohm signal, but the gauge is 0-90 ohm. So the pcm recalculates the numbers and it has to be corrected in the tune. An express van uses the same and needs segment swapped or copied over in the tune. I'm working on another video if I can ever get it going.
Battery light is on
Yep, wrong year cluster. Difference in alternators; it's charging though so not bugging me too bad.
Do it matter what year Escalade you pull it from ???
Yes, the cluster I used was from an 03, and my truck is an 07. They used different alternators so I have a battery light on. It works, but just have the dummy light. The years are grouped 99-02, 03-04, 05-07 classic
@@macsboneyardbuilds thanks man much needed
No problem
Dude don’t pour that thing near your soil !
That's why you rinse, and rinse, and rinse some more.
I remember when Awesome’s marketing team used “It gets blood out of concrete!” As a selling point and I’ve always wondered how and why they knew that. They were marketing to serial killers?
Corpse cleanups a thing those guys need a supplier
There's an oil stain on my parents driveway it's been there for 45 years and there has been over 100 people claim their stuff will remove it and it's still there oh Caster Oil super clean works without brushing it
It's not perfect, but it does a really good job, super cheap, and if you clean it up asap, it takes it off really well. And yes, super clean is some good stuff!
@@macsboneyardbuildswhat's it called?
I wonder about adding it to a pressure washer. If it does that well just like that, some extra force may make a difference.
I bet it would.
Fine, now what about the crack
Which one 🤔. My driveway is in need of replacement something fierce.
Doing this today! No f-ing way!
Dollar tree for the win
Nice work ❤
Thanks
Lol or just walking to your kitchen and grab the dawn and wash it 100%away😅
I've had pretty good results with dawn, too, but la awesome seems to break it up faster. Just my two cents.
Excellent video seriously excellent tip thanks so much
For sure. It's not 100%, but it does a really good job.
❤"Thats Awesome!" No pun intended 😂
I see what you did there.